Answered: shaft with a diameter of 50 mm and a…

shaft with a diameter of 50 mm and a length of 1300 mm with a safe shear yield strength of 20 N / mm2 is subjected to 565 Nm of torque. What is the torsion angle and applicability? (G = 80GPa)

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.7.10P: What is the maximum power that can be delivered by a hollow propeller shaft (outside diameter 50 mm,...

See similar textbooks

Related questions

Q: Calculate the maximum permissible torque on a hollow shaft if the maximum allowable shearing stress…

Q: Two designs for a shaft are being considered. Both have an outside diameter of 70 m and are 900 mm…

Q: The load on a bolt consists of an axial thrust of 10 kN, with transverse shear force of 6…

Q: What is the minimum diameter of a solid steel shaft that will not twist through more than 6° in a…

Q: Q3 A solid shaft produced from 1045 steel must be 200 cm long and must survive continuous operation…

A: Given data: The length of the shaft, L=200 cm. The time of operations, t=1.5 years. The load…

Q: A hollow steel shaft 2304mm long is to be designed to transmit a torque of 28350 kJ. The shear…

A: Given data: steel shaft long (l)=2304mm transmit torque(T)=28350KJ Shear modulus of…

Q: A muff coupling connects two shafts to transmit a torque of 135.6 N-m, the diameter of the shaft is…

Q: A circular dis of lead of radius 150 mm and thickness 50 mm is reduced to a thickness of 25 mm by…

Q: PROBLEM 1. A hollow cylindrical steel shaft is 1.5 m long and has inner and outer diameters…

Q: An SAE 1040 Cold Drawn Steel shaft is subjected to a Torque of 1,200 lb-ft. If the design factor…

Q: (a) maximum principal stress theory (b) maximum princ

A: given: in the design of shafts made of ductile materials subjected to twisting moment and bending…

Q: A solid titanium alloy [G=114⁢ GPa] shaft that is 950 mm long will be subjected to a pure torque of…

A: Given that G=114Gpa=114×103Mpa L=950mm T=195 N-m τall=145Mpa θall=30 min diameter on the basis of…

Q: hollow shaft with outside diameter of 14 cm and a wall thickness of 0.80 cm transmits 200KW at 400…

A: Given Data Do=14 cm t=0.8 cm P=200 kW N=400 rpm L=5 m

Q: Solid steel wrench (shown in Fig. 4) has a radius of 0.4 cm. and a length of 0.2 m. What is the…

A: Given, diameter of the wrench , d=2×0.4 cm=0.8 cm=8 mm Length, L=200 mm Allowable shear stress,…

Q: Two short shafts with identical diameters of 38.1 mm are connected by a coupling which is fitted…

Q: A propeller shaft for a small machine is made of a solid steel bar 104mm in diameter.The allowable…

A: Solution:- G=80GPa Twist angle=2.0° L=3.5m d=104mm To find: Maximum torque applied to the shaft,…

Q: A hollow aluminum rod has a max shear stress of 0.075 GPa. What is the maximum torque that can be…

A: Given: The maximum shear stress is τ=0.075 GPa. The outer diameter is D=0.8 m. The thickness is t=5…

Q: A flanged bolt coupling consists of six 10-mm diameter steel bolts on a bolt circle 300 mm in…

Q: A solid circular shaft will be 2 m long, and its diameter is to be determined. It is made of steel…

A: When a solid shaft having diameter 'd' and shear modulus 'G' is subjected to pure torsional moment…

Q: Calculate the maximum torsional shear stress that would develop in a solid circular shaft, having a…

A: Given Data : Diameter lf shaft(d)=32 mm=0.032 m Transmitted power(P)=95 KW Speed(N)=525 RPM

Q: (+) А 12 mm В с 750 N-m 125 mm 25 mm 200 mm D 300 mm

Q: 5.2 A hollow bronze shaft of 75 mm outside solid steel shaft of 50 mm diameter and of the same…

A: Note: As per our guidelines we are supposed to answer only the first 3 sub-parts. Kindly repost…

Q: A mild steel shaft of 50 mm diameter is subjected to a bending moment of 2000 N-m and a torque T. If…

Q: pplied torque of 1.5 Nm is found to produce an angular twist of 0.4°, measured on a length of 0.2 m…

A: Given data,hollow shaftD=50mm=0.05m so, R=0.025d=30mm=0.03mTa=1.5 Nmθ=0.4°⇒0.4×π180=0.006981…

Q: hardest point in the embedment A or B of the element shown in the figure. This bar is made of hot…

Q: Q.solid aluminium shaft 1 m long and 50 mm diameter is to be replaced by a tubular steel shaft of…

Q: PROBLEM 1. A hollow cylindrical steel shaft is 1.5 m long and has inner and outer diameters…

A: As per given question L=1.5m D1=40mm D2=60mm Modulus of rigidity =77gpa We have to determine a)…

Q: If a twisting moment of 10,000 lb-in is impressed upon a 1 and 3/4 inch diameter shaft, what is the…

Q: mild steel shaft of 50 mm diameter is subjected to a bending moment of 2000 N-m and a torque T. If…

Q: A hollow shaft of 1 m length is designed to transmit a power of 30 kW at 700 rpm. The maximum…

A: Given:Length of the hollow shaft, L=1 mPower transmit, P=30 kWSpeed of the shaft, N=700 rpm,Angle of…

Q: A shaft with a hollow cross section is subjected to torque of magnitude T = 5.5 kN-m. If the outer…

Q: Calculate the maximum and minimum shear stress in a hollow circular shaft of outer diameter 20 mm…

A: Given data T=92.7 N-mD=20 mmt=2 mmd=16 mm

Q: 4. A hollow shaft with outside diameter of 98mm if it is subjected to a maximum torque of 5758N-m.…

Q: What is the minimum diameter of a solid steel shaft where the allowable angle of twist cannot…

Q: Maximum shear stress developed on the surface of a solid circular shaft under pure torsion is 240…

A: Given data: - The maximum shear stress on the circular shaft is τ = 240 MPa.

Q: A hollow aluminum rod has a max shear stress of 0.075 GPa. What is the maximum torque that can be…

Q: B) Estimate the minimum shaft diameter according to the maximum shear stress theory for a shaft…

Q: A shaft is loaded by a torque of 5 KN-m. The material has a yield point of 350 MPa. Find the…

Q: esign a hallow shaft (Diameter and length) that develops 80 kN of power while rotating at a speed of…

A: Given: Hollow shaft,Power,P=80 kWspeed, N=4000 rpmangle of twist,θ=0.2oshear stress, τ=480…

Q: A motor is used to drive a gear assembly at 200 rpm. The main gear is in the center of a 1 m long…

A: Given, Speed of the shaft N=200rpm Length of the shaft=1m Diameter of the shaft=50mm Power acting on…

Q: Part A A shaft is made of an aluminum alloy having an allowable shear stress of Tallow = 104 MPa.…

A: As per given Allowable stress=104mpa Shaft diameter =115mm We have to determine maximum torque T to…

Q: 5.2 A hollow bronze shaft of 75 mm outside diameter and 12.5 mm thick is coaxlal Willl d solid steel…

Q: A hollow nickel-steel shaft, whose outside diameter is twice the inside diameter, is to transmit…

Q: A solid circular shaft will be 2 m long, and its diameter is to be determined. It is made of steel…

A: Disclaimer : “Since you have asked multiple question, we will solve the first question that is…

Concept explainers

Combined Loading

Any functioning component, such as machine parts, structural members, pressure vessels, and so on, are all under the influence of more than one force. When anybody is under the influence of more than one force such as shear forces, bending moments, axial forces, torsion, and so on, then such body is said to be under combined loading. A very practical example of combined loading is the crankshaft of an internal combustion engine (IC engine). The crankshaft of the IC engine is under high rpm, which is caused due to the torsional forces. Due to the presence of piston, counterbalances, and internal imbalances, the crankshaft experiences lateral forces and due to the rise in temperature, the crankshaft undergoes thermal expansion, which pulls the crankshaft along the axial direction and lateral direction. The presence of unbalanced loads along the periphery of the crankshaft also induces a bending moment.

Question

A shaft with a diameter of 50 mm and a length of 1300 mm with a safe shear yield strength of 20 N / mm2 is subjected to 565 Nm of torque. What is the torsion angle and applicability? (G = 80GPa)

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

What is the maximum power that can be delivered by a hollow propeller shaft (outside diameter 50 mm, inside diameter 40 mm, and shear modulus of elasticity 80 GPa) turning at 600 rpm if the allowable shear stress is 100 MPa and the allowable rate of twist is 3.0°/m?
Maximum shear stress developed on the surface of a solid circular shaft under pure torsion is 240 MPa. If the shaft diameter is doubled, then what is the maximum shear stress developed corresponding to the torque?
An automobile engine develops a maximum torque of 162Nm. The low gear ratio of transmission is 2.75, while the back axle ratio is 4.25. The effective wheels radius is 0.325m and the co-efficient of friction between the tyre and the road surface is 0.6. If the permissible shear stress is 32373 X 104Pa. Determine the maximum shaft diameter. Assuming that the load is nearly torsional. What is maximum load permissible on each wheel?
A drill rod with a diameter of 12 mm is made of high-strength steel alloy with a shear modulus of 80 GPa. The rod is to be subjected to a torque T. What is the minimum required length L of the rod so that the cross section at one end can be rotated 90⁰ with respect to the other end without exceeding an allowable shear stress of 300 MPa?
The rotation or twist in degrees of a shaft, 800 mm long subjected to a torque of 80 N-m, 20 mm in diameter and shear modulus G of 80,000 MPa is:
Problem 1: A circular shaft with a diameter of 100 mm and a length of 2 meters is subjected to a torsional moment of 500 Nm. The shaft is made of a material with a shear modulus of 80 GPa. Determine the maximum shear stress and the angle of twist along the length of the shaft. Problem 2: A solid circular shaft of length 3 meters is made of a material with a shear modulus of 60 GPa. The shaft has a diameter of 80 mm and is subjected to a torque of 600 Nm. Due to manufacturing constraints, the maximum allowable shear stress for the material is 60 MPa. Determine if the shaft design is safe and, if not, suggest an alternative design to meet the given constraints.
Consider a solid steel shaft with an allowable shearing stress of 58 MPa. Design the shaft to transmit 18 kW at a frequency of 70 Hz. The diameter of the shaft is ____ mm.
The material of a certain transmission shaft uses AISI 1030 HR, its yield strength is 260 MPa, the transmission torque of this shaft is 160 N·m, and it is subjected to a uniform axial tension of 0.5 kN. Please calculate according to the Distortion energy theory. The minimum shaft diameter with a safety factor n of 2.5 (to 2 decimal places).
A hollow shaft with outside diameter of 165 mm and wall thickness of 8 mm transmits192 kW at 400 rpm. What must be the angular deflection of the shaft in degrees if thelength is 5 m? The material of the shaft has a shearing strength of 210 MPa. Let G = 11.5 x106 psi.
A hollow shaft with outside diameter of 135 mm and wall thickness of 8 mm transmits 182 kW at 400 rpm. What must be the angular deflection of the shaft in degrees if the length is 5 m? The material of the shaft has a shearing strength of 210 MPa. Let G = 11.5 x 106 psi.
Bearing stress 4. Please provide proper discussion and illustration also complete solution and clear solution please thank you Determine the length of a square key to be used for a 3.73 kW, 1800 rpm electric motor if the motor shaft diameter is 35 mm and the width of the key is approximately one-fourth of the shaft diameter. The allowable shearing stress on the key is 2.45 MPa
A solid shaft transmits 1.7 kW of power at 4.4 Hz. What is the smallest safe diameter of the shaft if the shear stress is not to exceed 36 MPa?