[Standardization] A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCI, evaporated to incipient dryness, and quantitatively transferred to a 250 mL volumetric flask and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. [Analysis] A 30 mL unknown water sample was treated with 37.6 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. What is the concentration of CaCO3 of the unknown water sample in ppm? (MW CaCO3 = 100.0869 g/mol)? A 633.43 ppm CaCO3 B) 644.11 ppm CaCO3 (c) 626.71 ppm CaCO3 D 637.27 ppm CaCO3

[Standardization] A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCI, evaporated to incipient dryness, and quantitatively transferred to a 250 mL volumetric flask and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. [Analysis] A 30 mL unknown water sample was treated with 37.6 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. What is the concentration of CaCO3 of the unknown water sample in ppm? (MW CaCO3 = 100.0869 g/mol)? A 633.43 ppm CaCO3 B) 644.11 ppm CaCO3 (c) 626.71 ppm CaCO3 D 637.27 ppm CaCO3

Appl Of Ms Excel In Analytical Chemistry

2nd Edition

ISBN:9781285686691

Author:Crouch

Publisher:Crouch

Chapter9: Complexometric And Precipitation Titrations

Section: Chapter Questions

Problem 17P

See similar textbooks

Similar questions

A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCl, evaporated to incipient dryness, and quantitatively transferred to a 250 mL volumetric flask and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. [Analysis] A 30 mL unknown water sample was treated with 37.6 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. What is the concentration of Ca2+ (40.0780 g/mol) in ppm?
A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCl, evaporated to incipient dryness and quantitatively transferred to a 250 mL volumetric flask, and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was performed and was determined to be 0.4 mL. What is the concentration of EDTA obtained (MW CaCO3 = 100.0869 g/mol)?
[Standardization] A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCl, evaporated to incipient dryness, and quantitatively transferred to a 250 mL volumetric flask and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. [Analysis] A 30 mL unknown water sample was treated with 37.6 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. What is the concentration of CaCO3 of the unknown water sample in ppm? (MW CaCO3 = 100.0869 g/mol)? 633.43 ppm CaCO3 626.71 ppm CaCO3 637.27 ppm CaCO3 644.11 ppm CaCO3
[Standardization] A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCl, evaporated to incipient dryness, and quantitatively transferred to a 250 mL volumetric flask and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. [Analysis] A 30 mL unknown water sample was treated with 37.6 mL of EDTA. A blank correction was made and was determined to be 0.4 mL. What is the concentration of CaCO3 of the unknown water sample in ppm? (MW CaCO3 = 100.0869 g/mol)?
[Standardization] A 0.3045 g of CaCO3 primary standard was dissolved using concentrated HCl, evaporated to incipient dryness and quantitatively transferred to a 250 mL volumetric flask, and diluted to mark. A 10 mL of aliquot was then transferred to an Erlenmeyer flask, together with 5mL buffer and 5 drops of EBT indicator, and was used to standardize the EDTA titrant. The solution turned blue after the addition of 24.10 mL of EDTA. A blank correction was performed and was determined to be 0.4 mL. What is the concentration of EDTA obtained (MW CaCO3 = 100.0869 g/mol)? 5.050 x 10-3 M 0.1284 M 0.1262 M 5.135 x 10-3 M
A 5.00 mL tap water sample was measured out with a volumetric pipette, and added to a 25 mL Erlenmeyer flask. It was then titrated with a 0.0100 M Na2EDTA.2H2O solution, and found to take 0.635 mL of the EDTA solution to reach the blue endpoint.
A foot powder sample containing Zn was dissolved on 50.00 mL water and was titrated to the end point color with 22.57 mL of 0.01639 M EDTA at pH=4. (α= 3.61x109, KKzny2 = 3.2 x 1016). The pZn in the sample is:
A 50.00-mL aliquot of solution containing 0.358 of MgSO4 (FM 120.37) in 0.500 L required 38.08 mL of EDTA solution for titration. How many milligrams of CaCO3 (FM 100.09) will react with 1.00 mL of this EDTA solution?
A solid containing tris was dissolved in water and brought to a total volume of 50.00 ml. A 10.00 ml aliquot of the solution was titrated with 0.09978 M HCl to a bromcresol green endpoint. The aliquot consumed 38.93 ml of titrant. Calculate the weight of tris in the original sample.
Triplicate samples of NaOH was found to have concentrations of 0.1444 M (Trial 1), 0.1107 M (Trial 2), and 0.1160 M (Trial 3) upon standardization. a.) What is the appropriate primary standard and chemical indicator for this particular titration process? b.) If the volumes of NaOH used during the titration are 10.55 mL, 15.35 mL, and 14.50 mL for Trial 1, 2, and 3, respectively, what is the average weight ± SD of the primary standard?
A 500.0mg of butter was warmed and shaken vigorously with water. The undissolved material was removed by filtering and the aqueous portion was made 1.0M in HNO3 and 0.025M in Fe(NO3)3. This acidified solution was treated with 10.00ml of 0.1755M AgNO3 to precipitate the chloride ion and, after the addition of a small amount of nitrobenzene, 14.22ml of 0.1006M KSCN was required to back titrated the excess Ag+. Calculate the % NaCl in the butter.
A 30-mL portion of a solution containing Ca2+ and Mg2+ was titrated with 28.19 mL of 0.213 M EDTA at pH 10. Another 30-mL aliquot of the same Ca-Mg mixture was treated with NaOH to make the solution strongly alkaline and precipitate Mg(OH)2. This solution was then titrated with the same EDTA solution. What would be the required EDTA volume (in mL) to reach the endpoint of the second aliquot if it was found that there was 0.061 M of Mg2+ in the sample?