Solve Prob. 10−61 using the maximum distortion energy theory.
10−61. The yield stress for a zirconium-magnesium alloy is σY = 15.3 ksi. If a machine part is made of this material and a critical point in the material is subjected to in-plane principal stresses σ1 and σ2 = −0.5σ1, determine the magnitude of σ1 that will cause yielding according to the maximum shear stress theory.
Want to see the full answer?
Check out a sample textbook solutionChapter 10 Solutions
Mechanics of Materials, Student Value Edition Plus Mastering Engineering with Pearson eText -- Access Card Package (10th Edition)
Additional Engineering Textbook Solutions
Statics and Mechanics of Materials
Foundations of Materials Science and Engineering
Thermodynamics: An Engineering Approach
Degarmo's Materials And Processes In Manufacturing
Fluid Mechanics: Fundamentals and Applications
Vector Mechanics For Engineers
- in the design of shafts made of ductile materials subjected to twisting moment and bending moment, the recommended theory of failure is (a) maximum principal stress theory (b) maximum principal strain theory (c) maximum shear stress theory (4) maximum strain-energy theoryarrow_forwardThe displayed piece is loaded at 300 N with C in the positive x direction and 200 N in the positive y direction. The diameter of the US bar is 12mm. The part is made of AISI 1040 CD steel. Depending on the error at point A, determine the safety factor by the following methods.(a) maximum shear stress theory.(b) distortion-energy theory.arrow_forwardThe state of plane stress at a critical point in a steel machine bracket is shown. If the yield stress for steel is sY = 36 ksi, determine if yielding occurs using the maximum distortion energy theory.arrow_forward
- answer this ; The factors of safety predicted at point H by the maximum shear stress theory of failure (Tresca criterion)arrow_forwardIf a machine part is made of titanium (Ti-6A1-4V) and a critical point in the material is subjected to plane stress, such that the principal stresses are s1 and s2 = 0.5s1, determine the magnitude of s1 in MPa that will cause yielding according to (a) the maximum shear stress theory, and (b) the maximum distortion energy theory.arrow_forwardInternal loadings at a critical section along a steel drive shaft are given. If theyield stress under tension and shear are S_y = 800 MPa, respectively, determine the maximum length of the shaft using the maximum-shear-stress theory (Tresca yield theory) in a way that the shaft does not fail neither at A nor at B. (DON'T COPY OTHER ANSWER)arrow_forward
- The 304-stainless-steel cylinder has an inner diameter of 4 in. and a wall thickness of 0.1 in. If it is subjected to an internal pressure of p = 80 psi, axial load of 500 lb, and a torque of 70 lb · ft, determine if yielding occurs according to the maximum shear stress theory.arrow_forwardIf sY = 50 ksi, determine the factor of safety for this loading against yielding based on (a) the maximum shear stress theory and (b) the maximum distortion energy theory.arrow_forwardWould you kindly answer this question. If the shaft must have one uniform diameter, determine the required minimum diameter of the shaft if the normal yield stress in the composite shaft must not exceed 450 MPa with a factor of safety equal to 1.8.arrow_forward
- A cylindrical pressure vessel has an inner diameter of 5 ft and a thickness of 3/4 in. The stress capacity of the pressure vessel is 25ksi. If a safety factor of 1.2 is required for the design, determine the maximum internal pressure (in psi) it can sustain. A-36 steel with the following properties: Modulus of Elasticity, E = 29x10^3 ksi or 200 GPa Shear Modulus/Modulus of Rigidity, G = 11.5x10^3 ksi or 79.3 GPa Poisson's Ratio, nu = 0.260 Temperature Coefficient for thermal expansion, a = 6.6x10^-6/°F or 11.7x10^-6/°Carrow_forwardDetermine the diameter of a red brass C83400 bar that is 8 ft long if it is to be used to absorb 800 ft # lb of energy in tension from an impact loading. No yielding occurs.arrow_forwardCalculate the maximum shearing stress developed in a phosphor bronze spring having mean diameter of 150 mm and consisting of 24 turns of 10-mm diameter wire when the spring is stretched 180mm. Use A.M. Wahl's formula and G=42 GPa. Group of answer choices 24.336 MPa 36.689 MPa 48.778 MPa 12.233 MPaarrow_forward
- Elements Of ElectromagneticsMechanical EngineeringISBN:9780190698614Author:Sadiku, Matthew N. O.Publisher:Oxford University PressMechanics of Materials (10th Edition)Mechanical EngineeringISBN:9780134319650Author:Russell C. HibbelerPublisher:PEARSONThermodynamics: An Engineering ApproachMechanical EngineeringISBN:9781259822674Author:Yunus A. Cengel Dr., Michael A. BolesPublisher:McGraw-Hill Education
- Control Systems EngineeringMechanical EngineeringISBN:9781118170519Author:Norman S. NisePublisher:WILEYMechanics of Materials (MindTap Course List)Mechanical EngineeringISBN:9781337093347Author:Barry J. Goodno, James M. GerePublisher:Cengage LearningEngineering Mechanics: StaticsMechanical EngineeringISBN:9781118807330Author:James L. Meriam, L. G. Kraige, J. N. BoltonPublisher:WILEY