Connect Access for Fluid Mechanics
Connect Access for Fluid Mechanics
4th Edition
ISBN: 9781259877759
Author: Yunus A. Cengel Dr.
Publisher: McGraw-Hill Education
bartleby

Concept explainers

bartleby

Videos

Question
Book Icon
Chapter 13, Problem 50P
To determine

(a)

The dimension for the circular channel.

Expert Solution
Check Mark

Answer to Problem 50P

The diameter of the circular channel is 3.446m.

The depth of the circular channel is 1.732m.

Explanation of Solution

Given Information:

The water flow rate is 10m3/s and the bottom slope is 0.0015

Write the expression for the volume flow rate of the water.

  Q=anAcRh2/3So1/2  ...... (I)

Here, the manning coefficient is n, the constant is a, the hydraulic radius is Rh, the bottom slope is So and the cross sectional flow area is Ac.

Write the expression for the radius of the semicircle.

  Rh=AcP...... (II)

Here, the diameter of the semicircle is D.

Write the expression for the area of the circular channel.

  Ac=π8D2...... (III)

Here, the diameter of the circle is D.

Write the expression for the perimeter of the circular channel.

  P=π2D...... (IV)

Substitute π8D2 for Ac and π2D for P in Equation (II).

  Rh=π8D2π2D=D4...... (V)

Write the expression for the flow depth of the circular channel.

  y=D2...... (VI)

Calculation:

Refer to table 13-1 "Mean values of the manning coefficient n for water flow in open channels" to obtain the manning coefficient as 0.016.

Substitute D4 for Rh, 1m1/3/s for a, 0.016 for n, π8D2 for Ac, 0.0015 for So and 10m3/s for Q in Equation (I).

  10m3/s=( 1 m 1/3 /s )0.016(π8D2)( D 4)2/3(0.0015)1/210m3/s=62.5m1/3/s(0.3926D2)(0.3967D 2/3 )(0.03872)10m3/s=(0.369 m 1/3 /s)D8/3D=3.446m

Substitute 3.446m for D in Equation (VI).

  y=3.446m2=1.732m

Conclusion:

The diameter of the circular channel is 3.446m.

The depth of the circular channel is 1.732m.

To determine

(b)

The dimension for the rectangular channel.

Expert Solution
Check Mark

Answer to Problem 50P

The dimension for the rectangular channel are-

The bottom breadth of the rectangular channel is 3.124m.

The depth of the rectangular channel is 1.562m.

Explanation of Solution

Given Information:

The water flow rate is 10m3/s and the bottom slope is 0.0015

Write the expression for the area of the rectangular channel.

  Ac=yb...... (VII)

Here, the depth of the rectangular is y and the bottom breath of the rectangular channel is b.

Write the expression for the flow depth of the rectangular channel.

  y=b2...... (VIII)

Substitute b2 for y in Equation (VII).

  Ac=b(b2)=b22...... (IX)

Write the expression for the perimeter of the rectangular channel.

  P=b+2y...... (X)

Substitute b2 for y in Equation (X).

  P=b+2(b2)=2b...... (XI)

Substitute b22 for Ac and 2b for P in Equation (II).

  Rh= b 2 22b=b4...... (XII)

Calculation:

Substitute b4 for Rh, 1m1/3/s for a, 0.016 for n, b22 for Ac, 0.0015 for So and 10m3/s for Q in Equation (I).

  10m3/s=( 1 m 1/3 /s )0.016( b 2 2)( b 4)2/3(0.0015)1/210m3/s=62.5m1/3/s(0.5b2)(0.3967b 2/3 )(0.03872)20.864=b8/3b=3.124m

Substitute 3.124m for b in Equation (VIII).

  y=3.124m2=1.562m

Conclusion:

The bottom breath of the rectangular channel is 3.124m.

The depth of the rectangular channel is 1.562m.

To determine

(c)

The dimension for the trapezoidal channel.

Expert Solution
Check Mark

Answer to Problem 50P

The bottom breath of the trapezoidal channel is 1.902m.

The depth of the trapezoidal channel is 1.647m.

Explanation of Solution

Given Information:

The water flow rate is 10m3/s and the bottom slope is 0.0015

Write the expression for the area of the trapezoidal channel.

  Ac=y(b+ytanθ)...... (XIII)

Here, the trapezoidal angle is θ, the depth of the trapezoidal is y and the bottom breath of the trapezoidal channel is b.

Write the expression for the flow depth of the trapezoidal channel.

  y=32b...... (XIV)

Write the expression for the inclined height of the trapezoidal section.

  c=ysinθ...... (XV)

Write the expression for the perimeter of the trapezoidal channel.

  P=b+2c...... (XVI)

Calculation:

Substitute 60° for θ and 32b for y in Equation (XV).

  c= 3 2bsin60°= 3 2b 3 2=b

Substitute 60° for θ and 32b for y in Equation (XIII).

  Ac=32b(b+ 3 2 b tan60°)=32b(b+ 3 2 b 3 )=334b2

Substitute b for c in Equation (XVI).

  P=b+2b=3b

Substitute 3b for P and 334b2 for

  Ac in Equation (II).

  Rh= 3 3 4b23b=34b

Substitute 34b for Rh, 1m1/3/s for a, 0.016 for n, 334b2 for Ac, 0.0015 for So and 10m3/s for Q in Equation (I).

  10m3/s=( 1 m 1/3 /s )0.016( 3 3 4b2)( 3 4b)2/3(0.0015)1/210m3/s=62.5m1/3/s(1.299b2)(0.5723b 2/3 )(0.03872)5.55=b8/3b=1.902m

Substitute 1.902m for b in Equation (XIV).

  y=32(1.902m)=0.8660(1.902m)=1.647m

Conclusion:

The bottom breath of the trapezoidal channel is 1.902m.

The depth of the trapezoidal channel is 1.647m.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
Water is to be transported in an unfinished-concrete rectangular channel with a bottom width of 4 ft at a rate of 51 ft3/s. The terrain is such that the channel bottom drops 2 ft per 1000 ft length. Determine the minimum height of the channel under uniform-flow conditions. What would your answer be if the bottom drop is just 1 ft per 1000 ft length?
Water is to be transported in a cast iron rectangular channel with a bottom width of 6 ft at a rate of 70 ft3/s. The terrain is such that the channel bottom drops 2.1 ft per 1000 ft length. Determine the minimum height of the channel under uniform-flow conditions
Water is flowing uniformly in a finished-concrete channel of trapezoidal cross section with a bottom width of 0.8 m, trapezoid angle of 50°, and a bottom angle of 0.4°. If the flow depth is measured to be 0.52 m, determine the flow rate of water through the channel.

Chapter 13 Solutions

Connect Access for Fluid Mechanics

Ch. 13 - Prob. 11CPCh. 13 - Water at 20°C flows in a partially full...Ch. 13 - Prob. 13PCh. 13 - Prob. 14PCh. 13 - Prob. 15PCh. 13 - Prob. 16PCh. 13 - Water at 10°C flows in a 3-rn-diameter circular...Ch. 13 - Prob. 18PCh. 13 - Prob. 19PCh. 13 - Prob. 20CPCh. 13 - Prob. 21CPCh. 13 - Prob. 22CPCh. 13 - Prob. 23CPCh. 13 - Prob. 24CPCh. 13 - Prob. 25CPCh. 13 - Consider steady supercritical flow of water...Ch. 13 - During steady and uniform flow through an open...Ch. 13 - How is the friction slope defined? Under what...Ch. 13 - Prob. 29PCh. 13 - Prob. 30EPCh. 13 - Prob. 31EPCh. 13 - Prob. 32PCh. 13 - Prob. 33PCh. 13 - Prob. 34PCh. 13 - Prob. 35PCh. 13 - Prob. 36PCh. 13 - Prob. 37PCh. 13 - Prob. 38CPCh. 13 - Which is the best hydraulic cross section for an...Ch. 13 - Prob. 40CPCh. 13 - Prob. 41CPCh. 13 - Prob. 42CPCh. 13 - Prob. 43CPCh. 13 - Prob. 44CPCh. 13 - Prob. 45PCh. 13 - A 3-ft-diameter semicircular channel made of...Ch. 13 - A trapezoidal channel with a bottom width of 6 m....Ch. 13 - Prob. 48PCh. 13 - Prob. 49PCh. 13 - Prob. 50PCh. 13 - Water is to be transported n a cast iron...Ch. 13 - Prob. 52PCh. 13 - Prob. 53PCh. 13 - Prob. 54PCh. 13 - Prob. 55PCh. 13 - Prob. 56PCh. 13 - Prob. 58EPCh. 13 - Prob. 59EPCh. 13 - Prob. 60PCh. 13 - Repeat Prob. 13-60 for a weedy excavated earth...Ch. 13 - Prob. 62PCh. 13 - During uniform flow n open channels, the flow...Ch. 13 - Prob. 64PCh. 13 - Is it possible for subcritical flow to undergo a...Ch. 13 - How does nonuniform or varied flow differ from...Ch. 13 - Prob. 67CPCh. 13 - Consider steady flow of water; an upward-sloped...Ch. 13 - How does gradually varied flow (GVF) differ from...Ch. 13 - Why is the hydraulic jump sometimes used to...Ch. 13 - Consider steady flow of water in a horizontal...Ch. 13 - Consider steady flow of water in a downward-sloped...Ch. 13 - Prob. 73CPCh. 13 - Prob. 74CPCh. 13 - Water is flowing in a 90° V-shaped cast iron...Ch. 13 - Prob. 76PCh. 13 - Consider the flow of water through a l2-ft-wde...Ch. 13 - Prob. 78PCh. 13 - Prob. 79PCh. 13 - Prob. 80PCh. 13 - Prob. 81EPCh. 13 - Water flowing in a wide horizontal channel at a...Ch. 13 - Water discharging into a 9-m-wide rectangular...Ch. 13 - During a hydraulic jump in a wide channel, the...Ch. 13 - Prob. 92PCh. 13 - Prob. 93CPCh. 13 - Prob. 94CPCh. 13 - Prob. 95CPCh. 13 - Prob. 96CPCh. 13 - Prob. 97CPCh. 13 - Prob. 98CPCh. 13 - Consider uniform water flow in a wide rectangular...Ch. 13 - Prob. 100PCh. 13 - Prob. 101PCh. 13 - Prob. 102EPCh. 13 - Prob. 103PCh. 13 - Prob. 104PCh. 13 - Prob. 105PCh. 13 - Prob. 106EPCh. 13 - Prob. 107EPCh. 13 - Prob. 108PCh. 13 - Prob. 109PCh. 13 - Prob. 111PCh. 13 - Repeat Prob. 13-111 for an upstream flow depth of...Ch. 13 - Prob. 113PCh. 13 - Prob. 114PCh. 13 - Repeat Prob. 13-114 for an upstream flow depth of...Ch. 13 - Prob. 116PCh. 13 - Prob. 117PCh. 13 - Prob. 118PCh. 13 - Prob. 119PCh. 13 - Water flows in a canal at an average velocity of 6...Ch. 13 - Prob. 122PCh. 13 - A trapczoda1 channel with brick lining has a...Ch. 13 - Prob. 124PCh. 13 - A rectangular channel with a bottom width of 7 m...Ch. 13 - Prob. 126PCh. 13 - Prob. 128PCh. 13 - Prob. 129PCh. 13 - Consider o identical channels, one rectangular of...Ch. 13 - The flow rate of water in a 6-m-ide rectangular...Ch. 13 - Prob. 132EPCh. 13 - Prob. 133EPCh. 13 - Consider two identical 15-ft-wide rectangular...Ch. 13 - Prob. 138PCh. 13 - Prob. 139PCh. 13 - A sluice gate with free outflow is used to control...Ch. 13 - Prob. 141PCh. 13 - Prob. 142PCh. 13 - Repeat Prob. 13-142 for a velocity of 3.2 ms after...Ch. 13 - Water is discharged from a 5-rn-deep lake into a...Ch. 13 - Prob. 145PCh. 13 - Prob. 146PCh. 13 - Prob. 147PCh. 13 - Prob. 148PCh. 13 - Prob. 149PCh. 13 - Prob. 150PCh. 13 - Prob. 151PCh. 13 - Prob. 152PCh. 13 - Water f1ows in a rectangular open channel of width...Ch. 13 - Prob. 154PCh. 13 - Prob. 155PCh. 13 - Prob. 156PCh. 13 - Prob. 157PCh. 13 - Prob. 158PCh. 13 - Prob. 159PCh. 13 - Prob. 160PCh. 13 - Prob. 161PCh. 13 - Prob. 162PCh. 13 - Prob. 163PCh. 13 - Prob. 164PCh. 13 - Prob. 165PCh. 13 - Consider water flow in the range of 10 to 15 m3/s...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Solids: Lesson 53 - Slope and Deflection of Beams Intro; Author: Jeff Hanson;https://www.youtube.com/watch?v=I7lTq68JRmY;License: Standard YouTube License, CC-BY