Fundamentals of Geotechnical Engineering (MindTap Course List)
Fundamentals of Geotechnical Engineering (MindTap Course List)
5th Edition
ISBN: 9781305635180
Author: Braja M. Das, Nagaratnam Sivakugan
Publisher: Cengage Learning
bartleby

Concept explainers

Question
Book Icon
Chapter 18, Problem 18.25P
To determine

Find the consolidation settlement of the group.

Expert Solution & Answer
Check Mark

Answer to Problem 18.25P

The consolidation settlement of the group is 225mm_.

Explanation of Solution

Given information:

The total load Qg on the group pile is 2,500 kN.

The length Lp1 of pile in layer 1 is 3.0 m.

The length Lp2 of pile in layer 2 is 3.0 m.

The length Lp3 of pile in layer 3 is 8 0 m.

The unit weight γ1 of the sand (layer 1) is 15kN/m3.

The saturated unit weight γsat(2) of the sand (layer 2) is 17kN/m3.

The initial void ratio e0 of the sand (layer 2) is 0.80.

The coefficient of consolidation Cc of the sand (layer 2) is 0.24.

The saturated unit weight γsat(3) of the normally consolidated clay (layer 3) is 19kN/m3.

The initial void ratio e0 of the normally consolidated clay (layer 3) is 0.85.

The coefficient of consolidation Cc of the normally consolidated clay (layer 3) is 0.30.

The saturated unit weight γsat(4) of the normally consolidated clay (layer 4) is 18kN/m3.

The initial void ratio e0 of the normally consolidated clay (layer 4) is 1.0.

The coefficient of consolidation Cc of the normally consolidated clay (layer 4) is 0.35.

The saturated unit weight γsat(5) of the normally consolidated clay (layer 5) is 20kN/m3.

The initial void ratio e0 of the normally consolidated clay (layer 5) is 0.7.

The coefficient of consolidation Cc of the normally consolidated clay (layer 5) is 0.26.

Calculation:

Show the pressure diagram as in Figure 1.

Fundamentals of Geotechnical Engineering (MindTap Course List), Chapter 18, Problem 18.25P

Determine the total length L of pile using the formula.

L=Lp1+Lp2+Lp3

Substitute 3 m for Lp1, 3.0 m for Lp2, and 8.0 m for Lp3.

L=3.0m+3.0m+8.0m=14m

The load starts transmitting to the soil at the pile depth of (2L3).

Determine the depth at which the load on the group pile Qg, is transmitted to soil.

Depth=23L

Here, L is the depth of normally consolidated clay layer 1.

Substitute 10 m for L.

Depth=23×10m=6.667m

Thus, the settlement starts in NCC layer 1.

Determine the stress σO(1) distribution in normally consolidated clay (NCC) layer 1 using the formula.

σO(1)=(γ1L1)+[(γsat(2)γw)L2]+[(γsat(3)γw)L3]

Here, L1 is the length of the pile in sand layer 1, γw is the unit weight of the water, L2 is the length of the pile in sand layer 2, and L3 is the length of the pile in sand layer 3.

Take the unit weight of water as 9.81kN/m3.

Substitute 15kN/m3 for γ1, 3.0 m for L1, 17kN/m3 for γsat(2), 9.81kN/m3 for γw, 3.0 m for L2, 19lb/ft3 for γsat(3), and 6.667 m for L3.

σO(1)=15×3+(179.81)×3.0+(199.81)(6.667)=127.84kN/m2

Determine the stress σO(2) distribution in normally consolidated clay (NCC) layer 2 using the formula.

σO(2)=σO(1)+[(γsat(3)γw)L4]+[(γsat(4)γw)(L42)]

Here, L4 is the length of the pile in NCC layer 4.

Substitute 127.84kN/m2 for σO(1), 3.333 m for L4, 19kN/m3 for γsat(4), 9.81kN/m3 for γw, and 18kN/m3 for γsat(3).

σO(2)=127.84+(199.81)×3.333+(189.81)(4.02)=127.84+47=174.84kN/m2

Determine the stress σO(3) distribution in normally consolidated clay (NCC) layer 3 using the formula.

σO(3)=σO(2)+[(γsat(3)γw)L42]+[(γsat(5)γw)(L52)]

Here, L5 is the length of the pile in NCC layer 4.

Substitute 174.85kN/m2 for σO(2), 4.0 m for L4, 18kN/m3 for γsat(5), 9.81kN/m3 for γw, 20kN/m3 for γsat(4), and 2.5 m for L5.

σO(3)=174.85+(189.81)×4.02+(209.81)2.52=203.96kN/m2

Calculate the stress Δσ(1) increase at the middle of NCC Layer 1 using the formula.

Δσ(1)=Qg(Bg+L4)2

Here, Qg is the total load on the group piles and Bg is the width of the plan of pile group.

Substitute 2,500 kN for Qg, 3.0 m for Bg, and 3.333 m for Lg.

Δσ(1)=2,500(3.0+3.333)2=62.33kN/m2

Calculate the stress Δσ(2) increase at the middle of NCC Layer 2 using the formula.

Δσ(2)=Qg(Bg+(L3+L42))2

Substitute 2,500 kN for Qg, 3.0 m for Bg, 6.667 for L3, and 4.0 m for L4.

Δσ(2)=2,500(3.0+(6.667+4.02))2=18.36kN/m2

Calculate the stress Δσ(5) increase at the middle of NCC Layer 3 using the formula.

Δσ(3)=Qg(Bg+L3+L4+L52)2

Substitute 2,500 kN for Qg, 3.0 m for Bg, 6.667 for L3, 4.0 m for L4, and 2.5 m for L5.

Δσ(3)=2,500(3.0+6.667+4.0+2.52)22,500(3.0+11.92)2=11.23kN/m2

Determine the value of (σO(1)+Δσ(1)).

Substitute 127.84kN/m2 for σO(1) and 62.33kN/m2 for Δσ(1).

σO(1)+Δσ(1)=127.84+62.33=190.17kN/m2

Determine the value of (σO(2)+Δσ(2)).

Substitute 174.84kN/m2 for σO(2) and 18.36kN/m2 for Δσ(2).

σO(2)+Δσ(2)=174.84+18.36=193.20kN/m2

Determine the value of (σO(3)+Δσ(3)).

Substitute 203.96kN/m2 for σO(3) and 11.23kN/m2 for Δσ(3).

σO(3)+Δσ(3)=203.96+11.23=215.19kN/m2

Determine the consolidated settlement ΔSc(1) of NCC layer 1 using the formula.

ΔSc(1)=[CcL11+e0]log(σO(1)+Δσ(1)σO(1))

Here, e0 is the initial void ratio in NCC layer 1.

Substitute 0.30 for Cc, 0.85 for e0, 6.667 m for L1, 190.17kN/m2 for (σO(1)+Δσ(1)), and 127.84kN/m2 for σO(1).

ΔSc(1)=[0.30×6.6671+0.85]×log(190.17127.84)=1.0811×log(1.48756)=0.186m

Determine the consolidated settlement ΔSc(2) of NCC layer 2 using the formula.

ΔSc(2)=[CcL21+e0]log(σO(2)+Δσ(2)σO(2))

Here, e0 is the initial void ratio in NCC layer 2.

Substitute 0.35 for Cc, 1 for e0, 4.0 m for L2, 193.20kN/m2 for (σO(2)+Δσ(2)), and 174.84kN/m2 for σO(2).

ΔSc(2)=[0.35×4.01+1]×log(193.20174.84)=0.7×log(1.105)=0.03m

Determine the consolidated settlement ΔSc(3) of NCC layer 3 using the formula.

ΔSc(3)=[CcL31+e]log(σO(3)+Δσ(3)σO(3))

Here, e0 is the initial void ratio in NCC layer 3.

Substitute 0.26 for Cc, 0.7 for e0, 2.5 m for L4, 215.19kN/m2 for (σO(3)+Δσ(3)), and 203.96kN/m2 for σO(3).

ΔSc(3)=[0.26×2.51+0.7]×log(215.19203.96)=0.382×log(1.055)=0.0089m

Determine the total ΔSc consolidated settlement of the group pile using the formula.

ΔSc=ΔSc(1)+ΔSc(2)+ΔSc(3)

Substitute 0.186 m for ΔSc(1), 0.03 m for ΔSc(2), and 0.0089 m for ΔSc(3).

ΔSc=0.186+0.03+0.0089=0.2249m×(1,000mm1m)=224.9mm225mm

Therefore, the consolidated settlement of the group pile is 225mm_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
For the (3×3) pile group shown in the figure,the settlement of the pile group,in a normally consolidated clay stratum having properties as shown in the figure,will be
In clay, pile cap and settlement of a pile group
A frictional pile with a circular cross-section (diameter = D) is pushed into the soil to a distance (L) and then it is subjected to an axial force (P) on its top end. Derive a formula to calculate the normal stress in any section x.
Knowledge Booster
Background pattern image
Civil Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Fundamentals of Geotechnical Engineering (MindTap...
Civil Engineering
ISBN:9781305635180
Author:Braja M. Das, Nagaratnam Sivakugan
Publisher:Cengage Learning
Text book image
Principles of Foundation Engineering (MindTap Cou...
Civil Engineering
ISBN:9781337705028
Author:Braja M. Das, Nagaratnam Sivakugan
Publisher:Cengage Learning
Text book image
Principles of Foundation Engineering (MindTap Cou...
Civil Engineering
ISBN:9781305081550
Author:Braja M. Das
Publisher:Cengage Learning
Text book image
Principles of Geotechnical Engineering (MindTap C...
Civil Engineering
ISBN:9781305970939
Author:Braja M. Das, Khaled Sobhan
Publisher:Cengage Learning