Concept explainers
Two lightbulbs have cylindrical filaments much greater in length than in diameter. The evacuated bulbs are identical except that one operates at a filament temperature of 2 100°C and the other operates at 2 000°C. (a) Find the ratio of the power emitted by the hotter lightbulb to that emitted by the cooler lightbulb. (b) With the bulbs operating at the same respective temperatures, the cooler lightbulb is to be altered by making its filament thicker so that it emits the same power as the hotter one. By what factor should the radius of this filament be increased?
Trending nowThis is a popular solution!
Chapter 19 Solutions
Bundle: Physics for Scientists and Engineers, Volume 2, Loose-leaf Version, 10th + WebAssign Printed Access Card for Serway/Jewett's Physics for Scientists and Engineers, 10th, Multi-Term
- An aluminum rod 0.500 m in length and with a cross-sectional area of 2.50 cm2 is inserted into a thermally insulated vessel containing liquid helium at 4.20 K. The rod is initially at 300 K. (a) If one-half of the rod is inserted into the helium, how many liters of helium boil off by the time the inserted half cools to 4.20 K? Assume the upper half does not yet cool. (b) If the circular surface of the upper end of the rod is maintained at 300 K, what is the approximate boil-off rate of liquid helium in liters per second after the lower half has reached 4.20 K? (Aluminum has thermal conductivity of 3 100 W/m K at 4.20 K; ignore its temperature variation. The density of liquid helium is 125 kg/m3.)arrow_forwardA 2.1-m-long, 0.2-cm-diameter electrical wire extends across a room that is maintained at 20°C. Heat is generated in the wire as a result of resistance heating, and the surface temperature of the wire is measured to be 180°C in steady operation. Also, the voltage drop and electric current through the wire are measured to be 110 V and 3 A, respectively. Disregarding any heat transfer by radiation, determine the convection heat transfer coefficient for heat transfer between the outer surface of the wire and the air in the room.arrow_forwardConsider steady heat transfer between two large parallel plates at constant temperatures of T1 = 290 K and T2 = 150 K that are L = 2 cm apart. Assuming the surfaces to be black (emissivity « = 1), determine the rate of heat transfer between the plates per unit surface area assuming the gap between the plates is (a) filled with atmospheric air, (b) evacuated, (c) filled with fiberglass insulation, and (d) filled with superinsulation having an apparent thermal conductivity of 0.00015 W/m·K.arrow_forward
- In the heating seasons the heat loss from a building (and thus the heating cost) is strongly dependent on the difference between the indoor and outdoor temperature. If the average outdoor temperature in a particular city during the heating season is 45 F (7 C), what is the effect on heating cost percentage-wise if the thermostat setting is fixed at 74 F (23.3 F) instead of 68 F (20 C)?arrow_forwardA brass rod of length 50 cm and diameter 3.0 mm is joined to a steel rod of the same length and diameter. What is the change in length of the combined rod at 250 °C, if the original lengths are at 40.0 °C? Is there a ‘thermal stress’ developed at the junction ? The ends of the rod are free to expand (Co-efficient of linear expansion of brass = 2.0×10-5 K-1 steel =1.2×10-5 K-1arrow_forwardConsider a flat-plate solar collector placed on the roof of a house. The temperatures at the inner and outer surfaces of the glass cover are measured to be 33°C and 31°C, respectively. The glass cover has a surface area of 2.5 m2, a thickness of 0.6 cm, and a thermal conductivity of 0.7 W/m·K. Heat is lost from the outer surface of the cover by convection and radiation with a convection heat transfer coefficient of 10 W/m2·K and an ambient temperature of 15°C. Determine the fraction of heat lost from the glass cover by radiation.arrow_forward
- Consider a 3-m-high rectangular enclosure consisting of two surfaces separated by a 0.1-m air gap at 1 atm. If the surface temperatures across the air gap are 30°C and –10°C, determine the ratio of the heat transfer rate for the horizontal orientation (with hotter surface at the bottom) to that for vertical orientation.arrow_forwardA copper telephone wire has essentially no sag between poles 35.0 m apart on a winter day when the temperature is 220.0 degrees C. How much longer is the wire on a summer day when the temperature is 35.0 degrees C?arrow_forwardAn aluminum wire is wrapped in rubber insulation. Both are subject to thermal expansion, with the following coefficients of linear expansion: alphaa=24· 10−6 1/C and alphar=8· 10−5 1/C . If the wire and insulation are the same length of 1.85m at a temperature of20.00°C, what is the difference in length (in MILLIMETERS) between the copper wire and the rubber insulation when heated up to a temperature of 189.00°C? Express a magnitude only (no negatives!). ______mm (MILLIMETERS!)arrow_forward
- A thin electronic component with a surface area of 950 cm2 is cooled by having a heat sink attached on its top surface. The thermal contact conductance of the interface between the electronic component and the heat sink is 25,000 W/m2∙K. According to the manufacturer, the heat sink has combined convection and radiation thermal resistance of 1.3 K/W. If the electronic component dissipates 45 W of heat through the heat sink in a surrounding temperature of 30°C, determine the temperature of the electronic component. Does the contact resistance at the interface of the electronic component and the heat sink play a significant role in the heat dissipation?arrow_forwardA 2-m * 1.5-m section of wall of an industrial furnaceburning natural gas is not insulated, and the temperatureat the outer surface of this section is measured to be 80°C.The temperature of the furnace room is 30°C, and the combinedconvection and radiation heat transfer coefficient at thesurface of the outer furnace is 10 W/m2·K. It is proposed toinsulate this section of the furnace wall with glass wool insulation(k = 0.038 W/m·K) in order to reduce the heat lossby 90 percent. Assuming the outer surface temperature ofthe metal section still remains at about 110°C, determine thethickness of the insulation that needs to be used.The furnace operates continuously and has an efficiency of78 percent. The price of the natural gas is $1.10/therm (1 therm =105,500 kJ of energy content). If the installation of the insulationwill cost $250 for materials and labor, determine how long it willtake for the insulation to pay for itself from the energy it saves.arrow_forwardWater enters a 2.5-cm-internal-diameter thin copper tube of a heat exchanger at 15°C at a rate of 0.3 kg/s, and is heated by steam condensing outside at 120°C. If the average heat transfer coefficient is 800 W/m2·°C, determine the length of the tube required in order to heat the water to 115°Carrow_forward
- Physics for Scientists and Engineers: Foundations...PhysicsISBN:9781133939146Author:Katz, Debora M.Publisher:Cengage LearningPrinciples of Physics: A Calculus-Based TextPhysicsISBN:9781133104261Author:Raymond A. Serway, John W. JewettPublisher:Cengage Learning