Bundle: Physics for Scientists and Engineers, Volume 2, Loose-leaf Version, 10th + WebAssign Printed Access Card for Serway/Jewett's Physics for Scientists and Engineers, 10th, Multi-Term
10th Edition
ISBN: 9781337888752
Author: Raymond A. Serway; John W. Jewett
Publisher: Cengage Learning
expand_more
expand_more
format_list_bulleted
Concept explainers
Question
Chapter 19, Problem 33AP
To determine
The specific heat of the liquid.
Expert Solution & Answer
Trending nowThis is a popular solution!
Students have asked these similar questions
A test is conducted to determine the overall heat transfer coefficient in a shell-and-tube oil-to-water heat exchanger that has 24 tubes of internal diameter 1.2 cm and length 2 m in a single shell. Cold water (cp = 4180 J/kg·K) enters the tubes at 20°C at a rate of 3 kg/s and leaves at 55°C. Oil (cp = 2150 J/kg·K) flows through the shell and is cooled from 120°C to 45°C. Determine the overall heat transfer coefficient Ui of this heat exchanger based on the inner surface area of the tubes.
A 1.0 m * 1.5 m double-pane window consists of two 4-mm-thick layers of glass (k = 0.78 W/m·K) that are separated by a 5-mm air gap (kair = 0.025 W/m·K). The heat flow through the air gap is assumed to be by conduction. The inside and outside air temperatures are 20°C and 220°C, respectively, and the inside and outside heat transfer coefficients are 40 and 20 W/m2·K. Determine (a) the daily rate of heat loss through the window in steady operation and (b) the temperature difference across the largest thermal resistance.
Steam in a heating system flows through tubes whose outer diameter is 3 cm and whose walls are maintained at a temperature of 120°C. Circular aluminum alloy fins (k = 180 W/m·K) of outer diameter 6 cm and constant thickness t = 2 mm are attached to the tube. The space between the fins is 3 mm, and thus there are 200 fins per meter length of the tube. Heat is transferred to the surrounding air at 25°C, with a combined heat transfer coefficient of 60 W/m2·K. Determine the increase in heat transfer from the tube per meter of its length as a result of adding fins.
Chapter 19 Solutions
Bundle: Physics for Scientists and Engineers, Volume 2, Loose-leaf Version, 10th + WebAssign Printed Access Card for Serway/Jewett's Physics for Scientists and Engineers, 10th, Multi-Term
Ch. 19.2 - Prob. 19.1QQCh. 19.3 - Suppose the same process of adding energy to the...Ch. 19.5 - Prob. 19.3QQCh. 19.5 - Characterize the paths in Figure 19.12 as...Ch. 19.6 - Prob. 19.5QQCh. 19 - Prob. 1PCh. 19 - The highest waterfall in the world is the Salto...Ch. 19 - Prob. 3PCh. 19 - The temperature of a silver bar rises by 10.0C...Ch. 19 - You are working in your kitchen preparing lunch...
Ch. 19 - If water with a mass mk at temperature Tk is...Ch. 19 - An aluminum calorimeter with a mass of 100 g...Ch. 19 - An electric drill with a steel drill bit of mass m...Ch. 19 - A 3.00-g copper coin at 25.0C drops 50.0 m to the...Ch. 19 - How much energy is required to change a 40.0-g ice...Ch. 19 - Prob. 11PCh. 19 - A 3.00-g lead bullet at 30.0C is fired at a speed...Ch. 19 - In an insulated vessel, 250 g of ice at 0C is...Ch. 19 - Prob. 14PCh. 19 - One mole of an ideal gas is warmed slowly so that...Ch. 19 - (a) Determine the work done on a gas that expands...Ch. 19 - A thermodynamic system undergoes a process in...Ch. 19 - Why is the following situation impossible? An...Ch. 19 - A 2.00-mol sample of helium gas initially at 300...Ch. 19 - (a) How much work is done on the steam when 1.00...Ch. 19 - A 1.00-kg block of aluminum is warmed at...Ch. 19 - In Figure P19.22, the change in internal energy of...Ch. 19 - A student is trying to decide what to wear. His...Ch. 19 - A concrete slab is 12.0 cm thick and has an area...Ch. 19 - Two lightbulbs have cylindrical filaments much...Ch. 19 - Prob. 26PCh. 19 - (a) Calculate the R-value of a thermal window made...Ch. 19 - Prob. 28PCh. 19 - Gas in a container is at a pressure of 1.50 atm...Ch. 19 - Prob. 30APCh. 19 - You have a particular interest in automobile...Ch. 19 - You are working in a condensed-matter laboratory...Ch. 19 - Prob. 33APCh. 19 - Prob. 34APCh. 19 - Prob. 35APCh. 19 - Prob. 36APCh. 19 - An ice-cube tray is filled with 75.0 g of water....Ch. 19 - Prob. 38APCh. 19 - An iron plate is held against an iron wheel so...Ch. 19 - One mole of an ideal gas is contained in a...Ch. 19 - Prob. 41APCh. 19 - Prob. 42APCh. 19 - Prob. 43APCh. 19 - A student measures the following data in a...Ch. 19 - (a) The inside of a hollow cylinder is maintained...Ch. 19 - A spherical shell has inner radius 3.00 cm and...Ch. 19 - Prob. 47CP
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.Similar questions
- An aluminum rod 0.500 m in length and with a cross-sectional area of 2.50 cm2 is inserted into a thermally insulated vessel containing liquid helium at 4.20 K. The rod is initially at 300 K. (a) If one-half of the rod is inserted into the helium, how many liters of helium boil off by the time the inserted half cools to 4.20 K? Assume the upper half does not yet cool. (b) If the circular surface of the upper end of the rod is maintained at 300 K, what is the approximate boil-off rate of liquid helium in liters per second after the lower half has reached 4.20 K? (Aluminum has thermal conductivity of 3 100 W/m K at 4.20 K; ignore its temperature variation. The density of liquid helium is 125 kg/m3.)arrow_forwardThe tube in a heat exchanger has a 2-in inner diameter and a 3-in outer diameter. The thermal conductivity of the tube material is 0.5 Btu/h·ft·°F, while the inner surface heat transfer coefficient is 50 Btu/h·ft2·°F and the outer surface heat transfer coefficient is 10 Btu/h·ft2·°F. Determine the overall heat transfer coefficients based on the outer and inner surfaces.arrow_forwardCold water (cp = 4180 J/kg·K) enters the tubes of a heat exchanger with 2-shell passes and 20-tube passes at 20°C at a rate of 3 kg/s, while hot oil (cp = 2200 J/kg·K) enters the shell at 130°C at the same mass flow rate and leaves at 60°C. If the overall heat transfer coefficient based on the outer surface of the tube is 220 W/m2·K, determine (a) the rate of heat transfer and (b) the heat transfer surface area on the outer side of the tube.arrow_forward
- A one-shell and two-tube type heat exchanger has an overall heat transfer coefficient of 300 Btu/h·ft2·°F. The shell side fluid has a heat capacity rate of 20,000 Btu/h·°F, while the tube side fluid has a heat capacity rate of 40,000 Btu/h·°F. The inlet temperatures on the shell side and tube side are 200°F and 90°F, respectively. If the total heat transfer area is 100 ft2, determine (a) the heat transfer effectiveness and (b) the actual heat transfer rate in the heat exchanger.arrow_forwardpicture window has dimensions of 1.65 m by 2.2 m and is made of glass 7.5 mm thick. On a winter day, the outside temperature is 24° C while the inside temperature is a comfortable at 17.5° C. (k of glass =0.145W/m.K) ((a*1.5)+(b*1.5)+(c*2.0) Calculate the following:a) the area of the window in square metres b) the temperature gradient (ΔT/Δx)in kelvin/metre c) the rate of heat lost through the window by conduction in watts/metre.kelvinarrow_forwardTwo 5-cm-diameter, 15-cm-long aluminum bars (k = 176 W/m·K) with ground surfaces are pressed against each other with a pressure of 20 atm. The bars are enclosed in an insulation sleeve and, thus, heat transfer from the lateral surfaces is negligible. If the top and bottom surfaces of the two-bar system are maintained at temperatures of 150°C and 20°C, respectively, determine (a) the rate of heat transfer along the cylinders under steady conditions and (b) the temperature drop at the interface.arrow_forward
- In an experiment to determine the thermal conductivity of a new metal alloy, a bar of the metal is completely surrounded by insulation and exposed to 707 W of constant heat energy at one end. The bar has a radius of 0.074 m and a length of 0.331 m. The entire set-up is place in a cold room and once the system has reached steady state conditions, the temperature at the hot end is measured to be 63.8°C and the temperature at the cold end is measured to be 14.9°C. What is the thermal conductivity (in W/m∙K) of the metal alloy [round your final answer to zero decimal places]? Another metal alloy was tested using the same set-up (same size and heat input) as question above. If the temperature difference between the hot end and the cold end for this test was found to be 30°C, it would indicate that this material is a better conductor of heat than the material tested in question above.arrow_forwardThe exhaust duct from a heater has an inside diameter of 114.3 mm with ceramic walls 6.4 mm thick. The average k = 1.52 W/mK. Outside this wall, an insulation of rock wool 102 mm thick is installed. The thermal conductivity of the rock wool is k = 0.046+1.56*10-4T (°C) (W/mK). The inside surface temperature of the ceramic is T1= 588.7 K, and the outside surface temperature of the insulation is T3= 311 K. Calculate the heat loss for 1.5 m of duct and the interface temperature T2between the ceramic and the insulation.Assumesteady heat transfer.Hint: The correct value of km for insulation is that evaluated at the mean temperature of T2+T3/2. Hence, for the first trial assume a mean temperature of, say, 448 K. Then, calculate the heat loss and T2. Using this new T2, calculate a new mean temperature and proceed as before.arrow_forwardOne gram of water (1 cm3) becomes 875 cm3 of steam when boiled at a constant pressure of 1 atm (1.013 x 105 Pa). The heat of vaporization at this pressure is Lv = 2.256 x 106 J/kg. Compute a) the heat absorbed by the water b) the work done by the water when it vaporizes and c) its increase in internal energy.arrow_forward
- The outer diameter of a glass jar and the inner diameter of its iron lid are both 760 mm at room temperature (20.0 ∘C). a)What will be the size of the mismatch between the lid and the jar if the lid is briefly held under hot water until its temperature rises to 57.5 ∘C, without changing the temperature of the glass? Use the coefficient of linear expansion for iron α=1.2×10−5K−1.arrow_forwardA 5-mm-thick stainless steel strip (k = 21 W/m·K, r = 8000 kg/m3, and cp = 570 J/kg·K) is being heat treated as it moves through a furnace at a speed of 1 cm/s. The air temperature in the furnace is maintained at 900°C with a convection heat transfer coefficient of 80 W/m2·K. If the furnace length is 3 m and the stainless steel strip enters it at 20°C, determine the temperature of the strip as it exits the furnace.arrow_forward
arrow_back_ios
arrow_forward_ios
Recommended textbooks for you
Principles of Physics: A Calculus-Based TextPhysicsISBN:9781133104261Author:Raymond A. Serway, John W. JewettPublisher:Cengage Learning
Physics for Scientists and Engineers: Foundations...PhysicsISBN:9781133939146Author:Katz, Debora M.Publisher:Cengage Learning
Principles of Physics: A Calculus-Based Text
Physics
ISBN:9781133104261
Author:Raymond A. Serway, John W. Jewett
Publisher:Cengage Learning
Physics for Scientists and Engineers: Foundations...
Physics
ISBN:9781133939146
Author:Katz, Debora M.
Publisher:Cengage Learning