Fundamentals of Applied Electromagnetics (7th Edition)
7th Edition
ISBN: 9780133356816
Author: Fawwaz T. Ulaby, Umberto Ravaioli
Publisher: PEARSON
expand_more
expand_more
format_list_bulleted
Concept explainers
Textbook Question
Chapter 2, Problem 46P
An antenna with a load impedance
is connected to a transmitter through a 50 Ω lossless transmission line. If under matched conditions (50 Ω load) the transmitter can deliver 20 W to the load, how much power can it deliver to the antenna? Assume that Zg = Z0.
Expert Solution & Answer
Want to see the full answer?
Check out a sample textbook solutionStudents have asked these similar questions
A transmitter delivers 50 W into a 600 Ω lossless line that is terminated with an antenna that has an impedance of 275 Ω, resistive.
(a) What is the coefficient of reflection?
(b) How much of the power actually reaches the antenna?
For an antenna system, the transmitted and the received powers are 50 W and 25 W respectively. Calculate the path loss in dB. Assume far field condition.
The height of base station is 200 meter and operated at 2600MHz. The gain of the base station antenna (transmitter) and the receiving antenna (mobile phone) are 20 dB and 6 dB, respectively. The distance between base station and mobile phone is 2 km.
a) Find the free space transmission loss.
b) Find the power received when the transmitted power is 60 W.
Chapter 2 Solutions
Fundamentals of Applied Electromagnetics (7th Edition)
Ch. 2.2 - What is a transmission line? When should...Ch. 2.2 - Prob. 2CQCh. 2.2 - What constitutes a TEM transmission line?Ch. 2.2 - Prob. 4CQCh. 2.2 - Prob. 1ECh. 2.2 - Calculate the transmission line parameters at 1...Ch. 2.4 - Verify that Eq. (2.26a) indeed provides a solution...Ch. 2.4 - A two-wire air line has the following line...Ch. 2.6 - The attenuation constant represents ohmic losses....Ch. 2.6 - How is the wavelength of the wave traveling on...
Ch. 2.6 - Prob. 7CQCh. 2.6 - What is a standing-wave pattern? Why is its period...Ch. 2.6 - Prob. 9CQCh. 2.6 - For a lossless transmission line, = 20.7 cm at 1...Ch. 2.6 - A lossless transmission line uses a dielectric...Ch. 2.6 - Prob. 7ECh. 2.6 - Prob. 8ECh. 2.6 - Prob. 10ECh. 2.6 - A 140 lossless line is terminated in a load...Ch. 2.8 - What is the difference between the characteristic...Ch. 2.8 - What is a quarter-wave transformer? How can it be...Ch. 2.8 - Prob. 12CQCh. 2.8 - Prob. 13CQCh. 2.8 - if the input impedance of a lossless line is...Ch. 2.8 - Prob. 12ECh. 2.8 - A 300 feedline is to be connected to a 3 m long,...Ch. 2.9 - According to Eq. (2.102b), the instantaneous value...Ch. 2.9 - Prob. 16CQCh. 2.9 - What fraction of the incident power is delivered...Ch. 2.9 - Prob. 18CQCh. 2.9 - For a 50 lossless transmission line terminated in...Ch. 2.9 - For the line of Exercise 2-14, what is the...Ch. 2.10 - The outer perimeter of the Smith chart represents...Ch. 2.10 - What is an SWR circle? What quantities are...Ch. 2.10 - What line length corresponds to one complete...Ch. 2.10 - Which points on the SWR circle correspond to...Ch. 2.10 - Prob. 23CQCh. 2.10 - Use the Smith chart to find the values of ...Ch. 2.11 - Prob. 24CQCh. 2.11 - Prob. 25CQCh. 2.12 - What is transient analysis used for?Ch. 2.12 - Prob. 28CQCh. 2.12 - What is the difference between the bounce diagram...Ch. 2 - A transmission line of length l connects a load to...Ch. 2 - Show that the transmission-line model shown in...Ch. 2 - A 1 GHz parallel-plate transmission line consists...Ch. 2 - For the parallel-plate transmission line of...Ch. 2 - In addition to not dissipating power, a lossless...Ch. 2 - For a distortionless line [see Problem 2.13] with...Ch. 2 - Prob. 15PCh. 2 - A transmission line operating at 125 MHz has Z0 =...Ch. 2 - Prob. 17PCh. 2 - Polyethylene with r=2.25 is used as the insulating...Ch. 2 - Prob. 20PCh. 2 - Prob. 21PCh. 2 - Prob. 22PCh. 2 - Prob. 23PCh. 2 - A 50 lossless line terminated in a purely...Ch. 2 - Prob. 26PCh. 2 - Prob. 27PCh. 2 - Prob. 29PCh. 2 - Prob. 30PCh. 2 - Two half-wave dipole antennas, each with an...Ch. 2 - Prob. 34PCh. 2 - For the lossless transmission line circuit shown...Ch. 2 - A lossless transmission line is terminated in a...Ch. 2 - The input impedance of a 31 cm long lossless...Ch. 2 - FM broadcast station uses a 300 transmission line...Ch. 2 - A generator with Vg=300 V and Zg = 50 is...Ch. 2 - If the two-antenna configuration shown in Fig....Ch. 2 - For the circuit shown in Fig. P2.44, calculate the...Ch. 2 - The circuit shown in Fig. P2.45 consists of a 100 ...Ch. 2 - An antenna with a load impedance ZL=(75+j25) is...Ch. 2 - Prob. 47PCh. 2 - Use the Smith chart to determine the input...Ch. 2 - Prob. 52PCh. 2 - A lossless 50 transmission line is terminated in...Ch. 2 - A lossless 50 transmission line is terminated in...Ch. 2 - Use the Smith chart to find yL if zL = 1.5 j0.7.Ch. 2 - Prob. 59PCh. 2 - Prob. 62PCh. 2 - Determine Zin of the feed line shown in Fig....Ch. 2 - Prob. 73PCh. 2 - A 25 antenna is connected to a 75 lossless...Ch. 2 - Prob. 75PCh. 2 - Prob. 76PCh. 2 - Prob. 77PCh. 2 - In response to a step voltage, the voltage...Ch. 2 - Suppose the voltage waveform shown in Fig. P2.77...Ch. 2 - For the circuit of Problem 2.80, generate a bounce...Ch. 2 - In response to a step voltage, the voltage...
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.Similar questions
- a) A 50 cm length 50 ohms coaxial cable is terminated with an antenna having an impedance of 100 + j150 ohms to be operated at 3.5 GHz. The cable is made with inner and outer conductor and dielectric (relative permittivity = 2.56) in between the two conductors. (i) Determine the load reflection coefficient. (ii) Find the standing wave ratio (SWR). (iii) Determine the input impedance of the line. (iv) What can you do to reduce the load reflection coefficient? The antenna in Q.(a) is to be matched to the said 50 Ω coaxial line using single series stub tuner. You are requested to find two solutions using open circuited stub using Smith Chart. (i) Determine the normalized load impedance and plot on the Smith Chart? (ii) Find the two possible distance of the stub from the load. (iii) Find the two possible length of the stub. (iv) Sketch the circuitsarrow_forwardThe following lossless network is powered by a f=9 GHz microwave source. A matching circuit is designed for ZL=91 load and ZS. Since it is known that L=631,30220884613 pH here, what is ZS? π=3.1416arrow_forwardHow do I find the input impedance of a 60 ohm transmission line that is a quarter wavelength long if its terminated by i) a short circuit and ii) 1 - 2j ?arrow_forward
- 5 (a) With an aid of a simple diagram explain the construction of a coaxial cable (b) If a load of 50 Ohms terminates a transmission line of impedance 100 Ohms calculate the reflectance and the amplitude of the reflected wave (given a unit amplitude incident wave). Also find the VSWR in this case (c) A 50Ω transmission line is connected to an antenna with load impedance of ZL = (25-j50) Ω. Design a short-circuited parallel stub required to match the lines. (Use a smith chart and upload it along with your answers)arrow_forwardQI/ A lossless coaxial cable of 170 mm long has the parameters L — 245 nWm andC — 200 pF/m. The operating frequency is f —I GHz and the line is terminated by ZL —100 Q, determine:A) The characteristic impedance.B) The input impedance at the input terminals of the line.C) The standing wave ratio on the line.arrow_forwardA satellite in synchronous orbit is used to communicate with an earth station at a distance of 7.6 ×10^7 m. The satellite has an antenna with a gain of 15 dB and a transmitter power of 3 W. The earth station uses an antenna with gain 50 dB. The frequency band is at f = 9.8 GHz. What is the free space path loss in dB? Also, determine the received power level at the output of the receiver antenna in dBW.arrow_forward
- The transmit power is 20 dB, the transmit antenna gain is 2 (in linear scale), the receiveantenna gain is 3 (in linear scale), the carrier frequency is 300 kHz, the transmit antenna heightis 10 meters, the receive antenna height is 1 meter, the distance between the transmitter andreceiver is 1 km, L = 1. The transmission environment is air (the path loss exponent is 2). Usethe free space propagation model.a. Calculate the receive power in dBm.b. Calculate the path loss in dB.arrow_forwardThe magnitude of the phasor voltage on a lossless air transmission line connecting a transmitter to a reci=eiver is shown below. The transmission line impedance is 50 ohms. The sinusoidal generator operates at a frequency of 3 GHz. The load is at position z = 0. The first minima at point A (|V|_min = 0V) occurs at d = 1.25 cm from the load towards the generator. a. What is the Voltage Standing Wave Ratio (VSWR) of this line? What is the reflection coeddicient a the load in phasor format (magnitude and phase)? b. What is the physical distance from point C to D in meters? c. What is the magnitude of the reflection coefficient |Γ (at C)| at point C? d. What is the wave impedance (resistance and reactance) and the reflection coefficient (phase and magnitude) at point C.arrow_forwardA lossless transmission line is 50 cm in length and operates at a frequency of 100 MHz. The line parameters are L = 0.2μH/m and C = 80 pF/m. The line is terminated by a load ZL = 50 + j20 Ω. Determine the: (a) reflection coefficient ; (b) SWR ; (c) the input impedance of the line. (d) What average power is delivered to ZL if the input voltage is 100 V?arrow_forward
- 2.) The power density is 4 mW/m² at some distance R from an isotropic antenna. The isotropic antenna is replaced with a different antenna and the power density measured is now 60 mW/m² at the same distance R. What is the gain (in dB) of the second antenna? 3.) The received power at an airplane is calculated as Pr=-43 dBm at a range of 13 miles using free-space propagation. Determine the received power (in dBm) at a range of 52 miles.arrow_forwardA transmitter is required to deliver 100 W to an antenna through 45 m of coaxial cable with a loss of 4 dB/100 m. What must be the output power in watts of the transmitter, assuming the line is matched?arrow_forwardA satellite transmitter operates at 4 GHz with an antenna gain of 40 dBi. The receiver 40,000 km away has a gain of 50 dBi. If the transmitter has a power 8 W, ignoring feedline losses and mismatch, find (a) the EIRP in dBW (b) the free space path loss, (c) the power delivered to the receiver in W and dBmarrow_forward
arrow_back_ios
SEE MORE QUESTIONS
arrow_forward_ios
Recommended textbooks for you
- Introductory Circuit Analysis (13th Edition)Electrical EngineeringISBN:9780133923605Author:Robert L. BoylestadPublisher:PEARSONDelmar's Standard Textbook Of ElectricityElectrical EngineeringISBN:9781337900348Author:Stephen L. HermanPublisher:Cengage LearningProgrammable Logic ControllersElectrical EngineeringISBN:9780073373843Author:Frank D. PetruzellaPublisher:McGraw-Hill Education
- Fundamentals of Electric CircuitsElectrical EngineeringISBN:9780078028229Author:Charles K Alexander, Matthew SadikuPublisher:McGraw-Hill EducationElectric Circuits. (11th Edition)Electrical EngineeringISBN:9780134746968Author:James W. Nilsson, Susan RiedelPublisher:PEARSONEngineering ElectromagneticsElectrical EngineeringISBN:9780078028151Author:Hayt, William H. (william Hart), Jr, BUCK, John A.Publisher:Mcgraw-hill Education,
Introductory Circuit Analysis (13th Edition)
Electrical Engineering
ISBN:9780133923605
Author:Robert L. Boylestad
Publisher:PEARSON
Delmar's Standard Textbook Of Electricity
Electrical Engineering
ISBN:9781337900348
Author:Stephen L. Herman
Publisher:Cengage Learning
Programmable Logic Controllers
Electrical Engineering
ISBN:9780073373843
Author:Frank D. Petruzella
Publisher:McGraw-Hill Education
Fundamentals of Electric Circuits
Electrical Engineering
ISBN:9780078028229
Author:Charles K Alexander, Matthew Sadiku
Publisher:McGraw-Hill Education
Electric Circuits. (11th Edition)
Electrical Engineering
ISBN:9780134746968
Author:James W. Nilsson, Susan Riedel
Publisher:PEARSON
Engineering Electromagnetics
Electrical Engineering
ISBN:9780078028151
Author:Hayt, William H. (william Hart), Jr, BUCK, John A.
Publisher:Mcgraw-hill Education,
How does an Antenna work? | ICT #4; Author: Lesics;https://www.youtube.com/watch?v=ZaXm6wau-jc;License: Standard Youtube License