The steam requirements of a manufacturing facility are being met by a boiler whose rated heat input is 5.5 × 106 Btu/h. The combustion efficiency of the boiler is measured to be 0.7 by a handheld flue gas analyzer. After tuning up the boiler, the combustion efficiency rises to 0.8. The boiler operates 4200 h a year intermittently. Taking the unit cost of energy to be $13/106 Btu, determine the annual energy and cost savings as a result of tuning up the boiler.
The annual energy and cost savings.
Answer to Problem 56P
The annual energy and cost savings are
Explanation of Solution
Calculate the heat output of boiler.
Here, heat input of boiler is
Re-write Equation (I) if the current rate of heat input to the boiler is
Write the equation for the rate of useful heat output of the boiler.
Write the rate of heat input to the boiler after the tune up.
Write the rate of energy savings.
Calculate the energy savings.
Here, the operational hours is t.
Calculate the cost savings.
Conclusion:
Substitute
Substitute
Substitute
Substitute 4200 h/yr for t and
Substitute
Thus, the annual energy and cost savings are
Want to see more full solutions like this?
Chapter 2 Solutions
Thermodynamics: An Engineering Approach
Additional Engineering Textbook Solutions
Vector Mechanics for Engineers: Statics
Manufacturing Engineering & Technology
Vector Mechanics For Engineers
Thinking Like an Engineer: An Active Learning Approach (3rd Edition)
Statics and Mechanics of Materials
Vector Mechanics for Engineers: Statics and Dynamics
- Solar energy stored in large bodies of water, called solar ponds, is being used to generate electricity. If such a solar power plant has an efficiency of 3 percent and a net power output of 180 kW, determine the average value of the reuired solar energy collection rate, in Btu/h.arrow_forwardHow is electricity generated from wind? (How do wind turbines work?)arrow_forward1)Can the combined turbine-generator efficiency be greater than either the turbine efficiency or the generator efficiency? Explain 2) On a hot summer day, a student turns his fan on when he leaves his room in the morning. When he returns in the evening, will the room be warmer or cooler than the neighboring rooms? Why? Assume all the doors and windows are kept closed. 3) Water is being heated in a closed pan on top of a range while being stirred by a paddle wheel. During the process, 30 kJ of heat is transferred to the water, and 5 kJ of heat is lost to the surrounding air. The paddle-wheel work amounts to 500 N · m. Determine the final energy of the system if its initial energy is 10 kJ. 4) Consider a hooded electric open burner in an area where the unit costs of electricity and natural gas are $0.07/kWh and $1.20/therm, respectively (Noting that 1 therm = 29.3 kWh) . The efficiency of open burners can be taken to be 73 percent for electric burners and 38 percent for gas burners.…arrow_forward
- Can the combined turbine–generator efficiency be greater than either the turbine efficiency or the generator efficiency? Explain.arrow_forwardThe demand for electric power is usually much higher during the day than it is at night, and utility companies often sell power at night at much lower prices to encourage consumers to use the available power generation capacity and to avoid building new expensive power plants that will be used only a short time during peak periods. Utilities are also willing to purchase power produced during the day from private parties at a high price. Suppose a utility company is selling electric power for $0.06/kWh at night and is willing to pay $0.13/kWh for power produced during the day. To take advantage of this opportunity, an entrepreneur is considering building a large reservoir 50 m above the lake level, pumping water from the lake to the reservoir at night using cheap power, and letting the water flow from the reservoir back to the lake during the day, producing power as the pump–motor operates as a turbine–generator during reverse flow. Preliminary analysis shows that a water flow rate of 2…arrow_forwardA 90-hp (shaft output) electric car is powered by an electric motor mounted in the engine compartment. If the motor has an average efficiency of 91 percent, determine the rate of heat supply by the motor to the engine compartment at full load.arrow_forward
- An exercise room has 6 weight-lifting machines that have no motors and 7 treadmills each equipped with a 2.5-hp (shaft output) motor. The motors operate at an average load factor of 0.7, at which their efficiency is 0.77. During peak evening hours, all 12 pieces of exercising equipment are used continuously, and there are also two people doing light exercises while waiting in line for one piece of the equipment. Assuming the average rate of heat dissipation from people in an exercise room is 600 W, determine the rate of heat gain of the exercise room from people and the equipment at peak load conditions.arrow_forwardWhy is it important to clean the condenser coils of a household refrigerator a few times a year? Also, why is it important not to block airflow through the condenser coils?arrow_forwardThe kitchen, bath, and other ventilation fans in a house should be used sparingly since these fans can discharge a houseful of warmed or cooled air in just one hour. Consider a 200-m2 house whose ceiling height is 2.8 m. The house is heated by a 96 percent efficient gas heater and is maintained at 22°C and 92 kPa. If the unit cost of natural gas is $1.20/therm (1 therm = 105,500 kJ), determine the cost of energy “vented out” by the fans in 1 h. Assume the average outdoor temperature during the heating season to be 5°C.arrow_forward
- For a geothermal power plant, the underground hot water thetemperature of 80oC is the source, and the ambient atmospheric air is30oC. Determine the maximum possible thermal efficiency of the powerplant, and the maximum power output if the rate at which energy issupplied is 1 kJ/s.arrow_forwardA steam power plant receives heat from a furnace at a rate of 280 GJ/h. Heat losses to the surrounding air from the steam as it passes through the pipes and other components are estimated to be about 8 GJ/h. If the waste heat is transferred to the cooling water at a rate of 165 GJ/h, determine the thermal efficiency of this power plant.arrow_forwardShow that the power produced by a wind turbine is proportional to the cube of the wind velocity and to the square of the blade span diameter.arrow_forward
- Elements Of ElectromagneticsMechanical EngineeringISBN:9780190698614Author:Sadiku, Matthew N. O.Publisher:Oxford University PressMechanics of Materials (10th Edition)Mechanical EngineeringISBN:9780134319650Author:Russell C. HibbelerPublisher:PEARSONThermodynamics: An Engineering ApproachMechanical EngineeringISBN:9781259822674Author:Yunus A. Cengel Dr., Michael A. BolesPublisher:McGraw-Hill Education
- Control Systems EngineeringMechanical EngineeringISBN:9781118170519Author:Norman S. NisePublisher:WILEYMechanics of Materials (MindTap Course List)Mechanical EngineeringISBN:9781337093347Author:Barry J. Goodno, James M. GerePublisher:Cengage LearningEngineering Mechanics: StaticsMechanical EngineeringISBN:9781118807330Author:James L. Meriam, L. G. Kraige, J. N. BoltonPublisher:WILEY