The advantages and disadvantages of machine vision when compared with other forms of detection.
Explanation of Solution
Machine vision helps in detecting traffic in many locations within the camera's field of view. The locations to be checked are selected by the user through interactive graphics. A detection signal is generated every time a vehicle passes over the detector lines, showing the presence of the vehicle.
The autoscope(wireless detector) with one or more cameras helps in replacing many loops by giving a wide zone detection system.
The device is easily installed without disturbing traffic operations, as compared to loop installation, and the detection configuration is varied either manually or by using a software containing a function of the traffic conditions.
The device is also proficient in obtaining traffic parameters, such as volume and queue lengths.
The disadvantage lies in the positioning of cameras, otherwise, it will lead to missed detections of vehicles since the truck would obstruct them from the camera's field of view.
Machine vision is not suitable in fog-prone areas as fog create complications with video detection.
Conclusion:
Machine vision is also known as Video image processing or Video detection system.
Want to see more full solutions like this?
Chapter 4 Solutions
Traffic And Highway Engineering
- QUESTION 3 To measure the stopping sight distance, what is the height (ft) of the driver's eye?arrow_forwardand report the A driver with 20/20 vision can read a given sign at a distance of 100 ft from the sign. At what distance would another driver read the same sign with 20/30 vision ● 20/40 vision 20/X vision (Give your answer with respect to X)arrow_forwardRemote sensing 1) List the steps of image processing? 2) If we are able to see beyond the visible spectrum and towards the infrared side of spectrum, what would we see more and why?arrow_forward
- in this phase, the driver acquires sufficient information concerning the object or condition Decision phase Identification phase Detection phase Oarrow_forwardA photograph is to be obtained at a scale of 1:12,500 by aerial photogrammetry. If the focal length of the camera to be used is 7.0 in., determine the height (in ft) at which the aircraft should be flown if the average elevation of the terrain is 860 ft. 7410 Your response is within 10% of the correct value. This may be due to roundoff error, or you could have a mistake in your calculation. Carry out all intermediate results to at least four-digit accuracy to minimize roundoff error, ft Need Help? Read Itarrow_forwardQUESTION 3 Fill in the following blanks for different signal components: • The collection of multiple signal sections serving a particular movement is called signal • Signal • Signal ● Signal is used to restrict the signal indication to one lane only and not other lanes. houses all parts of a signal (lens, light, etc.) changes the colors indicated by signal lamps according to a fixed or variable plan.arrow_forward
- When does measurement error occurarrow_forward6) A person is looking to a minaret which is touching the horizon when his sighting height is 1.60 m and he can see the mid of the minaret if his sighting height is 5.75 m. What is the distance from this person to the minaret?arrow_forwardDuring formative evaluation, the human factors team collected some reaction time data in anticipation that location and size of buttons likely change in the final user interface for operating the autonomous system for self- driving cars. The team is fixed on using the letter-sized (8.5x11") touch screen given various cost and space constraints. During the formative evaluation, the team discovered that the minimum time is 100ms for the easiest task of hitting a target. The design needs to optimize the placement of two identically sized, circular buttons - "confirm" autonomous driving setting and "engage" autonomous driving. The two buttons should not be closer than two inches to avoid confusability (i.e., accidentally pressing the wrong button). However, the placement and size should facilitate quick change in controls, specifically no more than 500ms. Their current design for the two circular buttons is half-inch diameter and separated by four inches from center to center. However,…arrow_forward
- An offshore drilling rig is being towed out to sea. What is the maximum distance awaythat the navigation lights can still be seen by an observer standing at the shoreline?The observer’s eye height is 5'8", and the uppermost navigation light is 230 ft abovethe water.arrow_forward1. The license plates of motor vehicles having letters 3 inches high can be read by a person with 20/20 vision at a maximum distance of 54 feet for every inch height of letter. A witness with 20/40 vision testifying in court regarding a speeding driver claims that he noted the license plate number accurately when he was 85 feet from this speeding car that goes in the same direction. If he claims that he took 1.5 seconds to read the license plate, what is the reliability of his testimony?arrow_forwardUnmanned vehicles are unmanned transportation vehicles, which must have(multiple choice questions)A.sensing technologyb.Decision and Control Technologyc.Positioning TechnologyD.monitoring technologyarrow_forward
- Traffic and Highway EngineeringCivil EngineeringISBN:9781305156241Author:Garber, Nicholas J.Publisher:Cengage LearningEngineering Fundamentals: An Introduction to Engi...Civil EngineeringISBN:9781305084766Author:Saeed MoaveniPublisher:Cengage LearningResidential Construction Academy: House Wiring (M...Civil EngineeringISBN:9781285852225Author:Gregory W FletcherPublisher:Cengage Learning