Concept explainers
Casting molten metal is important in many industrial processes. Centrifugal casting is used for manufacturing pipes, bearings, and many other structures. A variety of sophisticated techniques have been invented, but the basic idea is as illustrated in Figure P4.35. A cylindrical enclosure is rotated rapidly and steadily about a horizontal axis. Molten metal is poured into the rotating cylinder and then cooled, forming the finished product. Turning the cylinder at a high rotation rate forces the solidifying metal strongly to the outside. Any bubbles are displaced toward the axis, so unwanted voids will not be present in the casting. Sometimes it is desirable to form a composite casting, such as for a bearing. Here a strong steel outer surface is poured and then inside it a lining of special low-friction metal. In some applications, a very strong metal is given a coating of corrosion-resistant metal. Centrifugal casting results in strong bonding between the layers.
Suppose a copper sleeve of inner radius 2.10 cm and outer radius 2.20 cm is to be cast. To eliminate bubbles and give high structural integrity, the centripetal acceleration of each bit of metal should be at least 100g. What rate of rotation is required? State the answer in revolutions per minute.
Trending nowThis is a popular solution!
Chapter 4 Solutions
Physics for Scientists and Engineers, Technology Update (No access codes included)
- An aircraft performs a maneuver called an "aileron roll." During this maneuver, the plane turns likea screw as it maintains a straight flight path, which sets the wings in circular motion. If it takes it 35s to complete the circle and the wingspan of the plane is 11 m, what is the acceleration of the wingtip?A) 5.6 m/s2 B) 1.0 m/s2 C) 0.99 m/s2 D) 0.18 m/s2arrow_forwardAs their booster rockets separate, Space Shuttle astronauts typically feel accelerations up to 3g, where g = 9.80 m/s2. In their training, astronauts ride in a device where they experience such an acceleration as a centripetal acceleration. Specifically, the astronaut is fastened securely at the end of a mechanical arm, which then turns at constant speed in a horizontal circle. Determine the rotation rate, in revolutions per second, required to give an astronaut a centripetal acceleration of 3.00g while in circular motion with radius 9.45 m.arrow_forwardFigure P3.31 represents the total acceleration of a particle moving clockwise in a circle of radius 2.50 m at a certain instant of time. For that instant, find (a) the radial acceleration of the particle, (b) the speed of the particle, and (c) its tangential acceleration.arrow_forward
- A basketball player is standing on the floor 10.0 m from the basket as in Figure P4.60. The height of the basket is 3.05 m, and he shoots the ball at a 40.0 angle with the horizontal from a height of 2.00 m. (a) What is the acceleration of the basketball at the highest point in its trajectory? (b) At what speed must the player throw the basketball so that the ball goes through the hoop without striking the backboard?arrow_forwardThe Vomit Comet. In microgravity astronaut training and equipment testing, NASA flies a KC135A aircraft along a parabolic flight path. As shown in Figure P3.45, the aircraft climbs from 24 000 ft to 31 000 ft, where it enters a parabolic path with a velocity of 143 m/s nose high at 45.0 and exits with velocity 143 m/s at 45.0 nose low. During this portion of the flight, the aircraft and objects inside its padded cabin are in free fall; astronauts and equipment float freely as if there were no gravity. What are the aircrafts (a) speed and (b) altitude at the top of the maneuver? (c) What is the time interval spent in microgravity?arrow_forwardThe athlete shown in Figure P4.21 rotates a 1.00-kg discus along a circular path of radius 1.06 m. The maximum speed of the discus is 20.0 m/s. Determine the magnitude of the maximum radial acceleration of the discus. Figure P4.21arrow_forward
- Which of the following is impossible for a car moving in a circular path? Assume that the car is never at rest. (a) The car has tangential acceleration but no centripetal acceleration. (b) The car has centripetal acceleration but no tangential acceleration. (c) The car has both centripetal acceleration and tangential acceleration.arrow_forwardThe Vomit Comet. In microgravity astronaut training and equipment testing, NASA flies a KC135A aircraft along a parabolic flight path. As shown in Figure P4.59, the aircraft climbs from 24 000 ft to 31 000 ft, where it enters a parabolic path with a velocity of 143 m/s nose high at 45.0 and exits with velocity 143 m/s at 45.0 nose low. During this portion of the flight, the aircraft and objects inside its padded cabin are in free fall; astronauts and equipment float freely as if there were no gravity. What are the aircrafts (a) speed and (b) altitude at the top of the maneuver? (c) What is the time interval spent in microgravity?arrow_forwardA golfer hits his approach shot at an angle of 50.0, giving the ball an initial speed of 38.2 m/s (Fig. P4.60). The ball lands on the elevated green, 5.50 m above the initial position near the hole, and stops immediately. a. How much time passed while the ball was in the air? b. How far did the ball travel horizontally before landing? c. What was the peak height reached by the ball? FIGURE P4.60arrow_forward
- If a body takes 't' seconds to go once round the circular path of radius 'r', the velocity 'v' is given by A) v=t2πr B) v=2πrt C) v=2πr2t D) v=πr2tarrow_forwardA ball is thrown horizontally from a cliff with a speed of 8.0 m/s.a) What is the speed of the ball in the y-direction (vy) 2.0 seconds later?b) What is the total speed of the ball (2.0 seconds after the being thrown)?c) The ball lands 3.0 s after being thrown. How high was the cliff?d) How far away from the edge of the cliff does the ball land?arrow_forwardA car starts from rest on a curve with a radius of 130 m and accelerates tangentially at 1.1 m/s2. Through what angle will the car have travelled when the magnitude of its total acceleration is 2.9 m/s2?arrow_forward
- Principles of Physics: A Calculus-Based TextPhysicsISBN:9781133104261Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningPhysics for Scientists and Engineers, Technology ...PhysicsISBN:9781305116399Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningPhysics for Scientists and Engineers: Foundations...PhysicsISBN:9781133939146Author:Katz, Debora M.Publisher:Cengage Learning
- Physics for Scientists and EngineersPhysicsISBN:9781337553278Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningPhysics for Scientists and Engineers with Modern ...PhysicsISBN:9781337553292Author:Raymond A. Serway, John W. JewettPublisher:Cengage Learning