Concept explainers
It is a method of cost accounting, which is used where the production is continuous, and the product needs various processes to complete. This method is used to ascertain the cost of the product at each process or stage of production.
To Prepare: The Memo to JM with a recommendation to management.
Explanation of Solution
Memo
From:
LB
Former Plant manager
Company GP
To:
JM
Current Plant manager
Company GP
Re: Analysis of August month increase in unit costs for Papermaking Department.
Dear Mr. JM,
The increase in the unit costs from the month of July to August happened for both the material costs (pulp and chemical) and conversion costs in the papermaking department, as showed in the table below:
Particulars | July | August |
Material costs (A) | $295,600 | $304,100 |
Conversion costs (B) | $146,000 | $149,600 |
Total cost (A+B) | $441,600 | $453,700 |
Number of tons (C') | 1,200 | 1,130 |
Material cost per ton D = (A ÷ C) | $246.33 | $269.12 |
Conversion cost per ton E =(B ÷ C) | $121.67 | $132.39 |
Total cost per ton (D + E) | $368 | $401.50 |
Table (1)
An analysis was done to segregate the reason of the increased cost per ton. My interviews designated that there were two possible causes. First, we changed the condition of the green paper in early month of August. This may changed the way the paper machines process the green paper. Therefore, it is feasible that the paper machines have unacceptable settings for the new requirement and are over applying materials. Second one is some question, whether paper machine No.1 is need of maintenance. It is possible that our problem is due to lack of repairs on this machine.
Luckily, we run both colors on paper machine No.1 Therefore; we can divide the analysis among these two possible explanations. I have offered the following cost per ton data for the two paper machines and the two product colors:
Analyzing paper machine:
Production Run Number | Paper Machine | Color | Materials costs | Conversion costs | Tons |
1 | 1 | Green | $40,300 | $18,300 | 150 |
2 | 1 | Yellow | $41,700 | $21,200 | 140 |
3 | 1 | Green | $44,600 | $22,500 | 150 |
4 | 1 | Yellow | $36,100 | $18,100 | 120 |
Total | $162,700 | $80,100 | 560 |
Table (2)
Paper Machine No.1 | Material cost per ton (A ÷ C) | Conversion cost per ton (B ÷ C) |
Total direct material costs (A) | $162,700 | |
Total conversion costs (B) | $80,100 | |
Tons (C ) | 560 | 560 |
Cost per ton | $290.54 | $143.04 |
Table (3)
Production Run Number | Paper Machine | Color | Materials costs | Conversion costs | Tons |
5 | 2 | Green | $38,300 | $18,900 | 160 |
6 | 2 | Yellow | $33,900 | $15,200 | 140 |
7 | 2 | Green | $35,600 | $18,400 | 130 |
8 | 2 | Yellow | $33,600 | $17,000 | 140 |
Total | $141,400 | $69,500 | 570 |
Table (4)
Paper Machine No.2 | Material cost per ton (A ÷ C) | Conversion cost per ton (B ÷ C) |
Total direct material costs | $141,400 | |
Total conversion costs | $69,500 | |
Tons | 570 | 570 |
Cost per ton | $248.07 | $121.93 |
Table (5)
Particulars | Paper Machine No.1 (A) | Paper Machine No.2 (B) | Difference (A – C) |
Material cost per ton | $290.54 | $143.04 | $147.50 |
Conversion cost per ton | $248.07 | $121.93 | $126.14 |
Table (6)
Product color analysis:
Production Run Number | Paper Machine | Color | Materials costs | Conversion costs | Tons |
1 | 1 | Green | $40,300 | $18,300 | 150 |
3 | 1 | Green | $44,600 | $22,500 | 150 |
5 | 2 | Green | $38,300 | $18,900 | 160 |
7 | 2 | Green | $35,600 | $18,400 | 130 |
Total | $158,800 | $78,100 | 590 |
Table (7)
Production Run Number | Paper Machine | Color | Materials costs | Conversion costs | Tons |
2 | 1 | Yellow | $41,700 | $21,200 | 140 |
4 | 1 | Yellow | $36,100 | $18,100 | 120 |
6 | 2 | Yellow | $33,900 | $15,200 | 140 |
8 | 2 | Yellow | $33,600 | $17,000 | 140 |
Total | $145,300 | $71,500 | 540 |
Table (8)
Green Paper | Material cost per ton (A ÷ C) | Conversion cost per ton (B ÷ C) |
Total direct material costs (A) | $158,800 | |
Total conversion costs (B) | $78,100 | |
Tons (C ) | 590 | 590 |
Cost per ton | $269.15 | $132.37 |
Table (9)
Yellow Paper | Material cost per ton (A ÷ C) | Conversion cost per ton (B ÷ C) |
Total direct material costs (A) | $145,300 | |
Total conversion costs (B) | $71,500 | |
Tons (C ) | 540 | 540 |
Cost per ton | $269.07 | $132.41 |
Table (10)
Particulars | Green Paper (A) | Yellow Paper (B) | Difference (A – C) |
Material cost per ton | $269.15 | $269.07 | $0.08 |
Conversion cost per ton | $132.37 | $132.41 | ($0.04) |
The outcomes are clear. Paper machine 1 has a considerably higher materials and conversion cost per ton in August. It appears that, the paper machine is over applying pulp. This is resultant in a growth in both the materials and conversion cost per ton. Paper machine No.2 is consecutively at a cost near out chronological cost per ton. There is no proof of a color delinquent. Both color papers are consecutively at or near the same materials and conversion cost per ton. Therefore, the requirement change for green has not performed to reason a problem in the papermaking operation. I
Please let me know if you need any more clarifications on this matter.
Regards,
LB
Want to see more full solutions like this?
Chapter 18 Solutions
CENGAGENOWV2 FOR WARREN'S FINANCIAL & M
- Preparation of Income Statement: Manufacturing Firm Laworld Inc. manufactures small camping tents. Last year, 200,000 tents were made and sold for 60 each. Each tent includes the following costs: The only selling expenses were a commission of 2 per unit sold and advertising totaling 100,000. Administrative expenses, all fixed, equaled 300,000. There were no beginning or ending finished goods inventories. There were no beginning or ending work-in-process inventories. Required: 1. Calculate the product cost for one tent. Calculate the total product cost for last year. 2. CONCEPTUAL CONNECTION Prepare an income statement for external users. Did you need to prepare a supporting statement of cost of goods manufactured? Explain. 3. CONCEPTUAL CONNECTION Suppose 200,000 tents were produced (and 200,000 sold) but that the company had a beginning finished goods inventory of 10,000 tents produced in the prior year at 40 per unit. The company follows a first-in, first-out policy for its inventory (meaning that the units produced first are sold first for purposes of cost flow). What effect does this have on the income statement? Show the new statement.arrow_forwardAlgers Company produces dry fertilizer. At the beginning of the year, Algers had the following standard cost sheet: Algers computes its overhead rates using practical volume, which is 54,000 units. The actual results for the year are as follows: a. Units produced: 53,000 b. Direct materials purchased: 274,000 pounds at 2.50 per pound c. Direct materials used: 270,300 pounds d. Direct labor: 40,100 hours at 17.95 per hour e. Fixed overhead: 161,700 f. Variable overhead: 122,000 Required: 1. Compute price and usage variances for direct materials. 2. Compute the direct labor rate and labor efficiency variances. 3. Compute the fixed overhead spending and volume variances. Interpret the volume variance. 4. Compute the variable overhead spending and efficiency variances. 5. Prepare journal entries for the following: a. The purchase of direct materials b. The issuance of direct materials to production (Work in Process) c. The addition of direct labor to Work in Process d. The addition of overhead to Work in Process e. The incurrence of actual overhead costs f. Closing out of variances to Cost of Goods Soldarrow_forwardPetrillo Company produces engine parts for large motors. The company uses a standard cost system for production costing and control. The standard cost sheet for one of its higher volume products (a valve) is as follows: During the year, Petrillo had the following activity related to valve production: a. Production of valves totaled 20,600 units. b. A total of 135,400 pounds of direct materials was purchased at 5.36 per pound. c. There were 10,000 pounds of direct materials in beginning inventory (carried at 5.40 per pound). There was no ending inventory. d. The company used 36,500 direct labor hours at a total cost of 656,270. e. Actual fixed overhead totaled 110,000. f. Actual variable overhead totaled 168,000. Petrillo produces all of its valves in a single plant. Normal activity is 20,000 units per year. Standard overhead rates are computed based on normal activity measured in standard direct labor hours. Required: 1. Compute the direct materials price and usage variances. 2. Compute the direct labor rate and efficiency variances. 3. Compute overhead variances using a two-variance analysis. 4. Compute overhead variances using a four-variance analysis. 5. Assume that the purchasing agent for the valve plant purchased a lower-quality direct material from a new supplier. Would you recommend that the company continue to use this cheaper direct material? If so, what standards would likely need revision to reflect this decision? Assume that the end products quality is not significantly affected. 6. Prepare all possible journal entries (assuming a four-variance analysis of overhead variances).arrow_forward
- Cost Classification Loring Company incurred the following costs last year: Required: 1. Classify each of the costs using the following table format. Be sure to total the amounts in each column. Example: Direct materials, 216,000. 2. What was the total product cost for last year? 3. What was the total period cost for last year? 4. If 30,000 units were produced last year, what was the unit product cost?arrow_forwardThe following product costs are available for Kellee Company on the production of eyeglass frames: direct materials, $32,125; direct labor, $23.50; manufacturing overhead, applied at 225% of direct labor cost; selling expenses, $22,225; and administrative expenses, $31,125. The direct labor hours worked for the month are 3,200 hours. A. What are the prime costs? B. What are the conversion costs? C. What is the total product cost? D. What is the total period cost? E. If 6.425 equivalent units are produced, what is the equivalent material cost per unit? F. What is the equivalent conversion cost per unit?arrow_forwardCommunications Jamarcus Bradshaw, plant manager of Georgia Paper Companys papermaking mill, was looking over the cost of production reports for July and August for the Papermaking Department. The reports revealed the following: Jamarcus was concerned about the increased cost per ton from the output of the department. As a result, he asked the plant controller to perform a study to help explain these results. The controller, Leann Brunswick, began the analysis by performing some interviews of key plant personnel in order to understand what the problem might be. Excerpts from an interview with Len Tyson, a paper machine operator, follow: Len: We have two papermaking machines in the department. I have no data, but I think paper machine No. 1 is applying too much pulp and, thus, is wasting both conversion and materials resources. We haven't had repairs on paper machine No. 1 in a while. Maybe this is the problem. Leann: How does too much pulp result in wasted resources? Len: Well, you see, if too much pulp is applied, then we will waste pulp material. The customer will not pay for the extra product; we just use more material to make the product. Also, when there is too much pulp, the machine must be slowed down in order to complete the drying process. This results in additional conversion costs. Leann: Do you have any other suspicions? Len: Well, as you know, we have two productsgreen paper and yellow paper. They are identical except for the color. The color is added to the papermaking process in the paper machine. I think that during August these two color papers have been behaving very differently. I don't have any data, but it just seems as though the amount of waste associated with the green paper has increased. Leann: Why is this? Len: I understand that there has been a change in specifications for the green paper, starting near the beginning of August. This change could be causing the machines to run poorly when making green paper. If this is the case, the cost per ton would increase for green paper. Leann also asked for a database printout providing greater detail on Augusts operating results. September 9 Requested by: Leann Brunswick Papermaking DepartmentAugust detail Prior to preparing a report, Leann resigned from Georgia Paper Company to start her own business. You have been asked to take the data that Leann collected, and write a memo to Jamarcus Bradshaw with a recommendation to management. Your memo should include analysis of the August data to determine whether the paper machine or the paper color explains the increase in the unit cost from July. Include any supporting schedules that are appropriate. Round any calculations to the nearest cent.arrow_forward
- Standard unit cost and journal entries The normal capacity of Algonquin Adhesives Inc. is 40,000 direct labor hours and 20,000 units per month. A finished unit requires 6 lb of materials at an estimated cost of 2 per pound. The estimated cost of labor is 10.00 per hour. The plant estimates that overhead (all variable) for a month will be 40,000. During the month of March, the plant totaled 34,800 direct labor hours at an average rate of 9.50 an hour. The plant produced 18,000 units, using 105,000 lb of materials at a cost of 2.04 per pound. 1. Prepare a standard cost summary showing the standard unit cost. 2. Make journal entries to charge materials and labor to Work in Process.arrow_forwardTransferred-In Cost Powers Inc. produces a protein drink. The product is sold by the gallon. The company has two departments: mixing and bottling. For August, the bottling department had 70,000 gallons in beginning inventory (with transferred-in costs of 283,000) and completed 262,500 gallons during the month. Further, the mixing department completed and transferred out 240,000 gallons at a cost of 957,000 in August. Required: 1. Prepare a physical flow schedule for the bottling department. 2. Calculate equivalent units for the transferred-in category. 3. Calculate the unit cost for the transferred-in category.arrow_forwardTransferred-In Cost Vigor Inc. produces an energy drink. The product is sold by the quart. The company has two departments: mixing and bottling. For May, the bottling department had 30,000 quarts in beginning inventory (with transferred-in costs of 63,000) and completed 140,000 quarts during the month. Further, the mixing department completed and transferred out 120,000 gallons at a cost of 237,000 in May. Required: 1. Prepare a physical flow schedule for the bottling department. 2. Calculate equivalent units for the transferred-in category. 3. Calculate the unit cost for the transferred-in category.arrow_forward
- Total Pops data show the following information: New machinery will be added in April. This machine will reduce the labor required per unit and increase the labor rate for those employees qualified to operate the machinery. Finished goods inventory is required to be 20% of the next months requirements. Direct material requires 2 pounds per unit at a cost of $3 per pound. The ending inventory required for direct materials is 15% of the next months needs. In January, the beginning inventory is 3,000 units of finished goods and 4,470 pounds of material. Prepare a production budget, direct materials budget, and direct labor budget for the first quarter of the year.arrow_forwardZippy Inc. manufactures a fuel additive, Surge, which has a stable selling price of 44 per drum. The company has been producing and selling 80,000 drums per month. In connection with your examination of Zippys financial statements for the year ended September 30, management has asked you to review some computations made by Zippys cost accountant. Your working papers disclose the following about the companys operations: Standard costs per drum of product manufactured: Materials: Costs and expenses during September: Chemicals: 645,000 gallons purchased at a cost of 1,140,000; 600,000 gallons used. Empty drums: 94,000 purchased at a cost of 94,000; 80,000 drums used. Direct labor: 81,000 hours worked at a cost of 816,480. Factory overhead: 768,000. Required: Calculate the following for September, using the formulas on pages 421422 and 424 (Round unit costs to the nearest whole cent and compute the materials variances for both Surge and for the drums.): 1. Materials quantity variance. 2. Materials purchase price variance. 3. Labor efficiency variance. 4. Labor rate variance.arrow_forwardFresno Industries Inc. manufactures and sells high-quality camping tents. The company began operations on January 1 and operated at 100% of capacity (150,000 units) during the first month, creating an ending inventory of 20,000 units. During February, the company produced 130,000 units during the month but sold 150,000 units at 500 per unit. The February manufacturing costs and selling and administrative expenses were as follows: a. Prepare an income statement according to the absorption costing concept for the month ending February 28. b. Prepare an income statement according to the variable costing concept for for the month ending February 28. c. What is the reason for the difference in the amount of operating income reported in (a) and (b)?arrow_forward
- Managerial AccountingAccountingISBN:9781337912020Author:Carl Warren, Ph.d. Cma William B. TaylerPublisher:South-Western College PubPrinciples of Cost AccountingAccountingISBN:9781305087408Author:Edward J. Vanderbeck, Maria R. MitchellPublisher:Cengage LearningPrinciples of Accounting Volume 2AccountingISBN:9781947172609Author:OpenStaxPublisher:OpenStax College
- Managerial Accounting: The Cornerstone of Busines...AccountingISBN:9781337115773Author:Maryanne M. Mowen, Don R. Hansen, Dan L. HeitgerPublisher:Cengage LearningCornerstones of Cost Management (Cornerstones Ser...AccountingISBN:9781305970663Author:Don R. Hansen, Maryanne M. MowenPublisher:Cengage LearningFinancial And Managerial AccountingAccountingISBN:9781337902663Author:WARREN, Carl S.Publisher:Cengage Learning,