Vector Mechanics for Engineers: Statics and Dynamics
Vector Mechanics for Engineers: Statics and Dynamics
12th Edition
ISBN: 9781259638091
Author: Ferdinand P. Beer, E. Russell Johnston Jr., David Mazurek, Phillip J. Cornwell, Brian Self
Publisher: McGraw-Hill Education
bartleby

Concept explainers

bartleby

Videos

Question
Book Icon
Chapter 18.1, Problem 18.52P
To determine

The kinetic energy (U) lost when plate hits the obstruction at B.

Expert Solution & Answer
Check Mark

Answer to Problem 18.52P

The kinetic energy (U) lost when plate hits the obstruction at B is 7192ma2ω02_.

Explanation of Solution

Given information:

The mass of the square plate is m.

The side of a square plate is a.

The angular velocity (ω) is ω0j

Assume the impact to be perfectly plastic that is e=0.

Calculation:

Draw the diagram of the system as in Figure (1).

<x-custom-btb-me data-me-id='1725' class='microExplainerHighlight'>Vector</x-custom-btb-me> Mechanics for Engineers: Statics and Dynamics, Chapter 18.1, Problem 18.52P , additional homework tip  1

The length of the diagonal of a square is obtained by multiplying the side with 2.

Write the expression for the angular velocity in the x axis (ωx) as follows:

ωx=22ω0

Here, ω0 is the initial angular velocity.

Write the expression for the angular velocity in the y axis (ωy) as follows:

ωy=22ω0

The unit vectors along the x and y axis are represented by i and j.

Write the expression for the initial angular momentum about the mass center (HG)0 as follows:

(HG)0=I¯xωxi+I¯yωyj (1)

Here, (HG)0 is the initial angular momentum about the mass center, I¯x is the moment of inertia in the x direction and I¯y is the moment of inertia in the y direction.

Write the expression for the moment of inertia in the x direction (I¯x) as follows:

I¯x=112ma2

Here, m is the mass and a is the side of the square plate.

Due to symmetry, moment of inertia in the x and y axes are the same.

Write the expression for the angular momentum about z axis (I¯z) as follows:

I¯z=112ma2

Substitute 112ma2 for I¯x, 112ma2 for I¯y, 22ω0 for ωx, and 22ω0 for ωy in Equation (1).

(HG)0=(112ma2)(22ω0)i+(112ma2)(22ω0)j=1242ma2ω0i+1242ma2ω0j (2)

Calculate the angular velocity at B (vB) using the formula:

vB=ω×rB/A

Here, ω is the angular velocity of the rotating plate and rB/A is the distance of B with respect to A.

Substitute ωxi+ωyj+ωzk for ω and aj for rB/A.

vB=(ωxi+ωyj+ωzk)×(aj)

The matrix multiplication for vector product is done.

vB=a(ωzi+ωxk)

The corner B does not rebound after impact. Therefore, the velocity of B after impact in the z axis (vB)z is zero. The angular velocity in the x axis (ωx) is also zero.

Calculate the angular velocity about the mass center (v¯) using the formula:

v¯=ω×rG/A

Here, rG/A is the distance of mass center with respect to A.

Substitute ωxi+ωyj+ωzk for ω and 12a(ij) for rG/A.

v¯=(ωxi+ωyj+ωzk)×12a(ij)

Substitute 0 for ωx.

v¯=(ωyj+ωzk)×12a(ij)

Write the matrix multiplication for vector product is done.

v¯=12a(ωziωzj+ωyk) (3)

Write the expression for the angular momentum about A as follows:

HA=HG+rG/A×mv¯ (4)

Here, HA is the angular momentum about A and HG is the angular momentum about the mass center.

Calculate the angular momentum about G using the formula:

HG=I¯xωxi+I¯yωyj+I¯zωzk

Substitute 0 for ωx, 112ma2 for I¯y, and 16ma2 for I¯z.

HG=(112ma2)ωyj+(16ma2)ωzk (5)

Substitute (112ma2)ωyj+(16ma2)ωzk for HG, 12a(ij) for rG/A, and 12a(ωziωzjωyk) for v¯ in Equation (4).

HA=[(112ma2)ωyj+(16ma2)ωzk+[12a(ij)×m12a(ωziωzjωyk)]]

The matrix multiplication is done for vector product.

HA=[(112ma2)ωyj+(16ma2)ωzk+14ma2(ωyi+ωyj+2ωzk)]=[14ma2ωyi+112ma2ωyj+14ma2ωyj+16ma2ωzk+12ma2ωzk]=14ma2ωyi+13ma2ωyj+23ma2ωzk (6)

The initial velocity of mass center (v¯0) is zero.

Calculate the initial momentum about A using the relation:

(HA)0=(HG)0+rG/A×mv¯0

Here, (HA)0 is the angular momentum of the mass center before impact.

Substitute 1242ma2ω0i+1242ma2ω0j for (HG)0, 12a(ij) for rG/A, and 0 for v¯0.

(HA)0=1242ma2ω0i+1242ma2ω0j+12a(ij)×0=1242ma2ω0i+1242ma2ω0j (7)

Draw the forces acting on the plate as in Figure (2).

Vector Mechanics for Engineers: Statics and Dynamics, Chapter 18.1, Problem 18.52P , additional homework tip  2

Write the expression for the moment about A as follows:

(HA)0+(aj)×(FΔt)k=HA

The matrix multiplication for vector product is done.

(HA)0(aFΔt)i=HA

Substitute Equation (6) and Equation (7).

[1242ma2ω0i+1242ma2ω0j(aFΔt)i]=[14ma2ωyi+13ma2ωyj+23ma2ωzk] (8)

Equate i components from Equation (8).

1242ma2ω0(aFΔt)=14ma2ωy (9)

Equate j components from Equation (8).

1242ma2ω0=13ma2ωyωy=3242ma2ω0ma2ωy=182ω0

Equate k components from Equation (8).

0=23ma2ωzωz=0

Calculate the velocity along the x, y and z axes (v¯) using the formula:

v¯=12a(ωziωzj+ωyk)

Substitute 0 for ωz.

v¯=12a((0)i(0)jωyk)=12aωyk

Substitute 182ω0 for ωy.

v¯=12a(182ω0)k=1162aω0k

Calculate the kinetic energy of the system before impact (T0) using the formula:

T0=12mv¯0+12I¯xωx2+12I¯yωy2+12I¯zωz2

Substitute 0 for v¯0, 182ω0 for ωy, 0 for ωz, 0 for ωx, 112ma2 for I¯y, and 112ma2 for I¯x.

T0=0+12(112ma2)(22ω0)2+0+12(112ma2)(22ω0)2+0=148ma2ω02+148ma2ω02=124ma2ω02

Calculate the kinetic energy of the system after impact (T1) using the formula:

T1=12mv¯+12I¯xωx2+12I¯yωy2+12I¯zωz2

Substitute 1162aω0 for v¯, 28ω0 for ωy, 0 for ωz, 0 for ωx, 112ma2 for I¯y, and 112ma2 for I¯x.

T0=12m(1162aω0)2+0+12(112ma2)(28ω0)2+0=ma2ω02(1256+1768)=ma2ω02(4768)=1192ma2ω02

Calculate the loss in kinetic energy (U) using the formula:

U=T0T1

Substitute 124ma2ω02 for T0 and 1192ma2ω02 for T1.

U=124ma2ω021192ma2ω02=81192ma2ω02=7192ma2ω02

Thus, the kinetic energy (U) lost when plate hits the obstruction at B is 7192ma2ω02_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
A long ladder of length l, mass m, and centroidal mass moment of inertia I is placed against a house at an angle 0=0O. Knowing that the ladder is released from rest, determine the angular velocity of the ladder when 0=02. Assume the ladder can slide freely on the horizontal ground and on the vertical wall.
The 30-kg reel is mounted on a 20 kg cart. The reel is free to rotate about the axle O. The radius of gyration, kO​, about the mass center, O, is 250 mm and a cable is wrapped around the inner hub of the wheel. The mass of the wheels on the cart and the mass of the cable may be neglected. The system is at rest when a force, P, of 50 N is applied to the end of the cable. a) Determine the velocity of the cart after 4 seconds m/s b) determine the angular velocity of the reel, in rad/s. [Correct answers are a) 4.0 m/s b) 16 rad/s
A bullet weighing 0.08 lb is fired with a horizontal velocity of 1800 ft/s into the lower end of a slender 15-lb bar of length L = 30 in. Knowing that h = 12 in. and that the bar is initially at rest, determine (a) the angular velocity of the bar immediately after the bullet becomes embedded, (b ) the impulsive reaction at C , assuming that the bullet becomes embedded in 0.001 s.

Chapter 18 Solutions

Vector Mechanics for Engineers: Statics and Dynamics

Ch. 18.1 - Prob. 18.12PCh. 18.1 - Prob. 18.13PCh. 18.1 - Two L-shaped arms each have a mass of 5 kg and are...Ch. 18.1 - For the assembly of Prob. 18.15, determine (a) the...Ch. 18.1 - Prob. 18.17PCh. 18.1 - Determine the angular momentum of the shaft of...Ch. 18.1 - Prob. 18.20PCh. 18.1 - Prob. 18.21PCh. 18.1 - Prob. 18.22PCh. 18.1 - Prob. 18.23PCh. 18.1 - Prob. 18.24PCh. 18.1 - Prob. 18.25PCh. 18.1 - Prob. 18.26PCh. 18.1 - Prob. 18.27PCh. 18.1 - Prob. 18.28PCh. 18.1 - A circular plate of mass m is falling with a...Ch. 18.1 - Prob. 18.30PCh. 18.1 - Prob. 18.31PCh. 18.1 - Determine the impulse exerted on the plate of...Ch. 18.1 - The coordinate axes shown represent the principal...Ch. 18.1 - Prob. 18.34PCh. 18.1 - Prob. 18.37PCh. 18.1 - Prob. 18.38PCh. 18.1 - Prob. 18.39PCh. 18.1 - Prob. 18.40PCh. 18.1 - Prob. 18.41PCh. 18.1 - Prob. 18.42PCh. 18.1 - Determine the kinetic energy of the disk of Prob....Ch. 18.1 - Determine the kinetic energy of the solid...Ch. 18.1 - Prob. 18.45PCh. 18.1 - Determine the kinetic energy of the disk of Prob....Ch. 18.1 - Determine the kinetic energy of the assembly of...Ch. 18.1 - Determine the kinetic energy of the shaft of Prob....Ch. 18.1 - Prob. 18.49PCh. 18.1 - Prob. 18.50PCh. 18.1 - Determine the kinetic energy lost when edge C of...Ch. 18.1 - Prob. 18.52PCh. 18.1 - Prob. 18.53PCh. 18.1 - Determine the kinetic energy of the space probe of...Ch. 18.2 - Determine the rate of change HG of the angular...Ch. 18.2 - Prob. 18.56PCh. 18.2 - Determine the rate of change HG of the angular...Ch. 18.2 - Prob. 18.58PCh. 18.2 - Prob. 18.59PCh. 18.2 - Determine the rate of change HG of the angular...Ch. 18.2 - Prob. 18.61PCh. 18.2 - Determine the rate of change HD of the angular...Ch. 18.2 - Prob. 18.63PCh. 18.2 - Prob. 18.64PCh. 18.2 - A slender, uniform rod AB of mass m and a vertical...Ch. 18.2 - Prob. 18.66PCh. 18.2 - The assembly shown consists of pieces of sheet...Ch. 18.2 - The 8-kg shaft shown has a uniform cross-section....Ch. 18.2 - Prob. 18.69PCh. 18.2 - Prob. 18.70PCh. 18.2 - Prob. 18.71PCh. 18.2 - Knowing that the plate of Prob. 18.66 is initially...Ch. 18.2 - Prob. 18.73PCh. 18.2 - The shaft of Prob. 18.68 is initially at rest ( =...Ch. 18.2 - The assembly shown weighs 12 lb and consists of 4...Ch. 18.2 - Prob. 18.76PCh. 18.2 - Prob. 18.79PCh. 18.2 - Prob. 18.80PCh. 18.2 - Prob. 18.81PCh. 18.2 - Prob. 18.82PCh. 18.2 - The uniform, thin 5-lb disk spins at a constant...Ch. 18.2 - The essential structure of a certain type of...Ch. 18.2 - A model of a type of crusher is shown. A disk of...Ch. 18.2 - Prob. 18.86PCh. 18.2 - Prob. 18.87PCh. 18.2 - The 2-lb gear A is constrained to roll on the...Ch. 18.2 - Prob. 18.89PCh. 18.2 - Prob. 18.90PCh. 18.2 - 18.90 and 18.91The slender rod AB is attached by a...Ch. 18.2 - The essential structure of a certain type of...Ch. 18.2 - The 10-oz disk shown spins at the rate 1 = 750...Ch. 18.2 - Prob. 18.94PCh. 18.2 - Prob. 18.95PCh. 18.2 - Two disks each have a mass of 5 kg and a radius of...Ch. 18.2 - Prob. 18.97PCh. 18.2 - Prob. 18.98PCh. 18.2 - A thin disk of mass m = 4 kg rotates with an...Ch. 18.2 - Prob. 18.101PCh. 18.2 - Prob. 18.102PCh. 18.2 - A 2.5-kg homogeneous disk of radius 80 mm rotates...Ch. 18.2 - A 2.5-kg homogeneous disk of radius 80 mm rotates...Ch. 18.2 - For the disk of Prob. 18.99, determine (a) the...Ch. 18.3 - A uniform thin disk with a 6-in. diameter is...Ch. 18.3 - A uniform thin disk with a 6-in. diameter is...Ch. 18.3 - Prob. 18.109PCh. 18.3 - The top shown is supported at the fixed point O...Ch. 18.3 - Prob. 18.111PCh. 18.3 - Prob. 18.112PCh. 18.3 - Prob. 18.113PCh. 18.3 - A homogeneous cone with a height of h = 12 in. and...Ch. 18.3 - Prob. 18.115PCh. 18.3 - Prob. 18.116PCh. 18.3 - Prob. 18.117PCh. 18.3 - The propeller of an air boat rotates at 1800 rpm....Ch. 18.3 - Prob. 18.119PCh. 18.3 - Prob. 18.120PCh. 18.3 - Prob. 18.121PCh. 18.3 - Prob. 18.122PCh. 18.3 - Prob. 18.123PCh. 18.3 - A coin is tossed into the air. It is observed to...Ch. 18.3 - Prob. 18.125PCh. 18.3 - Prob. 18.126PCh. 18.3 - Prob. 18.127PCh. 18.3 - Prob. 18.128PCh. 18.3 - Prob. 18.129PCh. 18.3 - Prob. 18.130PCh. 18.3 - Prob. 18.131PCh. 18.3 - Prob. 18.132PCh. 18.3 - Prob. 18.133PCh. 18.3 - Prob. 18.134PCh. 18.3 - Prob. 18.135PCh. 18.3 - A homogeneous disk with a radius of 9 in. is...Ch. 18.3 - The top shown is supported at the fixed point O....Ch. 18.3 - Prob. 18.138PCh. 18.3 - Prob. 18.139PCh. 18.3 - Prob. 18.140PCh. 18.3 - Prob. 18.141PCh. 18.3 - Prob. 18.142PCh. 18.3 - Consider a rigid body of arbitrary shape that is...Ch. 18.3 - Prob. 18.144PCh. 18.3 - Prob. 18.145PCh. 18 - Three 25-lb rotor disks are attached to a shaft...Ch. 18 - Prob. 18.148RPCh. 18 - Prob. 18.149RPCh. 18 - A uniform rod of mass m and length 5a is bent into...Ch. 18 - Prob. 18.151RPCh. 18 - Prob. 18.152RPCh. 18 - Prob. 18.153RPCh. 18 - Prob. 18.154RPCh. 18 - Prob. 18.155RPCh. 18 - The space capsule has no angular velocity when the...Ch. 18 - A homogeneous rectangular plate of mass m and...Ch. 18 - The essential features of the gyrocompass are...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Material Properties 101; Author: Real Engineering;https://www.youtube.com/watch?v=BHZALtqAjeM;License: Standard YouTube License, CC-BY