Concept explainers
DATA CP Design of an Inkjet Printer. Inkjet printers can be described as either continuous or drop-on-demand. In a continuous inkjet printer, letters are built up by squirting drops of ink at the paper from a rapidly moving nozzle. You are part of an engineering group working on the design of such a printer. Each ink drop will have a mass of 1.4 × 10−8 g. The drops will leave the nozzle and travel toward the paper at 50m/s, passing through a charging unit that gives each drop a positive charge q by removing some electrons from it. The drops will then pass between parallel deflecting plates, 2.0 cm long, where there is a uniform vertical electric field with magnitude 80 × 104 N/C. Your team is working on the design of the charging unit that places the charge on the drops, (a) It a drop is to be deflected 0.30 mm by the time it reaches the end of the deflection plates, what magnitude of charge must be given to the drop? How many electrons must be removed from the drop to give it this charge? (b) If the unit that produces the stream of drops is redesigned so that it produces drops with a speed of 25 m/s, what q value is needed to achieve the same 0.30-min deflection?
Want to see the full answer?
Check out a sample textbook solutionChapter 21 Solutions
University Physics (14th Edition)
Additional Science Textbook Solutions
College Physics (10th Edition)
Cosmic Perspective Fundamentals
Lecture- Tutorials for Introductory Astronomy
The Cosmic Perspective (8th Edition)
Physics for Scientists and Engineers with Modern Physics
- Try to complete Table P26.4 from memory. If you must look back in this chapter or other chapters for information, note the page number, figure number, or equation number that helped you. TABLE P26.4arrow_forwardA parallel-plate capacitor in air has a plate separation of 1.50 cm and a plate area of 25.0 cm2. The plates are charged to a potential difference of 250 V and disconnected from the source. The capacitor is then immersed in distilled water. Assume the liquid is an insulator. Determine (a) the charge on the plates before and after immersion, (b) the capacitance and potential difference after immersion, and (c) the change in energy of the capacitor.arrow_forwardAn electrophorus is a device developed more than 200 years ago for the purpose of charging objects. The insulator on top of a pedestal is rubbed with a cloth, such as wool (Fig. P23.18A). A conductor is placed on top of the insulator, and the conductor is connected to ground by a conducting wire (Fig. P23.18B). (The conductor has an insulating handle, so charge cannot be transferred between the person and the conductor.) The conductor is then removed (Fig. P23.18C). The conductor may then be used to transfer charge to other objects. If the insulators charge after being Ribbed with the wool is negative, what is the charge of the conductor when it is removed?arrow_forward
- A GeigerMueller tube is a radiation detector that consists of a closed, hollow, metal cylinder (the cathode) of inner radius ra and a coaxial cylindrical wire (the anode) of radius rb (Fig. P24.42a). The charge per unit length on the anode is , and the charge per unit length on the cathode is . A gas fills the space between the electrodes. When the tube is in use (for example, in measuring radioactivity from fruit in Fig. P24.42b) and a high-energy elementary particle passes through this space, it can ionize an atom of the gas. The strong electric field makes the resulting ion and electron accelerate in opposite directions. They strike other molecules of the gas to ionize them, producing an avalanche of electrical discharge. The pulse of electric current between the wire and the cylinder is counted by an external circuit. (a) Show that the magnitude of the electric potential difference between the wire and the cylinder is V2keln(rarb) (b) Show that the magnitude of the electric field in the space between cathode and anode is E=Vln(ra/rb)(1r) where r is the distance from the axis of the anode to the point where the field is to be calculated. Figure P24.42arrow_forwardTry to complete Table P26.5 from memory. If you must look back in the chapter for information, note the page number, figure number, or equation number that helped you. TABLE P26.5arrow_forwardTo form a helium atom, an alpha particle that contains two protons and two neutrons is fixed at one location, and two electrons are brought in from far away, one at a time. The first electron is placed at 0.6001010 m from the alpha particle and held there while the second electron is brought to 0.6001010 m from the alpha particle on the other side from the first electron. See die final configuration below, (a) How much work is done in each step? (b) What is the electrostatic energy of die alpha particle and two electrons in the final configuration?arrow_forward
- Look up (presumably online, or by dismantling an old device and making measurements) the magnitude of the potential deflection plates (and the space between them) in an ink jet printer. Then look up the speed with which the ink comes out the nozzle. Can you calculate the typical mass of an ink drop?arrow_forwardEach of the following statements is related to conductors in electrostatic equilibrium. Choose the words that make each statement correct. (i) The net charge is always zero [(a) inside; (b) on] the surface of an isolated conductor. (ii) The electric field is always zero [(c) inside; (d) just outside] a perfect conductor. (iii) The charge density on the surface of an isolated, charged conductor is highest where the surface is [(e) sharpest; (f) smoothest].arrow_forwardLightning can be studied with a Van de Graaff generator, which consists of a spherical dome on which charge is continuously deposited by a moving belt. Charge can be added until the electric field at the surface of the dome becomes equal to the dielectric strength of air. Any more charge leaks off in sparks as shown in Figure P25.52. Assume the dome has a diameter of 30.0 cm and is surrounded by dry air with a "breakdown" electric field of 3.00 106 V/m. (a) What is the maximum potential of the dome? (b) What is the maximum charge on the dome?arrow_forward
- Each of the following statements is related to conductors in electrostatic equilibrium. Choose the words that make each statement correct. (i) The net charge is always zero [(a) inside; (b) on] the surface of an isolated conductor. (ii) The electric field is always zero [(c) inside; (d) just outside] a perfect conductor. (iii) The charge density on the surface of an isolated, charged conductor is highest where the surface is [(e) sharpest; (f) smoothest].arrow_forwardA constant electric field accelerates a proton from rest through a distance of 2.00 m to a speed of 1.50 105 m/s. (a) Find the change in the protons kinetic energy. (b) Find the change in the systems electric potential energy. (c) Calculate the magnitude of the electric field.arrow_forwardUnreasonable Results (a) What is the final speed of an electron accelerated from rest through a voltage of 25.0 MV by a negatively charged Van de Graaff terminal? (b) What is unreasonable about this result? (C) Which assumptions are responsible?arrow_forward
- Physics for Scientists and Engineers: Foundations...PhysicsISBN:9781133939146Author:Katz, Debora M.Publisher:Cengage LearningCollege PhysicsPhysicsISBN:9781285737027Author:Raymond A. Serway, Chris VuillePublisher:Cengage Learning
- Principles of Physics: A Calculus-Based TextPhysicsISBN:9781133104261Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningCollege PhysicsPhysicsISBN:9781305952300Author:Raymond A. Serway, Chris VuillePublisher:Cengage LearningPhysics for Scientists and EngineersPhysicsISBN:9781337553278Author:Raymond A. Serway, John W. JewettPublisher:Cengage Learning