(a) >
Interpretation:
The laboratory unit operation will be listed that will be used for ascertaining the presence or absence of lead in flakes of dry paint.
Concept introduction:
The sequential steps of the unit operations which are used for the laboratory experiments that are helpful in determining the required and correct results.
(a) >
Answer to Problem 33.1QAP
The sequential steps of unit operations which are used in ascertaining the presence or absence of lead in flakes of dry paint are:
Collection of samples, preparation of laboratory sample, dissolving of sample, changing of chemical form, measurement of property, calculation of results and estimation of reliability.
Explanation of Solution
The following steps will be used for the experiment in ascertaining the presence or absence of lead in flakes of dry paint-
- Collect sample- In this step, the sample of dry paint will be collected.
- Preparation of laboratory sample- In this step, preparation of the sample by grinding and mixing will be done.
- Dissolving of sample- In this step, sample will be heated with oxidizing acid after the grinding and mixing process. Later, the heating solution water will be added to dilute the solution.
- Changing of chemical form- This step is somehow not required because there is no need to change the chemical form.
- Measurement of property- In this step, the final solution is transferred to the ICP or inductively coupled plasma for its measurement and detection.
- Calculation of results- In this step, the obtained result that is spectrum of the lead is compared with standard result of spectrum.
- Estimation of reliability- Finally a rough estimation is to be drawn to determine the amount of lead level which concludes the presence or absence of the lead in the flakes of dry paint.
Therefore, the above sequential laboratory steps are used for ascertaining the presence or absence of lead in flakes of dry paint.
(b)
Interpretation:
The laboratory unit operation will be listed that will be used to determine the iron content of multiple-vitamin and mineral tablets.
Concept introduction:
The sequential steps of the unit operations which are used for the laboratory experiments that are helpful in the determination of the required and correct results.
Answer to Problem 33.1QAP
The unit operations which are used in determining of the iron content of multiple-vitamin and mineral tablets are −
Acquire sample, Preparation of laboratory sample, dissolving of sample, changing of chemical form, Eliminate interferences, Measurement of property, Calculation of results and Estimation of reliability.
Explanation of Solution
The following steps will be used for the experiment in determining the iron content of multiple-vitamin and mineral tablets-
- Acquire sample − In this step, the sample that is multiple-vitamin and mineral tablet will be collected.
- Preparation of laboratory sample − In this step, the sample will be prepared by grinding the multiple-vitamin and mineral tablets which are then transferred to the small container and weight of the prepared sample will be calculated.
- Dissolve sample − In this step, the prepared sample will be heated with the solution of hydrochloric acid.
- Changing of chemical formula − In this step, the pH level of the solution will be maintained by the addition of the measured quantity of potassium thiocynate.
- Eliminate interferences − In this step, solution insoluble particle or residues are filtered off from the sample solution and then the small part of the solution is transferred to the small container.
- Measurement of property − In this step, the absorbance of the solution will be determined by using the spectrophotometer instrument.
- Calculate results − In this step, the calibration curve will be drawn by using the iron standards and the concentration of unknown iron will be determined by using the least square analysis method.
- Estimate reliability −Finally the obtained results will be used for the calculation of the standard deviation and which helps in the estimation of 90-95% accuration level.
(c)
Interpretation:
The laboratory unit operation will be listed that will be used for determining glucose concentration in patient’s blood.
Concept introduction:
The sequential steps of unit operations which are used for the laboratory experiments which are helpful in the determination of the required and correct results.
Answer to Problem 33.1QAP
The unit operations which are used in the determination of the glucose concentration in patient’s blood proceeds as-
Acquire sample, Measurement of property, Calculation of results and Estimation of reliability
Explanation of Solution
The following steps will be used for the experiment in determining the glucose concentration in patient’s blood-
- Acquire sample − In this step, the patient’s blood sample will be collected.
- Preparation of laboratory sample − This step is not required as there is no requirement for the formation of blood sample separately.
- Dissolve sample − This step is also not required.
- Changing of chemical formula − This step is also not required because there is no requirement to change the chemical formula of the blood.
- Eliminate interferences − This step is also not required.
- Measurement of property − In this step, immobilized enzyme strip is required on which the drop of patient’s blood will be transferred and with the help of glucose meter, the level of glucose will be counted.
- Calculate results − In this step, the level of glucose in the patient blood will be counted by using the glucose meter.
- Estimate reliability −Finally, the estimated reliability of the results is obtained by generating the replicated results.
Want to see more full solutions like this?
- Sodium hydroxide solution was standardized against one gram of potassium phthalate. First trial used 52.0 mL of the solution while the second trial used 52.4 of the solution to reach the end point. (a) What is the standardized concentration of the solution? (b) If the task is to prepare a one tenth of a molar solution, what is the percent accuracy of the preparation?arrow_forwardWhich of the following given statements is true? * Dissolved oxygen in large bodies of water may be from the waste product of photosynthesis from algae, seaweed, and other aquatic plants. The normality (N) of a solution is determined by multiplying the molarity of the solution by its volume. In the Winkler Titration Method, the endpoint is determined by the visual indicator, methyl violet. All given statements are false.arrow_forwardA 45.40% ferric oxide needed 0.7519 gram of an impure sample of iron ore. The analyte then required 38.50 ml of potassium permanganate solution to oxidize the ferrous ions. [As= 74.92, Fe=55.85, Mn=54.94, K=39.10]. What is the Normality of the permanganate solution?arrow_forward
- A total of 31.3 ml of 0.15 N NaOH was required to reach a phenolphthalein endpoint in titrating 6.00 g vinegar. Calculate the number of equivalents of acetic acid in vinegar. Calculate the number of grams of acetic acid present in the vinegar. Calculate the percent by weight of acetic acid in vinegar.arrow_forward(a) Which of the following compounds is/are soluble in water at room temperature?(i) Magnesium carbonate(ii) Strontium nitrate(iii) Potassium iodide(iv) Iron hydroxide(b) When an aqueous solution of sodium hydroxide is added to an aqueous solution ofiron(III) nitrate, a red/brown gelatinous solid is formed. Write a balanced molecularequation for the reaction that is taking place. Now rewrite your equation in net ionicform.arrow_forwardSodium hydroxide solution was standardized against one gram of potassium phthalate. First trial used 52.0 ml of the solution while the second trial used 52.4 of the solution to reach the end point. (a) What is the standardized concentration of the solution? (b) If the task is to prepare a one tenth of a molar solution, what is the percent accuracy of the preparation? The standardized basic solution was then used in getting the total acidity of a food sample. Ten milliliter of the acidic sample consumed 10.3mL in the first trial then 10.0mL in the second trial to reach endpoint. (c) What is the normality of the acidic sample? Compute the total acidity of the food sample assuming that ten grams of sample was dissolved to 25ml of solution if the sample is: (d) Milk (MW, lactic acid =90) (e) Juice (MW, citric acid = 192.4; one mole citric acid reacts with three moles NaOH) (f) Vinegar (MW, acetic acid = 60) If you are a food safety inspector, would the sample pass if (include reason) (g)…arrow_forward
- Sodium hydroxide solution was standardized against one gram of potassium phthalate. First trial used 52.0 ml of the solution while the second trial used 52.4 of the solution to reach the end point. (a) What is the standardized concentration of the solution? (b) If the task is to prepare a one tenth of a molar solution, what is the percent accuracy of the preparation? The standardized basic solution was then used in getting the total acidity of a food sample. Ten milliliter of the acidic sample consumed 10.3mL in the first trial then 10.0ml in the second trial to reach endpoint. (c) What is the normality of the acidic sample? Compute the total acidity of the food sample assuming that ten grams of sample was dissolved to 25mL of solution if the sample is: (d) Milk (MW, lactic acid -90) (e) Juice (MW, citric acid = 192.4; one mole citric acid reacts with three moles NaOH) (f) Vinegar (MW, acetic acid- 60) If you are a food safety inspector, would the sample pass if (include reason) (R)…arrow_forwardHow do we solve this with dimensional analysis?arrow_forward6. 100.0 mL of a silver nitrate solution is added to 98.75 g of a water sample. The density of this water sample is 1.01 g/mL. After filtering, washing, and drying the precipitate, you have 1.9482 g of silver chloride. You may assume that all chloride was present as sodium chloride. What is the salinity of this water sample expressed as; (a) weight percent (b) parts per thousand (c) molarityarrow_forward
- Twenty tablets (labelled 300 mg aspirin per tablet) had a total mass of 6.9117 g. The tablets were powdered and 0.5423 g of powder was added to 30.0 mL 0.494 M sodium hydroxide solution and the mixture boiled gently for 10 minutes. The excess alkali in the cooled solution was titrated with 0.475 M hydrochloric acid solution and 20.25 mL required for neutralization. Given that aspirin (C9H8O4) and NaOH react in a 1:2 ratio calculate the percentage of aspirin as compared to the labelled claim. Aspirin Mr(C9H8O4) = 180.2arrow_forwardAfter studying the separation scheme for Group III cations and using your background knowledge on separation of Group I and Group II cations: (a) devise a flow chart or schematic diagram to separate and confirm the presence of the given ions in the solution below; (b) write the chemical formula of the precipitates formed; and (c) provide a brief explanation about your schematic diagram.arrow_forwardPhenobarbital was introduced in 1912 for the treatment of epilepsy. It is an anti-convulsant and sedative-hypnotic drug and used to control seizures. The measurement of phenobarbital is by fluorescence method. A 5.00 mL aliquots of an unknown containing phenobarbital were delivered to 50.00 mL volumetric flasks. The following volumes of a standard solution of phenobarbital, 2.00ug/mL, were then introduced to the volumetric flasks before diluting to volume with the corresponding signals on a fluorometer equipment. Find the concentration of phenobarbital in the original unknown sample.arrow_forward
- Introductory Chemistry: An Active Learning Approa...ChemistryISBN:9781305079250Author:Mark S. Cracolice, Ed PetersPublisher:Cengage LearningIntroductory Chemistry: A FoundationChemistryISBN:9781337399425Author:Steven S. Zumdahl, Donald J. DeCostePublisher:Cengage LearningGeneral, Organic, and Biological ChemistryChemistryISBN:9781285853918Author:H. Stephen StokerPublisher:Cengage Learning
- Chemistry: The Molecular ScienceChemistryISBN:9781285199047Author:John W. Moore, Conrad L. StanitskiPublisher:Cengage LearningWorld of Chemistry, 3rd editionChemistryISBN:9781133109655Author:Steven S. Zumdahl, Susan L. Zumdahl, Donald J. DeCostePublisher:Brooks / Cole / Cengage Learning