COST ACCOUNTING PLUS NEW MYACCOUNTING L
16th Edition
ISBN: 9780134476353
Author: Horngren
Publisher: PEARSON
expand_more
expand_more
format_list_bulleted
Concept explainers
Textbook Question
Chapter 4, Problem 4.35E
Proration of
Budgeted manufacturing overhead cost | $25,000 |
Budgeted direct manufacturing labor cost | $250,000 |
Actual manufacturing overhead cost | $117,000 |
Actual direct manufacturing labor cost | $228,000 |
Inventory balances on December 31, 2017, were as follows:
Account | Ending balance | 2017 direct manufacturing labor cost in ending balance |
Work in process | $50,700 | $20,520 |
Finished goods | 245,050 | 59,280 |
Cost of goods sold | 549,250 | 148,200 |
- 1. Calculate the manufacturing overhead allocation rate.
Required
- 2. Compute the amount of under- or overallocated manufacturing overhead.
- 3. Calculate the ending balances in work in process, finished goods, and cost of goods sold if under- or overallocated manufacturing overhead is as follows:
- a. Written off to cost of goods sold
- b. Prorated based on ending balances (before proration) in each of the three accounts
- c. Prorated based on the overhead allocated in 2017 in the ending balances (before proration) in each of the three accounts
- 4. Which method would you choose? Justify your answer.
Expert Solution & Answer
Learn your wayIncludes step-by-step video
schedule08:00
Students have asked these similar questions
ARKANSAS CORPORATION
…… is a company that produces machinery to customer order. Its job costing system, using normal costing, has two direct cost categories, direct materials and direct labor, and one indirect cost pool, manufacturing overhead, allocated using a budgeted rate based on direct labor costs. Budgeted and actual information for 2016 are as follows:
Budget
Actual
Direct Labor
$420,000
$400,000
Manufacturing overhead
$252,000
$186,840
At the end of 2016, the ending work in process consisted of:
Ending Work In Process:
Direct Materials
$64,000
Direct Labor
50,000
Overhead
30,000
$144,000
There were no beginning work-in-process or finished-goods inventories. Ending Finished Goods showed a balance of $156,000, which included overhead costs of $25,200.
Cost of goods sold was $1,600,000, of which $184,800 consisted of applied overhead.…
Donna Corporation manufactures custom cabinets for kitchens. It uses a normalcosting system with two direct-cost categories—direct materials and direct manufacturing labor—and one indirect-cost pool, manufacturing overhead costs. It providesthe following information about manufacturing overhead costs for 2017.Budgeted manufacturing overhead costs $960,000Budgeted direct manufacturing labor-hours 32,000 hoursActual manufacturing overhead costs $992,000Actual direct manufacturing labor-hours 31,000 hoursThe following information is available as of December 31, 2017.AccountAccount Balance(Before Proration)Manufacturing Overhead in EachAccount Balance Allocated in theCurrent Year (Before Proration)Work-in-Process Control $ 40,000 $ 14,400Finished Goods Control 60,000 24,000Cost of Goods Sold 1,900,000 921,600$2,000,000 $960,000Calculate the underallocated or overallocated manufacturing overhead at the end of 2017and prorate it to Work-in-Process Control, Finished Goods Control, and Cost of…
Thomas is a cost accountant and business analyst for Dashing Design Company (DDC), which manufactures expensive brass doorknobs. DDC uses two direct-cost categories: direct materials and direct manufacturing labor. Thomas feels that manufacturing overhead is most closely related to material usage. Therefore, DDC allocates manufacturing overhead to production based upon pounds of materials used.
At the beginning of 2017, DDC budgeted annual production of 400,000 doorknobs and adopted the following standards for each doorknob:
Input
Cost/Doorknob
Direct materials (brass)
0.3 lb. @ $11/lb.
$3.30
Direct manufacturing labor
1.2 hours @ $15/hour
18.00
Variable manufacturing overhead
$6/lb x 0.3 lb.
1.80
Fixed manufacturing overhead
$14/lb. x 0.3 lb.
4.20
Standard cost per doorknob
$27.30
Actual results for April 2017 were as follows:
Production
31,000 doorknobs
Direct materials purchased
12,700 lb. at $12/lb.…
Chapter 4 Solutions
COST ACCOUNTING PLUS NEW MYACCOUNTING L
Ch. 4 - Define cost pool, cost tracing, cost allocation,...Ch. 4 - How does a job-costing system differ from a...Ch. 4 - Why might an advertising agency use job costing...Ch. 4 - Describe the seven steps in job costing.Ch. 4 - Give examples of two cost objects in companies...Ch. 4 - Describe three major source documents used in...Ch. 4 - What is the advantage of using computerized source...Ch. 4 - Give two reasons why most organizations use an...Ch. 4 - Distinguish between actual costing and normal...Ch. 4 - Describe two ways in which a house-construction...
Ch. 4 - Comment on the following statement: In a...Ch. 4 - Describe three different debit entries to the...Ch. 4 - Describe three alternative ways to dispose of...Ch. 4 - When might a company use budgeted costs rather...Ch. 4 - Prob. 4.15QCh. 4 - Which of the following does not accurately...Ch. 4 - Sturdy Manufacturing Co. assembled the following...Ch. 4 - For which of the following industries would...Ch. 4 - ABC Company uses job-order costing and has...Ch. 4 - Under Stanford Corporations job costing system,...Ch. 4 - (10 min) Job costing, process costing. In each of...Ch. 4 - Actual costing, normal costing, accounting for...Ch. 4 - Job costing, normal and actual costing. Atkinson...Ch. 4 - Budgeted manufacturing overhead rate, allocated...Ch. 4 - Job costing, accounting for manufacturing...Ch. 4 - Job costing, consulting firm. Frontier Partners, a...Ch. 4 - Time period used to compute indirect cost rates....Ch. 4 - Accounting for manufacturing overhead. Creative...Ch. 4 - Job costing, journal entries. The University of...Ch. 4 - Journal entries, T-accounts, and source documents....Ch. 4 - Job costing, journal entries. Donald Transport...Ch. 4 - Job costing, unit cost, ending work in process....Ch. 4 - Job costing; actual, normal, and variation from...Ch. 4 - Job costing; variation on actual, normal, and...Ch. 4 - Proration of overhead. The Ride-On-Wave Company...Ch. 4 - Job costing, accounting for manufacturing...Ch. 4 - Service industry, job costing, law firm. Kidman ...Ch. 4 - Service industry, job costing, two direct- and two...Ch. 4 - Proration of overhead. (Z. Iqbal, adapted) The Zaf...Ch. 4 - Normal costing, overhead allocation, working...Ch. 4 - Proration of overhead with two indirect cost...Ch. 4 - General ledger relationships, under- and...Ch. 4 - Overview of general ledger relationships. Estevez...Ch. 4 - Allocation and proration of overhead. Resource...Ch. 4 - (2530 min.) Job costing, ethics. Joseph Underwood...Ch. 4 - Job costingservice industry. Market Pulse performs...
Additional Business Textbook Solutions
Find more solutions based on key concepts
What is the biggest advantage of using RI to evaluate investment centers?
Horngren's Financial & Managerial Accounting, The Managerial Chapters (6th Edition)
Analyze manufacturing overhead (Learning Objectives 3 5) Smith Foundry in Columbus, Ohio, uses a predetermined...
Managerial Accounting (5th Edition)
Would treasury stock be considered authorized, issued, or outstanding? Explain your answer.
Financial Accounting
Horizontal analysis(Learning Objective 2)15-20 min. Below are net sales and net income data for a five-year per...
Financial Accounting, Student Value Edition (4th Edition)
A piece of equipment is purchased for $40,000 and has an estimated salvage value of $1,000 at the end of the re...
Construction Accounting And Financial Management (4th Edition)
Small Business Analysis Purpose: To help you understand the importance of cash flows in the operation of a smal...
Financial Accounting, Student Value Edition (5th Edition)
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, accounting and related others by exploring similar questions and additional content below.Similar questions
- For E2-17, prepare any journal entries that would have been different if the only trigger points had been the purchase of materials and the sale of finished goods. Davis Co. uses backflush costing to account for its manufacturing costs. The trigger points are the purchase of materials, the completion of goods, and the sale of goods. Prepare journal entries to account for the following: a. Purchased raw materials, on account, 70,000. b. Requisitioned raw materials to production, 70,000. c. Distributed direct labor costs, 15,000. d. Factory overhead costs incurred, 45,000. (Use Various Credits for the account in the credit part of the entry.) e. Completed all of the production started. f. Sold the completed production for 195,000, on account. (Hint: Use a single account for raw materials and work in process.)arrow_forwardJoyT Company manufactures Maxi Dolls for sale in toy stores. In planning for this year, JoyT estimated variable factory overhead of 600,000 and fixed factory overhead of 400,000. JoyT uses a standard costing system, and factory overhead is allocated to units produced using standard direct labor hours. The level of activity budgeted for this year was 10,000 direct labor hours, and JoyT used 10,300 actual direct labor hours. Based on the output accomplished during this year, 9,900 standard direct labor hours should have been used. Actual variable factory overhead was 596,000, and actual fixed factory overhead was 410,000 for the year. Based on this information, the variable factory overhead controllable variance for JoyT for this year was: a. 24,000 unfavorable. b. 2,000 unfavorable. c. 4,000 favorable. d. 22,000 favorable.arrow_forwardHandbrain Inc. is considering a change to activity-based product costing. The company produces two products, cell phones and tablet PCs, in a single production department. The production department is estimated to require 2,000 direct labor hours. The total indirect labor is budgeted to be 200,000. Time records from indirect labor employees revealed that they spent 30% of their time setting up production runs and 70% of their time supporting actual production. The following information about cell phones and tablet PCs was determined from the corporate records: a. Determine the indirect labor cost per unit allocated to cell phones and tablet PCs under a single plantwide factory overhead rate system using the direct labor hours as the allocation base. b. Determine the budgeted activity costs and activity rates for the indirect labor under activity-based costing. Assume two activitiesone for setup and the other for production support. c. Determine the activity cost per unit for indirect labor allocated to each product under activity-based costing. d. Why are the per-unit allocated costs in (a) different from the per-unit activity cost assigned to the products in (c)?arrow_forward
- Brees, Inc., a manufacturer of golf carts, has just received an offer from a supplier to provide 2,600 units of a component used in its main product. The component is a track assembly that is currently produced internally. The supplier has offered to sell the track assembly for 66 per unit. Brees is currently using a traditional, unit-based costing system that assigns overhead to jobs on the basis of direct labor hours. The estimated traditional full cost of producing the track assembly is as follows: Prior to making a decision, the companys CEO commissioned a special study to see whether there would be any decrease in the fixed overhead costs. The results of the study revealed the following: 3 setups1,160 each (The setups would be avoided, and total spending could be reduced by 1,160 per setup.) One half-time inspector is needed. The company already uses part-time inspectors hired through a temporary employment agency. The yearly cost of the part-time inspectors for the track assembly operation is 12,300 and could be totally avoided if the part were purchased. Engineering work: 470 hours, 45/hour. (Although the work decreases by 470 hours, the engineer assigned to the track assembly line also spends time on other products, and there would be no reduction in his salary.) 75 fewer material moves at 30 per move. Required: 1. Ignore the special study, and determine whether the track assembly should be produced internally or purchased from the supplier. 2. Now, using the special study data, repeat the analysis. 3. Discuss the qualitative factors that would affect the decision, including strategic implications. 4. After reviewing the special study, the controller made the following remark: This study ignores the additional activity demands that purchasing would cause. For example, although the demand for inspecting the part on the production floor decreases, we may need to inspect the incoming parts in the receiving area. Will we actually save any inspection costs? Is the controller right?arrow_forwardSmokeCity, Inc., manufactures barbeque smokers. Based on past experience, SmokeCity has found that its total annual overhead costs can be represented by the following formula: Overhead cost = 543,000 + 1.34X, where X equals number of smokers. Last year, SmokeCity produced 20,000 smokers. Actual overhead costs for the year were as expected. Required: 1. What is the driver for the overhead activity? 2. What is the total overhead cost incurred by SmokeCity last year? 3. What is the total fixed overhead cost incurred by SmokeCity last year? 4. What is the total variable overhead cost incurred by SmokeCity last year? 5. What is the overhead cost per unit produced? 6. What is the fixed overhead cost per unit? 7. What is the variable overhead cost per unit? 8. Recalculate Requirements 5, 6, and 7 for the following levels of production: (a) 19,500 units and (b) 21,600 units. (Round your answers to the nearest cent.) Explain this outcome.arrow_forwardDouglas Davis, controller for Marston, Inc., prepared the following budget for manufacturing costs at two different levels of activity for 20X1: During 20X1, Marston worked a total of 80,000 direct labor hours, used 250,000 machine hours, made 32,000 moves, and performed 120 batch inspections. The following actual costs were incurred: Marston applies overhead using rates based on direct labor hours, machine hours, number of moves, and number of batches. The second level of activity (the right column in the preceding table) is the practical level of activity (the available activity for resources acquired in advance of usage) and is used to compute predetermined overhead pool rates. Required: 1. Prepare a performance report for Marstons manufacturing costs in the current year. 2. Assume that one of the products produced by Marston is budgeted to use 10,000 direct labor hours, 15,000 machine hours, and 500 moves and will be produced in five batches. A total of 10,000 units will be produced during the year. Calculate the budgeted unit manufacturing cost. 3. One of Marstons managers said the following: Budgeting at the activity level makes a lot of sense. It really helps us manage costs better. But the previous budget really needs to provide more detailed information. For example, I know that the moving materials activity involves the use of forklifts and operators, and this information is lost when only the total cost of the activity for various levels of output is reported. We have four forklifts, each capable of providing 10,000 moves per year. We lease these forklifts for five years, at 10,000 per year. Furthermore, for our two shifts, we need up to eight operators if we run all four forklifts. Each operator is paid a salary of 30,000 per year. Also, I know that fuel costs about 0.25 per move. Assuming that these are the only three items, expand the detail of the flexible budget for moving materials to reveal the cost of these three resource items for 20,000 moves and 40,000 moves, respectively. Based on these comments, explain how this additional information can help Marston better manage its costs. (Especially consider how activity-based budgeting may provide useful information for non-value-added activities.)arrow_forward
- Minor Co. has a job order cost system and applies overhead based on departmental rates. Service Department 1 has total budgeted costs of 168,000 for next year. Service Department 2 has total budgeted costs of 280,000 for next year. Minor allocates service department costs solely to the producing departments. Service Department 1 cost is allocated to producing departments on the basis of machine hours. Service Department 2 cost is allocated to producing departments on the basis of direct labor hours. Producing Department 1 has budgeted 8,000 machine hours and 12,000 direct labor hours. Producing Department 2 has budgeted 2,000 machine hours and 12,000 direct labor hours. What is the total cost allocation from the two service departments to Producing Department 1? a. 173,600 b. 140,000 c. 134,400 d. 274,400arrow_forwardCompute the total job cost for each of the following scenarios: a. If the direct labor cost method is used in applying factory overhead and the predetermined rate is 100%, what amount should be charged to Job 2010 for factory overhead? Assume that direct materials used totaled 5,000 and that the direct labor cost totaled 3,200. b. If the direct labor hour method is used in applying factory overhead and the predetermined rate is 10 an hour, what amount should be charged to Job 2010 for factory overhead? Assume that the direct materials used totaled 5,000, the direct labor cost totaled 3,200, and the number of direct labor hours totaled 250. c. If the machine hour method is used in applying factory overhead and the predetermined rate is 12.50 an hour, what amount should be charged to Job 2010 for factory overhead? Assume that the direct materials used totaled 5,000, the direct labor cost totaled 3,200, the direct labor hours were 250 hours, and the machine hours were 295 hours.arrow_forwardUse the following information for Exercises 9-63 and 9-64: Palladium Inc. produces a variety of household cleaning products. Palladiums controller has developed standard costs for the following four overhead items: Next year, Palladium expects production to require 90,000 direct labor hours. Exercise 9-64 Performance Report Based on Actual Production Refer to the information for Palladium Inc. above. Assume that actual production required 93,000 direct labor hours at standard. The actual overhead costs incurred were as follows: Required: Prepare a performance report for the period based on actual production.arrow_forward
- Young Company is beginning operations and is considering three alternatives to allocate manufacturing overhead to individual units produced. Young can use a plantwide rate, departmental rates, or activity-based costing. Young will produce many types of products in its single plant, and not all products will be processed through all departments. In which one of the following independent situations would reported net income for the first year be the same regardless of which overhead allocation method had been selected? a. All production costs approach those costs that were budgeted. b. The sales mix does not vary from the mix that was budgeted. c. All manufacturing overhead is a fixed cost. d. All ending inventory balances are zero.arrow_forwardGeneva, Inc., makes two products, X and Y, that require allocation of indirect manufacturing costs. The following data were compiled by the accountants before making any allocations: The total cost of purchasing and receiving parts used in manufacturing is 60,000. The company uses a job-costing system with a single indirect cost rate. Under this system, allocated costs were 48,000 and 12,000 for X and Y, respectively. If an activity-based system is used, what would be the allocated costs for each product?arrow_forwardMott Company recently implemented a JIT manufacturing system. After one year of operation, Heidi Burrows, president of the company, wanted to compare product cost under the JIT system with product cost under the old system. Motts two products are weed eaters and lawn edgers. The unit prime costs under the old system are as follows: Under the old manufacturing system, the company operated three service centers and two production departments. Overhead was applied using departmental overhead rates. The direct overhead costs associated with each department for the year preceding the installation of JIT are as follows: Under the old system, the overhead costs of the service departments were allocated directly to the producing departments and then to the products passing through them. (Both products passed through each producing department.) The overhead rate for the Machining Department was based on machine hours, and the overhead rate for assembly was based on direct labor hours. During the last year of operations for the old system, the Machining Department used 80,000 machine hours, and the Assembly Department used 20,000 direct labor hours. Each weed eater required 1.0 machine hour in Machining and 0.25 direct labor hour in Assembly. Each lawn edger required 2.0 machine hours in Machining and 0.5 hour in Assembly. Bases for allocation of the service costs are as follows: Upon implementing JIT, a manufacturing cell for each product was created to replace the departmental structure. Each cell occupied 40,000 square feet. Maintenance and materials handling were both decentralized to the cell level. Essentially, cell workers were trained to operate the machines in each cell, assemble the components, maintain the machines, and move the partially completed units from one point to the next within the cell. During the first year of the JIT system, the company produced and sold 20,000 weed eaters and 30,000 lawn edgers. This output was identical to that for the last year of operations under the old system. The following costs have been assigned to the manufacturing cells: Required: 1. Compute the unit cost for each product under the old manufacturing system. 2. Compute the unit cost for each product under the JIT system. 3. Which of the unit costs is more accurate? Explain. Include in your explanation a discussion of how the computational approaches differ. 4. Calculate the decrease in overhead costs under JIT, and provide some possible reasons that explain the decrease.arrow_forward
arrow_back_ios
SEE MORE QUESTIONS
arrow_forward_ios
Recommended textbooks for you
- Financial And Managerial AccountingAccountingISBN:9781337902663Author:WARREN, Carl S.Publisher:Cengage Learning,Managerial AccountingAccountingISBN:9781337912020Author:Carl Warren, Ph.d. Cma William B. TaylerPublisher:South-Western College PubCornerstones of Cost Management (Cornerstones Ser...AccountingISBN:9781305970663Author:Don R. Hansen, Maryanne M. MowenPublisher:Cengage Learning
- Principles of Cost AccountingAccountingISBN:9781305087408Author:Edward J. Vanderbeck, Maria R. MitchellPublisher:Cengage LearningManagerial Accounting: The Cornerstone of Busines...AccountingISBN:9781337115773Author:Maryanne M. Mowen, Don R. Hansen, Dan L. HeitgerPublisher:Cengage Learning
Financial And Managerial Accounting
Accounting
ISBN:9781337902663
Author:WARREN, Carl S.
Publisher:Cengage Learning,
Managerial Accounting
Accounting
ISBN:9781337912020
Author:Carl Warren, Ph.d. Cma William B. Tayler
Publisher:South-Western College Pub
Cornerstones of Cost Management (Cornerstones Ser...
Accounting
ISBN:9781305970663
Author:Don R. Hansen, Maryanne M. Mowen
Publisher:Cengage Learning
Principles of Cost Accounting
Accounting
ISBN:9781305087408
Author:Edward J. Vanderbeck, Maria R. Mitchell
Publisher:Cengage Learning
Managerial Accounting: The Cornerstone of Busines...
Accounting
ISBN:9781337115773
Author:Maryanne M. Mowen, Don R. Hansen, Dan L. Heitger
Publisher:Cengage Learning
Cost Accounting - Definition, Purpose, Types, How it Works?; Author: WallStreetMojo;https://www.youtube.com/watch?v=AwrwUf8vYEY;License: Standard YouTube License, CC-BY