Thermodynamics: An Engineering Approach
Thermodynamics: An Engineering Approach
8th Edition
ISBN: 9780073398174
Author: Yunus A. Cengel Dr., Michael A. Boles
Publisher: McGraw-Hill Education
bartleby

Videos

Textbook Question
Book Icon
Chapter 9.12, Problem 164RP

Consider a simple ideal Brayton cycle with air as the working fluid. The pressure ratio of the cycle is 6, and the minimum and maximum temperatures are 300 and 1300 K, respectively. Now the pressure ratio is doubled without changing the minimum and maximum temperatures in the cycle. Determine the change in (a) the net work output per unit mass and (b) the thermal efficiency of the cycle as a result of this modification. Assume variable specific heats for air.

a)

Expert Solution
Check Mark
To determine

The change in net work output per unit mass.

Answer to Problem 164RP

The change in net work output per unit mass is 41.5 kJ/kg.

Explanation of Solution

Draw the Ts diagram for the simple Brayton cycle as shown in Figure (1).

Thermodynamics: An Engineering Approach, Chapter 9.12, Problem 164RP

Write the expression for the pressure ratio in terms of relative pressure to calculate the relative pressure at state 2 (Pr2).

P2P1=Pr2Pr1rp=Pr2Pr1 (I)

Here, compressor inlet pressure is P1, compressor exit pressure is P2, the relative pressure at state 1 is Pr1, and relative pressure at state 2 is Pr2.

Write the expression for the pressure ratio in terms of relative pressure to calculate the relative pressure at state 4 (Pr4).

P4P3=Pr4Pr31rp=Pr4Pr3 (II)

Here, compressor inlet pressure is P1, compressor exit pressure is P2, the relative pressure at state 3 is Pr3, and relative pressure at state 4 is Pr4.

Write the expression for the heat added (qin) in the combustion chamber.

qin=h3h2=cp(T3T2) (III)

Here, specific enthalpy of air from the exit of compressor is h2, specific enthalpy of air from the exit of the combustion chamber is h3.

Write the expression for the heat rejected (qout) to atmosphere.

qout=h4h1=cp(T4T1) (IV)

Here, specific enthalpy of air at the exit of the turbine is h4 and specific enthalpy of air at the inlet to the compressor is h1.

Write the expression for net work done (wnet) per unit mass when the pressure ratio is 6.

wnet=qinqout (V)

Write the expression for net work done (w'net) per unit mass when the pressure ratio is 12.

w'net=qinqout (VI)

Write the expression for the thermal efficiency (ηth) of the system when the pressure ratio is 6.

ηth=wnetqin (VII)

Write the expression for the thermal efficiency (η'th) of the system when the pressure ratio is 12.

η'th=w'netqin (VIII)

Write the expression for change in the net work (Δwnet) output per unit mass of the cycle.

Δwnet=w'netwnet (IX)

Here, net work done for the initial cycle is wnet and net work done for the newer cycle is w'net.

Conclusion:

For relative pressure (rp) is 6.

From the Table A-17, “Ideal-gas properties of air” obtain the following properties at temperature (T1) of 300 K.

h1=300.19 kJ/kgPr1=1.386

From the Table A-17, “Ideal-gas properties of air” obtain the following properties at temperature (T1) of 1300 K.

h3=1395.97 kJ/kgPr3=330.9

Substitute 1.386 for Pr1 and 6 for rp in Equation (I).

6=Pr21.386Pr2=8.316

Substitute 330.9 for Pr1 and 6 for rp in Equation (II).

16=Pr4330.9Pr4=55.15

From the Table A-17, “Ideal-gas properties of air”.

Obtain the value of enthalpy at state 2 (h2) at the relative pressure at state 2 (Pr2) of 8.316 by using interpolation method.

Write the formula of interpolation method of two variables.

y2=(x2x1)(y3y1)(x3x1)+y1 (X)

Here, the variables denoted by x and y are relative pressure and enthalpy.

Show relative pressure and enthalpy values from the Table A-17.

Relative pressure (Pr2)Enthalpy (h2), in kJ/kg
7.824492.74
8.316?
8.411503.02

Substitute 7.824 for x1, 8.316 for x2, 8.411 for x3, 492.74 for y1, and 503.02 for y3 in Equation (X).

y2=(8.3167.824)(503.02492.74)(8.4117.824)+492.74=501.4

The value of enthalpy at state 2 (h2) at the relative pressure (Pr2) of 8.316 is 501.4kJ/kg.

Similarly by using interpolation method obtain the value of enthalpy at state 4 (h4) at the relative pressure (Pr2) of 55.15 as 855.3kJ/kg.

Substitute 1395.97kJ/kg for h3 and 501.4kJ/kg for h2 in Equation (III).

qin=1395.97kJ/kg501.4kJ/kg=894.97 kJ/kg

Substitute 855.3kJ/kg for h4 and 300.19kJ/kg for h1 in Equation (IV).

qout=855.3kJ/kg300.19kJ/kg=555.11 kJ/kg

Substitute 555.11 kJ/kg for qout and 894.97 kJ/kg for qin in Equation (V).

wnet=894.97 kJ/kg555.11 kJ/kg=339.46 kJ/kg

Substitute 339.46 kJ/kg for wnet and 894.97 kJ/kg for qin in Equation (VII).

ηth=339.46 kJ/kg894.97 kJ/kg=0.379×100%=37.9%

For relative pressure (rp) is 12.

Substitute 1.386 for Pr1 and 12 for rp in Equation (I).

12=Pr21.386Pr2=16.63

From the Table A-17, “Ideal-gas properties of air” obtain the values of enthalpy (h2) at the relative pressure (Pr2) of 16.63 as 610.6 kJ/kg by interpolation method as shown in Equation (I).

Substitute 330.9 for Pr1 and 12 for rp in Equation (II).

112=Pr4330.9Pr4=27.58

From the Table A-17, “Ideal-gas properties of air” obtain the values of enthalpy (h4) at the relative pressure (Pr4) of 25.575 as 704.6 kJ/kg by interpolation method as shown in Equation (I).

Substitute 1395.97kJ/kg for h3 and 610.6 kJ/kg for h2 in Equation (III).

qin=1395.97kJ/kg610.6 kJ/kg=785.37kJ/kg

Substitute 704.6 kJ/kg for h4 and 300.19kJ/kg for h1 in Equation (IV).

qout=704.6 kJ/kg300.19kJ/kg=404.41kJ/kg

Substitute 404.41kJ/kg for qout and 785.37kJ/kg for qin in Equation (VI).

w'net=404.41kJ/kg785.37kJ/kg=380.96kJ/kg

Substitute 380.96kJ/kg for w'net and 785.37kJ/kg for qin in Equation (VIII).

η'th=339.46 kJ/kg785.37kJ/kg=0.485×100%=48.5%

Substitute 380.96kJ/kg for w'net and 339.46 kJ/kg for wnet in Equation (IX).

Δwnet=380.96kJ/kg339.46 kJ/kg=41.5 kJ/kg

Thus, the change in net work output per unit mass is 41.5 kJ/kg.

b)

Expert Solution
Check Mark
To determine

The change in thermal efficiency of the cycle.

Answer to Problem 164RP

The change in thermal efficiency of the cycle is 10.6%.

Explanation of Solution

Write the expression to calculate the change in thermal efficiency Δηth.

Δηth=ηthηth (XI)

Conclusion:

Substitute 48.5% for ηth and 37.9% for ηth in Equation (XI).

Δηth=48.5%37.9%=10.6%

Thus, the change in thermal efficiency of the cycle is 10.6%.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
For fixed maximum and minimum temperatures, what is the effect of the pressure ratio on the net work output of a simple ideal Brayton cycle?
Consider an ideal gas-turbine cycle with two stages of compression and two stages of expansion. The pressure ratio across each stage of the compressor and turbine is 3. The air enters each stage of the compressor at 300 K and each stage of the turbine at 1200 K. Determine the back work ratio and the thermal efficiency of the cycle, assuming no regenerator is used.
Air is used as the working fluid in a simple ideal Brayton cycle that has a pressure ratio of 12, a compressor inlet temperature of 300 K, and a turbine inlet temperature of 1000 K. Determine the required mass flow rate of air for a net power output of 70 MW, assuming both the compressor and the turbine have an isentropic efficiency of 85 percent. Assume constant specific heats at room temperature.

Chapter 9 Solutions

Thermodynamics: An Engineering Approach

Ch. 9.12 - Prob. 11PCh. 9.12 - Prob. 12PCh. 9.12 - Prob. 13PCh. 9.12 - Prob. 15PCh. 9.12 - Prob. 16PCh. 9.12 - Prob. 17PCh. 9.12 - Prob. 18PCh. 9.12 - Repeat Prob. 919 using helium as the working...Ch. 9.12 - Consider a Carnot cycle executed in a closed...Ch. 9.12 - Prob. 21PCh. 9.12 - Prob. 22PCh. 9.12 - What four processes make up the ideal Otto cycle?Ch. 9.12 - Are the processes that make up the Otto cycle...Ch. 9.12 - How do the efficiencies of the ideal Otto cycle...Ch. 9.12 - How does the thermal efficiency of an ideal Otto...Ch. 9.12 - Prob. 27PCh. 9.12 - Why are high compression ratios not used in...Ch. 9.12 - An ideal Otto cycle with a specified compression...Ch. 9.12 - Prob. 30PCh. 9.12 - Prob. 31PCh. 9.12 - Prob. 32PCh. 9.12 - An ideal Otto cycle has a compression ratio of 8....Ch. 9.12 - Prob. 35PCh. 9.12 - Prob. 36PCh. 9.12 - Prob. 37PCh. 9.12 - An ideal Otto cycle with air as the working fluid...Ch. 9.12 - Repeat Prob. 940E using argon as the working...Ch. 9.12 - Prob. 40PCh. 9.12 - Prob. 41PCh. 9.12 - Prob. 42PCh. 9.12 - Prob. 43PCh. 9.12 - Prob. 44PCh. 9.12 - Prob. 45PCh. 9.12 - Prob. 46PCh. 9.12 - Prob. 47PCh. 9.12 - Prob. 48PCh. 9.12 - Prob. 49PCh. 9.12 - Prob. 50PCh. 9.12 - Prob. 51PCh. 9.12 - Prob. 52PCh. 9.12 - Prob. 53PCh. 9.12 - Prob. 54PCh. 9.12 - Repeat Prob. 957, but replace the isentropic...Ch. 9.12 - Prob. 57PCh. 9.12 - Prob. 58PCh. 9.12 - Prob. 59PCh. 9.12 - The compression ratio of an ideal dual cycle is...Ch. 9.12 - Repeat Prob. 962 using constant specific heats at...Ch. 9.12 - Prob. 63PCh. 9.12 - An air-standard cycle, called the dual cycle, with...Ch. 9.12 - Prob. 65PCh. 9.12 - Prob. 66PCh. 9.12 - Consider the ideal Otto, Stirling, and Carnot...Ch. 9.12 - Consider the ideal Diesel, Ericsson, and Carnot...Ch. 9.12 - An ideal Ericsson engine using helium as the...Ch. 9.12 - An ideal Stirling engine using helium as the...Ch. 9.12 - Prob. 71PCh. 9.12 - Prob. 72PCh. 9.12 - Prob. 73PCh. 9.12 - Prob. 74PCh. 9.12 - Prob. 75PCh. 9.12 - For fixed maximum and minimum temperatures, what...Ch. 9.12 - What is the back work ratio? What are typical back...Ch. 9.12 - Why are the back work ratios relatively high in...Ch. 9.12 - How do the inefficiencies of the turbine and the...Ch. 9.12 - A simple ideal Brayton cycle with air as the...Ch. 9.12 - A gas-turbine power plant operates on the simple...Ch. 9.12 - Prob. 82PCh. 9.12 - Prob. 83PCh. 9.12 - Prob. 85PCh. 9.12 - 9–86 Consider a simple Brayton cycle using air as...Ch. 9.12 - 9–87 Air is used as the working fluid in a simple...Ch. 9.12 - Air is used as the working fluid in a simple ideal...Ch. 9.12 - An aircraft engine operates on a simple ideal...Ch. 9.12 - 9–91E A gas-turbine power plant operates on a...Ch. 9.12 - Prob. 92PCh. 9.12 - 9–93 A gas-turbine power plant operates on the...Ch. 9.12 - A gas-turbine power plant operates on a modified...Ch. 9.12 - Prob. 95PCh. 9.12 - Prob. 96PCh. 9.12 - Prob. 97PCh. 9.12 - Prob. 98PCh. 9.12 - 9–99 A gas turbine for an automobile is designed...Ch. 9.12 - Prob. 100PCh. 9.12 - A gas-turbine engine operates on the ideal Brayton...Ch. 9.12 - An ideal regenerator (T3 = T5) is added to a...Ch. 9.12 - Prob. 103PCh. 9.12 - Prob. 104PCh. 9.12 - Prob. 106PCh. 9.12 - A Brayton cycle with regeneration using air as the...Ch. 9.12 - Prob. 108PCh. 9.12 - Prob. 109PCh. 9.12 - Prob. 110PCh. 9.12 - Prob. 111PCh. 9.12 - Prob. 112PCh. 9.12 - Prob. 113PCh. 9.12 - Prob. 114PCh. 9.12 - Prob. 115PCh. 9.12 - A simple ideal Brayton cycle without regeneration...Ch. 9.12 - A simple ideal Brayton cycle is modified to...Ch. 9.12 - Prob. 118PCh. 9.12 - Consider a regenerative gas-turbine power plant...Ch. 9.12 - Repeat Prob. 9123 using argon as the working...Ch. 9.12 - Consider an ideal gas-turbine cycle with two...Ch. 9.12 - Repeat Prob. 9125, assuming an efficiency of 86...Ch. 9.12 - Prob. 123PCh. 9.12 - Prob. 124PCh. 9.12 - Prob. 126PCh. 9.12 - Prob. 127PCh. 9.12 - Prob. 128PCh. 9.12 - Prob. 129PCh. 9.12 - A turbojet is flying with a velocity of 900 ft/s...Ch. 9.12 - Prob. 131PCh. 9.12 - A pure jet engine propels an aircraft at 240 m/s...Ch. 9.12 - A turbojet aircraft is flying with a velocity of...Ch. 9.12 - Prob. 134PCh. 9.12 - Consider an aircraft powered by a turbojet engine...Ch. 9.12 - 9–137 Air at 7°C enters a turbojet engine at a...Ch. 9.12 - Prob. 138PCh. 9.12 - Prob. 139PCh. 9.12 - 9–140E Determine the exergy destruction associated...Ch. 9.12 - Prob. 141PCh. 9.12 - Prob. 142PCh. 9.12 - Prob. 143PCh. 9.12 - Prob. 144PCh. 9.12 - Prob. 146PCh. 9.12 - A gas-turbine power plant operates on the...Ch. 9.12 - Prob. 149PCh. 9.12 - Prob. 150RPCh. 9.12 - Prob. 151RPCh. 9.12 - Prob. 152RPCh. 9.12 - Prob. 153RPCh. 9.12 - Prob. 154RPCh. 9.12 - Prob. 155RPCh. 9.12 - Prob. 156RPCh. 9.12 - Prob. 157RPCh. 9.12 - Prob. 159RPCh. 9.12 - Prob. 161RPCh. 9.12 - Prob. 162RPCh. 9.12 - Prob. 163RPCh. 9.12 - Consider a simple ideal Brayton cycle with air as...Ch. 9.12 - Prob. 165RPCh. 9.12 - Helium is used as the working fluid in a Brayton...Ch. 9.12 - Consider an ideal gas-turbine cycle with one stage...Ch. 9.12 - Prob. 169RPCh. 9.12 - Prob. 170RPCh. 9.12 - Prob. 173RPCh. 9.12 - Prob. 174RPCh. 9.12 - Prob. 184FEPCh. 9.12 - For specified limits for the maximum and minimum...Ch. 9.12 - Prob. 186FEPCh. 9.12 - Prob. 187FEPCh. 9.12 - Helium gas in an ideal Otto cycle is compressed...Ch. 9.12 - Prob. 189FEPCh. 9.12 - Prob. 190FEPCh. 9.12 - Consider an ideal Brayton cycle executed between...Ch. 9.12 - An ideal Brayton cycle has a net work output of...Ch. 9.12 - In an ideal Brayton cycle, air is compressed from...Ch. 9.12 - In an ideal Brayton cycle with regeneration, argon...Ch. 9.12 - In an ideal Brayton cycle with regeneration, air...Ch. 9.12 - Consider a gas turbine that has a pressure ratio...Ch. 9.12 - An ideal gas turbine cycle with many stages of...Ch. 9.12 - Prob. 198FEP
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Power Plant Explained | Working Principles; Author: RealPars;https://www.youtube.com/watch?v=HGVDu1z5YQ8;License: Standard YouTube License, CC-BY