Consider a fixed beam under uniformly distributed load 'w' as shown in the figure below:BGiven:wLwLRA = Rg =2'2wl?[counter – clockwise], MBwL?[clockwise]MA12a) Determine the expression of bending moment at any distance "x (0 < x < L)" from the support 'A'b) Determine the expressions for slope and deflection respectively

Consider a fixed beam under uniformly distributed load 'w' as shown in the figure below: w A B Given: wL wl RA =, Rg =7 %3D %3D 2' 2 [counter – clockwise], MB 12 wL? [clockwise] MA 12 a) Determine the expression of bending moment at any distance "x (0

Consider a fixed beam under uniformly distributed load 'w' as shown in the figure below: w A B Given: wL wl RA =, Rg =7 %3D %3D 2' 2 [counter – clockwise], MB 12 wL? [clockwise] MA 12 a) Determine the expression of bending moment at any distance "x (0

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter9: Deflections Of Beams

Section: Chapter Questions

Problem 9.5.14P: A cantilever beam is subjected to load P at mid-span and counterclockwise moment Mat B (see figure)....

See similar textbooks

Related questions

Q: A simply supported beam with span of 8 m is subjected to a counterclockwise moment at the left…

A: Given Data The length of the beam is:L=8m The yield strength of the steel beam is:Fy=248 MPa The…

Q: Fig. 2 shows the shear force (KN) and bending moment (KNm) diagrams for the beam in Fig. 1. P- 120 e…

A: The situation of the beam is shown below.

Q: A I-meter-long, simply supported copper beam (E= 117 GPa) carries uniformly distributed load q. The…

Q: Problem The cross section and dimensions of a 8 m long asymmetric I-beam are shown in Figure 1.…

Q: In addition, you should be able to calculate the shear force and the maximum bending moment of a…

Q: a) Plot a graph of beam deflection versus load and calculate the stiffness k of the beam using W 8…

A: we have to determine the stiffness and MOI

Q: Consider the beam shown in (Figure 1). Suppose that the distributed load intensities w1 = 60 lb/ft…

A: The forces acting on the beam is shown below,

Q: В C 3 m 3 m

Q: A simply supported beam ABCD is subjected to a linearly distributed load, with wo = 100 N/m, two…

Q: A beam shown in Figure 6.20 is made of T beam, determine maximum bending stress in tension and…

Q: Figure shows a 90° cantilever (dark blue line), with dimensions and coordinate system directions…

A: We need to use Castigleanos theorem to determine the deflection....

Q: A composite beam consists of concrete slab (1) that is rigidly attached to the top flange of a W16 ×…

Q: Problem 1 [30pts] The cross section of a rectangular beam having width b and height h is shown in…

A: Section modulus on any section is given by Z=Iy Where I=Area Moment of inertia about the axis of…

Q: For the wood beam shown in Figure A, assume L = 1.3 m and P = 11 kN. The beam cross section shown in…

A: Here we need to apply the concepts pf SFD and Bending of beams...

Q: A Simple beam AB supports a concentrated load P acting at distances a and b from the left and right…

A: given; L=a+b lets take reaction force at A =RAlets take reaction force at B =RB

Q: A beam is a structural member that is subjected primarily to transverse loads. The beam AB in Figure…

Q: The cantilevered beam depicted in the below fig. is subjected to a tip load P. The tip of a second…

Q: A simply supported beam with a length L = 11.3 ft and height 7 in. is bent by couples M0 into a…

A: GIVEN: Length (L)=11.3 ft Curvature (k)=0.003 /ft y=3.5 in TO FIND: The deflection at mid span and…

Q: In addition, you should be able to calculate the shear force and the maximum bending moment of a…

A: Solution:

Q: Figure Q1 shows a cantilever beam ABCDE subjected to a uniformly distributed load, w from points B…

A: The loading diagram is Here, the UDL is extended upto point E and a upward counterbalance UDL from…

Q: Determine the maximum tensile bending stress of the entire beam (o max.ten.overall) in N/mm2, for…

Q: For the wood beam shown in Figure A, assume L = 1.5 mand P = 15 kN. The beam cross section shown in…

Q: the amount of collapse that will occur at the B point is 4mm. The diameter of

A: We will find out the deflection at B due to point load and moment and equate it with permissible…

Q: A circular beam carries a concentrated and a distributed load as shown in the figure. Determine the…

A: An overhanging beam is one in which the terminal portion of the beam extends beyond the support.…

Q: For simply supported beam below, find; Free body diagram and reaction forces Shear force value and…

A: i) Freebody Diagram and Reaction Forces: ΣMD = 0FA×7-15(1.5+2+2)-10(2)=0FA×7-102.5=0RA =14.64 KNΣFy…

Q: In the simple beam given in the figure, Find the maximum slope and depression using the values.…

A: When any beam is subjected to a load, it deflects, and the neutral axis becomes a curved line which…

Q: Consider the fiberglass beam shown in (Figure 1). Suppose that w1 = 4.6 kN/m and w2 = 5.1 kN/m.…

Q: A steel beam ABC carries a uniformly distributed load of w (kN/m) over the unsupported length BC, as…

Q: Q1 A cantilever beam AB of isosceles trapezoidal cross section has length L = 0.8 m, dimension bi =…

A: For solution refer below images.

Q: X N/m A В -Y m Z m Figure Q2(a) Table 02(a): Parameter Student with EVEN last digits of matric…

Q: Rectangular Beam with height of cross section = 8" h=8" and width of cross section = 2" b=2" FIGURE…

A: Find the stress in the section.

Q: A cantilever beam of length 5m is loaded at the free end with a point load. The bending moment at…

A: Given data: The length of the beam is L = 5 m. The bending moment at the fixed end is M = 2.5 kN-m.…

Q: Answer only Civil engineering A cantilever beam of length L and flexural modulus El is subjected…

Q: For the fixed-ended beam shown in figure below, each end moment equals: P A В L/2- L/2- P/2 O P/8…

A: For the fixed-ended beam shown in figure below, each end moment equals: P/2 P/8 P/16 P/4

Q: If the "I" value of beam cross section is 6,400,000 mm4 and the maximum distance from the neutral…

Q: Draw free body diagram without writing shear and moment equation of beam shown in Figure 2.19. Give…

Q: (a) The Figure la show the cross-section of a beam. All dimension are in cm. 10 2 10 Figure la (i)…

Q: For the beam with FBD shown in Figure 2, what is the expression for the bending moment M in terms of…

A: Answer: ◆ M = (-wx2/2) + R(x-1). ◆ The correct answer is (d)

Q: For the beam and loading shown in Figure 5, determine the value of w(r) at the point of action of…

Q: What is the span length L (in ft) of a uniformly loaded, simple beam of wide-flange cross section…

A: Given : The maximum bending stress = 11400 psi The maximum deflection = 0.1 in The modulus of…

Q: A simply supported beam hinged at A and supported at C, is carrying a distributed load and a point…

A: Note: Company policy does not allow to answer more than three subparts. So answer of first three…

Q: A beam supported by two identical springs at points A and B (see figure). Given that flexural of…

Q: Let's consider a fixed supported beam subjected to a triangular distributed load as shown in the…

Q: b) The simply supported beam as shown in Figure 2 is made of five planks glued together at A and B.…

Q: 1- The below cantilever beam AB of length L= 3m carries a uniformly distributed load of intensity w…

Q: An overhanging beam ABCD is supported and loaded as shown in Figure 4(a). The beam cross-section as…

Q: 2a) a uniformly distributed load beam has a cross-sectional area as shown in Figure 2(a) i.…

Q: Beam AB is subjected to a distributed load as shown in (Figure 1). The cross section of the beam is…

A: Given: The load w is 80 kN/m for the beam as shown below: The cross section dimension is shown…

Concept explainers

Slope and Deflection

The slope in a deflected beam is described as an angle in radians made by the tangent of the section with the original axis of the beam. The deflection at any point on the axis of the beam is defined as the lateral displacement of the point before and after loading.

Question

Consider a fixed beam under uniformly distributed load 'w' as shown in the figure below:
B
Given:
wL
wL
RA = Rg =
2'
2
wl?
[counter – clockwise], MB
wL?
[clockwise]
MA
12
a) Determine the expression of bending moment at any distance "x (0 < x < L)" from the support 'A'
b) Determine the expressions for slope and deflection respectively

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Trending now

This is a popular solution!

Step by step

Solved in 4 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A simple beam AB of length L is subjected to loads that produce a symmetric deflection curve with maximum deflection S at the midpoint of the span (see figure). How much strain energy U is stored in the beam if the deflection curve is (a) a parabola and (b) a half wave of a sine curve?
A cantilever beam of a length L = 2.5 ft has a rectangular cross section {b = 4in,, h = Sin,) and modulus E = 10,000 ksi. The beam is subjected to a linearly varying distributed load with a peak intensity qQ= 900 lb/ft. Use the method of superposition and Cases 1 and 9 in Table H-l to calculate the deflection and rotation at B.
Beam ACB hangs from two springs, as shown in the figure. The springs have stiffnesses Jt(and k2^ and the beam has flexural rigidity EI. What is the downward displacement of point C, which is at the midpoint of the beam, when the moment MQis applied? Data for the structure are M0 = 7.5 kip-ft, L = 6 ft, EI = 520 kip-ft2, kx= 17 kip/ft, and As = 11 kip/ft. Repeat part (a), but remove Af0 and instead apply uniform load q over the entire beam.
A fixed-end beam AB of a length L supports a uniform load of intensity q (see figure). Beginning with the second-order differential equation of the deflection curve (the bending-moment equation), obtain the reactions, shear forces, bending moments, slopes, and deflections of the beam. Construct the shear-force and bending-moment diagrams, Labeling all critical ordinales.
A cantilever beam model is often used to represent micro-clectrical-mechanical systems (MEMS) (sec figure}. The cantilever beam is made of polysilicon (E = 150 GPa) and is subjected to an electrostatic moment M applied at the end of the cantilever beam. 1 f dimensions arc h — 2 [im, h — 4 ^m, and L = 520 ^mt find expressions for the tip deflection and rotation of the cantilever beam in terms of moment M.
A cantilever beam has a length L = 12 ft and a rectangular cross section (b = 16 in., h = 24 in.), A linearly varying distributed load with peak intensity q0acts on the beam, (a) Find peak intensity q0if the deflection at joint B is known to be 0.18 in. Assume that modulus E = 30,000 ksi. (b) Find the location and magnitude of the maximum rotation of the beam.
A fixed-end beam AB carries point load P acting at point C. The beam has a rectangular cross section (b = 75 mm, h = 150 mm). Calculate the reactions of the beam and the displacement at point C. Assume that E = 190 GPa.
A beam ABC is fixed at end A and supported by beam DE at point B (sec figure). Both beams have the same cross section and are made of the same material. Determine all reactions due to the load P. What is the numerically largest bending moment in cither beam?
A simple beam AB of length L and height /; undergoes a temperature change such that the bottom of the beam is at temperature 7™, and the top of the beam is at temperature Tx(see figure). Determine the equation of the deflection curve of the beam, the angle of rotation 9Aat the left-hand support, and the deflection 8mjLXat the midpoint.
.2 A ligmio.irc ii supported by two vorlical beams consistins: of thin-walled, tapered circular lubes (see ligure part at. for purposes of this analysis, each beam may be represented as a cantilever AB of length L = 8.0 m subjected to a lateral load P = 2.4 kN at the free end. The tubes have a constant thickness ; = 10.0 mm and average diameters dA = 90 mm and dB = 270 mm at ends A and B, re s pec lively. Because the thickness is small compared to the diameters, the moment of inerlia at any cross section may be obtained from the formula / = jrrf3;/8 (see Case 22, Appendix E); therefore, the section modulus mav be obtained from the formula S = trdhlA. (a) At what dislance A from the free end docs the maximum bending stress occur? What is the magnitude trllul of the maximum bending stress? What is the ratio of the maximum stress to the largest stress (b) Repeat part (a) if concentrated load P is applied upward at A and downward uniform load q {-x) = 2PIL is applied over the entire beam as shown in the figure part b What is the ratio of the maximum stress to the stress at the location of maximum moment?
Obtain a formula for the ratio c/maxof the deflection at the midpoint to the maximum deflection for a simple beam supporting a concentrated load P (see figure). From the formula, plot a graph of c/max versus the ratio a/L that defines the position of the load (0.5 < a/L < ) What conclusion do you draw from the graph? (Use the formulas of Example 9-3.)
A simply supported beam (E = 1600 ksi) is loaded by a triangular distributed load from A to C(see figure). The load has a peak intensity q0= 10 lb/ ft, and the deflection is known to be 0.01 in, at point C. The length of the beam is 12 ft, and the ratio of the height to the width of the cross section is (h:b) 2:1, Find the height h; and width h of the cross section of the beam.