Prior to fat analysis, two samples: Sample 1 and Sample 2 with the initial weight for each sample=2.50g. After pre-dried, samples were grinded and reweighted; s1-2.15g and s2=2.11g. Samples were placed in dried glass wool in each thimble and placed extractor for 4-5 hours. Samples were then dried and cooled in desiccators before another weight recorded. The weight for s1=93.51g and for s2=93.78g #Weight of round bottom flask (with glass wool+ thimble) (g) = 92.00 #Weight of round bottom flask (g) =91.00 1) Calculate the percentage of dried fat in s1 2) Calculate the percentage of dried fat in s2. 3) Sample 3 have dried fats of 50%. Identify the correct sequence from the highest to the lowest % of dried fats in sample.

Prior to fat analysis, two samples: Sample 1 and Sample 2 with the initial weight for each sample=2.50g. After pre-dried, samples were grinded and reweighted; s1-2.15g and s2=2.11g. Samples were placed in dried glass wool in each thimble and placed extractor for 4-5 hours. Samples were then dried and cooled in desiccators before another weight recorded. The weight for s1=93.51g and for s2=93.78g #Weight of round bottom flask (with glass wool+ thimble) (g) = 92.00 #Weight of round bottom flask (g) =91.00 1) Calculate the percentage of dried fat in s1 2) Calculate the percentage of dried fat in s2. 3) Sample 3 have dried fats of 50%. Identify the correct sequence from the highest to the lowest % of dried fats in sample.

Appl Of Ms Excel In Analytical Chemistry

2nd Edition

ISBN:9781285686691

Author:Crouch

Publisher:Crouch

Chapter14: Chromatography

Section: Chapter Questions

Problem 9P

See similar textbooks

Similar questions

1. Minimal OR Maximum 2. Impurities OR substances while Impurities OR substance remain… 3. Centrifuge OR Filter
The method of standard additions was used to determine nitrite in a soil sample. A 1.00-mL portions of the soil extract sample was transferred to four 25-mL volumetric flasks. To each flask, increment volumes of a 1.00 x10-3M nitrite was added according to the table below. A colorimetric reagent was added to each flask to convert the nitrite into a colored product, and finally diluted to volume. What is the concentration of the nitrite in the soil extract based on the absorbance data below (with blank correction included)? Vol. of standard nitrite added, ml Absorbance 5.00 0.079 10.00 0.161 15.00 0.236 20.00 0.318 25.00 0.403
TRUE OR FALSE __________ 6. The bowl of the funnel for gravity filtration may be filled to the brim. __________ 7. Transfer liquids and solutions from a reagent bottle or beaker with the aid of a stirring rod. __________ 8. Never touch, taste, or smell a chemical unless specifically told to do so. __________ 9. If uncertain as to how to dispose of a chemical, dumping it into the sink followed by copious amount of water is a safe disposal procedure. __________ 10. A centrifuge machine should be balanced with an even number of centrifuge/test tubes, placed across the rotor from one another, with equal volumes of liquid.
Filtration of samples A, B, and C show no residue left. After letting them dry in different beakers, SAmple A remains no residues. Sample B shows crystal leftovers, and sample C show brown film on the beaker walls. This means that: a. Two or more samples are heterogenous b. Two or more samples are homogenous c. all sample have 2 or more phases d. all samples are pure
Using the percent purity calculations, determine the percent yield of synthesis of aspirin. Part I Synthesis of Aspirin Mass of salicylic acid used (g) 2.029g Volume of acetic anhydride used (mL) 5ml Mass of acetic anhydride used (vol. × 1.08 g/mL) 5.4g Mass of aspirin synthesized (g) 3.256g Part II Melting Temperature Data Melting temperature (°C) 133°C Part III Salicylic Acid Standard Stock Solution Initial mass of salicylic acid (g) 0.210g Moles of salicylic acid (mol) 0.0147 mol Initial molarity of salicylic acid (M) 0.724 M Part III Beer’s Law Data for Salicylic Acid Standard Solutions Trial Concentration (M) Absorbance Water (mL) 1 10 0.301 0 2 7.5 0.219 2.5 3 5.0 0.163 5.0 4 2.5 0.074 7.5 Best-fit line equation for the salicylic acid standards Test of the Purity of the Synthesized Aspirin Initial mass of aliquot of product (g)…
. The total cation content of natural water is often determined by exchanging the cations for hydrogen ions on an ion exchange resin. The cations are adsorbed to the resin which releases H+ (1:1 exchange) which can then be titrated with a base. A 25.0 mL sample of a natural water is diluted to 100 mL with distilled water and 2.0 g of a cation-exchange resin was added. After stirring, the mixture was filtered and the solid remaining on the filter paper was washed with three 15.0 mL portions of distilled water. The filtrate and washing required 15.3 mL of 0.0202 M NaOH to reach the equivalence pt. Calculate the number of moles of cation present in 1.00 L of sample.
Choose the one correct or one incorrect statement regarding filtration: gravity filtration uses a Buchner funnel, filtering flask and negative pressure filter paper should be wet with solvent to seal it to the funnel before filtering the solution collected in the filtering flask is called the residue vacuum filtration is most often used to remove impurities from a solution the solution to be filtered should completely fill the top of a Buchner funnel
(Please show step bys step process.) In paper recycling, scrap papers are torn and immersed completely in water. The solution, which is 20% dry scrap paper, is let undisturbed for about 8-12 hours and then blended (this becomes the paper pulp). Eight grams of starch is added for every 92g of pulp to help the pulp hold together better as it dries into paper later on. Arter addition of starch, the solution was dried such that the final solution will only contain 3% water. Calculate how many grams of the dry paper needed to make 100g of nearly dry paper.
A student weighed approximately 1.5 g of an unknown solid acid and carefully placed the sample in a clean, but not necessarily dry, 250.0 mL volumetric flask. The student added deionized water to the flask, swirled the solution until the solid acid dissolved, then added sufficient deionized water to fill the flask to the fill line. A volumetric pipet was used to transfer 25.00 mL of the resulting solution to an Erlenmeyer flask, and 2 – 3 drops of phenolphthalein were added.The student filled the sodium hydroxide buret and titrated the acid solution with standardized 0.1000 M NaOH to the first permanent faint pink color, then repeated the titration a second time.Your instructor will provide the mass of unknown solid acid, as well as the initial and final buret readings for the two titrations. From this data and the information above, you will be able to calculate the molar mass of the unknown acid.The unknown solid acid is diprotic; that is, there are two moles of ionizable H+ ions per…
A student weighed approximately 1.5 g of an unknown solid acid and carefully placed the sample in a clean, but not necessarily dry, 250.0 mL volumetric flask. The student added deionized water to the flask, swirled the solution until the solid acid dissolved, then added sufficient deionized water to fill the flask to the fill line. A volumetric pipet was used to transfer 25.00 mL of the resulting solution to an Erlenmeyer flask, and 2 – 3 drops of phenolphthalein were added.The student filled the sodium hydroxide buret and titrated the acid solution with standardized 0.1000 M NaOH to the first permanent faint pink color, then repeated the titration a second time.Your instructor will provide the mass of unknown solid acid, as well as the initial and final buret readings for the two titrations. From this data and the information above, you will be able to calculate the molar mass of the unknown acid.The unknown solid acid is diprotic; that is, there are two moles of ionizable H+ ions per…
A core sample is saturated with an oil (?o = 35oAPI), gas and water. The initial weight of the sample is 224.14 g. After the gas is displaced by water (?w = 1 g/cm3 ), the weight is increased to 225.90 g. The sample is the placed in a Soxhlet distillation apparatus, and 4.4 cm3 water is extracted. After drying the core sample, the weight is now 209.75 g. The sample bulk volume, 95 cm3 is measured in a mercury pycnometer. Find the porosity, water saturation, oil saturation, gas saturation and lithology of the core sample.
Several steps can be done in preparing samples for analysis with high moisture content except ____________. Group of answer choices The moisture present in the sample is removed before weighing the analytical sample. The analysis is immediately carried out on the wet sample. The moisture content of the sample is determined immediately upon receipt of the sample. The analysis is carried out on the dried sample after the moisture content is determined.