Concept explainers
Videos
Why should brake fluid not be filled above the full or MAX level as indicated on the master cylinder reservoir?
Explain the reason why brake fluid should not be filled above the MAX level as displayed on the master cylinder reservoir.
Explanation of Solution
Brake fluid is generally used to transfer the foot force of a driver to the brake pedal. The brake pedal is stated as service brake in accordance with each individual wheel brake. The brake fluid should not be allowed to fill above the maximum limit as displayed on the master cylinder reservoir for the specified conditions.
The overfilling of the brake fluid should be avoided as the brake fluid becomes hotter when the brakes are applied. It is suggested to have a space in the master cylinder reservoir for the brake fluid to enlarge. Thus, the brake fluid should be filled up to the stated level with respect to the specified conditions.
Want to see more full solutions like this?
Chapter 17 Solutions
Automotive Technology: Principles, Diagnosis, And Service; My Automotive Lab With Pearson Etext -- Access Code Card -- For Automotive Technology; ... For Automotive Technology (5th Edition)
Additional Engineering Textbook Solutions
Statics and Mechanics of Materials (5th Edition)
INTERNATIONAL EDITION---Engineering Mechanics: Statics, 14th edition (SI unit)
Engineering Mechanics: Statics & Dynamics (14th Edition)
HEAT+MASS TRANSFER:FUND.+APPL.
Applied Fluid Mechanics (7th Edition)
Fox and McDonald's Introduction to Fluid Mechanics
- True or False? If brake fluid is dark or brown colored. the system must be flushed and the fluid replaced.arrow_forwardWhile discussing quick take-up master cylinders: Technician A says that this design allows for increased braking power. Technician B says that this design is only used on drum brake systems. Who is correct? Technician A only Technician B only Both A and B Neither A nor Barrow_forwardWhich of the following is not a suitable way to bleed an entire hydraulic brake system? Manual bleeding Bench bleeding Pressure bleeding Vacuum bleedingarrow_forward
- Technician A says that the master cylinder should be bled before any individual wheel assembly. Technician B says that the bleeder screw should be closed before the brake pedal is released during manual bleeding of the system. Who is correct? Technician A only Technician B only Both A and B Neither A nor Barrow_forwardTrue or False? If brake fluid is discolored, the system must be flushed and the fluid replaced.arrow_forwardWhile discussing what affects the amount of pressure exerted by the brakes: Technician A says that the shorter the line, the more pressure there will be. Technician B says that braking force will increase if the size of the pistons in a master cylinder are increased. Who is correct? Technician A only Technician B only Both A and B Neither A nor Barrow_forward
- Which of the following is not a factor in determiningthe effectiveness of a brake system?a. Heat dissipationb. Lubricantc. Pressured. Frictional contact areaarrow_forwardWhich of the following is NOT a component of a typical dual master cylinder? a. primary piston b. piston stop bolt c. pressure relief valve d. secondary cup Brake hoses are typically rigid steel lines used to transmit brake fluid pressure. True or False? A master cylinder that has a bulge at the rear, near the mounting flange, is a _____type master cylinder.arrow_forwardWhat type of brake uses the inside of each rear wheel hub and rotor assembly as a parking brake drum?arrow_forward
Automotive TechnologyMechanical EngineeringISBN:9781337794213Author:ERJAVEC, Jack.Publisher:Cengage,
Automotive Technology: A Systems Approach (MindTa...Mechanical EngineeringISBN:9781133612315Author:Jack Erjavec, Rob ThompsonPublisher:Cengage Learning