Thermodynamics: An Engineering Approach
Thermodynamics: An Engineering Approach
9th Edition
ISBN: 9781259822674
Author: Yunus A. Cengel Dr., Michael A. Boles
Publisher: McGraw-Hill Education
bartleby

Videos

Textbook Question
Book Icon
Chapter 17.7, Problem 128RP

An aircraft flies with a Mach number Ma1 = 0.9 at an altitude of 7000 m where the pressure is 41.1 kPa and the temperature is 242.7 K. The diffuser at the engine inlet has an exit Mach number of Ma2 = 0.3. For a mass flow rate of 38 kg/s, determine the static pressure rise across the diffuser and the exit area.

Expert Solution & Answer
Check Mark
To determine

The static pressure rise across the diffuser and the exit area.

Answer to Problem 128RP

The pressure rise across the diffuser in the aircraft is 24.2kPa.

The exit area of the diffuser is 0.463m2.

Explanation of Solution

Write the formula for velocity of sound at the inlet conditions.

c1=kRT1 (I)

Here, speed of sound at the inlet condition is c1, gas constant of air is R, actual temperature of air at the inlet is T1 and ratio of specific heats is k.

Write formula for the velocity of air at inlet.

V1=Ma1c1 (II)

Here, velocity of air after the normal shock is V2.

Write the formula stagnation temperature of air at the inlet.

T01=T1+V122cp (III)

Here, actual (static) temperature of air at the inlet is T1, specific heat at constant pressure is cp and stagnation temperature of air at inlet is T01.

Consider the flow is isentropic.

Write the formula for stagnation pressure of air at inlet (isentropic condition).

P01=P1(T01T1)k/(k1) (IV)

Here, the static pressure of air at inlet is P1, and stagnation pressure of air at inlet is P01.

Consider the diffuser is adiabatic and the inlet and exit enthalpies are equal.

h01=h02cpT01=cpT02T01=T02

When the stagnation temperatures are equal, the stagnation pressure are also equal.

P01=P02

Here, the static pressure of air at inlet is P1, and stagnation pressure of air at exit is P02.

Write the formula for velocity of sound at the exit conditions.

c2=kRT2 (V)

Here, speed of sound at the exit condition is c2, gas constant of air is R.

Write formula for the velocity of air at exit.

V2=Ma2c2=Ma2kRT2 (VI)

Here, the exit Mach number is Ma2.

Write the formula stagnation temperature of air at the exit.

T02=T2+V222cp (VII)

Here, actual (static) temperature of air at the inlet is T1, specific heat at constant pressure is cp and stagnation temperature of air at inlet is T01.

Write the formula for static pressure of air at exit (isentropic condition).

P2=P02(T2T02)k/(k1) (VIII)

Here, the static pressure of air at inlet is P1, and stagnation pressure of air at exit is P02.

Write the formula for static pressure difference of air.

ΔP=P2P1 (IX)

Write the formula for mass flow rate of air at exit condition.

m˙=A2V2v2=A2V2P2RT2 (X)

Here, the exit cross sectional area is A2 and exit specific volume is v2.

Rearrange the Equation (X) to obtain A2.

A2=m˙RT2V2P2 (XI)

Refer Table A-1, “Molar mass, gas constant, and critical-point properties”.

The gas constant (R) of air is 0.287kJ/kgK.

Refer Table A-2, “Ideal-gas specific heats of various common gases”.

The specific heat at constant pressure (cp) of air is 1.005kJ/kgK.

The specific heat ratio (k) of air is 1.4.

Conclusion:

Substitute 0.287kJ/kgK for R, 1.4 for k, and 242.7K for T1 in Equation (I).

c1=1.4×0.287kJ/kgK×242.7K=97.51686kJ/kg×1000m2/s21kJ/kg=312.2769m/s

Substitute 312.2769m/s for c1, and 0.9 for Ma1 in Equation (II).

V1=0.9×312.2769m/s=281.0492m/s281m/s

Substitute 242.7K for T1, 281m/s for V1 , and 1.005kJ/kgK for cp in Equation (III).

T01=242.7K+(281m/s)22×1.005kJ/kgK=242.7K+78961m2/s2×1kJ/kg1000m2/s22.01kJ/kgK=242.7K+39.28K=282K

Substitute 41.1kPa for P1, 282K for T01, 1.4 for k and 242.7K for T1 in Equation (IV).

P01=41.1kPa(282K242.7K)1.4/(1.41)=41.1kPa(1.1619)3.5=41.1kPa(1.6908)=69.5kPa

Here,

T01=T02=282KP01=P02=69.5kPa

Substitute 0.3 for Ma2, 0.287kJ/kg for R, and 1.4 for k in Equation (VI).

V2=0.3×1.4×0.287kJ/kgK×T2=0.3×0.4018kJ/kgK×1000m2/s21kJ/kg×T2=0.3×20.04T2=6.01T2m/s (XII)

Substitute 282 K for T02, 6.01T2m/s for V2, and 1.005kJ/kgK for cp in

Equation (VII).

282K=T2+(6.01T2m/s)22×1.005kJ/kgK282K=T2+36.12T2m2/s2×1kJ/kg1000m2/s22.01kJ/kgK282K=T2+0.01797T2282=1.01797T2

T2=2821.01797=277.0219K277K

Substitute 1.4 for k, 282K for T02, 277K for T2 and 69.5kPa for P02 in

Equation (VIII).

P2=69.5kPa(277K282K)1.4/(1.41)=69.5kPa(0.9823)3.5=69.5kPa(0.9393)=65.28kPa

Substitute 65.28kPa for P2, and 41.1kPa for P1 in Equation (IX).

ΔP=65.28kPa41.1kPa=24.2kPa

Thus, the pressure rise across the diffuser in the aircraft is 24.2kPa.

Substitute 277K for T2 in Equation (XII).

V2=6.01277Km/s=100.0263m/s100m/s

Substitute 38kg/s for m˙, 65.28kPa for P2, 100m/s for V2, 0.287kJ/kgK for R, and 277K for T2 in Equation (XI).

A2=(38kg/s)(0.287kJ/kgK)(277K)(100m/s)(65.28kPa)=(38kg/s)(0.287kJ/kgK×1kPam31kJ)(277K)6528kPam/s=3020.962kPam3/s6528kPam/s=0.4628m2

0.463m2

Thus, the exit area of the diffuser is 0.463m2.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
An aircraft flies with a Mach number Ma1 = 0.9 at an altitude of 7000 m where the pressure is 41.1 kPa and the temperature is 242.7 K. The diffuser at the engine inlet has an exit Mach number of Ma2 = 0.3. For a mass flow rate of 50 kg/s, determine the static pressure rise across the diffuser and the exit area
An air stream with a Mach number of (3.04) a pressure of (302 kPa) and a temperature of (502 K) enters a diverging channel. If the ratio of the exit cross- sectional area to the inlet cross- sectional area is (3). Determine the back pressure which is necessary to produce a normal shock wave in the channel with a cross-sectional area equal to twice the inlet cross-sectional area. Assume steady, one-dimensional isentropic flow except through the normal shock wave. Ax=2Ai , Ae=3Ai
Compressed air from the compressor of a gas turbine enters the combustion chamber at T1 = 700 K, P1 = 600 kPa, and Ma1 = 0.2 at a rate of 0.3 kg/s. Via combustion, heat is transferred to the air at a rate of 150 kJ/s as it flows through the duct with negligible friction. Determine the Mach number at the duct exit, and the drop in stagnation pressure P01 − P02 during this process

Chapter 17 Solutions

Thermodynamics: An Engineering Approach

Ch. 17.7 - Prob. 11PCh. 17.7 - Prob. 12PCh. 17.7 - Prob. 13PCh. 17.7 - Prob. 14PCh. 17.7 - Prob. 15PCh. 17.7 - Prob. 16PCh. 17.7 - Prob. 17PCh. 17.7 - Prob. 18PCh. 17.7 - Prob. 19PCh. 17.7 - Prob. 20PCh. 17.7 - Prob. 21PCh. 17.7 - Prob. 22PCh. 17.7 - Prob. 23PCh. 17.7 - Prob. 24PCh. 17.7 - Prob. 25PCh. 17.7 - Prob. 26PCh. 17.7 - The isentropic process for an ideal gas is...Ch. 17.7 - Is it possible to accelerate a gas to a supersonic...Ch. 17.7 - Prob. 29PCh. 17.7 - Prob. 30PCh. 17.7 - A gas initially at a supersonic velocity enters an...Ch. 17.7 - Prob. 32PCh. 17.7 - Prob. 33PCh. 17.7 - Prob. 34PCh. 17.7 - Prob. 35PCh. 17.7 - Prob. 36PCh. 17.7 - Prob. 37PCh. 17.7 - Air at 25 psia, 320F, and Mach number Ma = 0.7...Ch. 17.7 - Prob. 39PCh. 17.7 - Prob. 40PCh. 17.7 - Prob. 41PCh. 17.7 - Prob. 42PCh. 17.7 - Prob. 43PCh. 17.7 - Is it possible to accelerate a fluid to supersonic...Ch. 17.7 - Prob. 45PCh. 17.7 - Prob. 46PCh. 17.7 - Prob. 47PCh. 17.7 - Consider subsonic flow in a converging nozzle with...Ch. 17.7 - Consider a converging nozzle and a...Ch. 17.7 - Prob. 50PCh. 17.7 - Prob. 51PCh. 17.7 - Prob. 52PCh. 17.7 - Prob. 53PCh. 17.7 - Prob. 54PCh. 17.7 - Prob. 57PCh. 17.7 - Prob. 58PCh. 17.7 - Prob. 59PCh. 17.7 - Prob. 60PCh. 17.7 - Prob. 61PCh. 17.7 - Air enters a nozzle at 0.5 MPa, 420 K, and a...Ch. 17.7 - Prob. 63PCh. 17.7 - Are the isentropic relations of ideal gases...Ch. 17.7 - What do the states on the Fanno line and the...Ch. 17.7 - It is claimed that an oblique shock can be...Ch. 17.7 - Prob. 69PCh. 17.7 - Prob. 70PCh. 17.7 - For an oblique shock to occur, does the upstream...Ch. 17.7 - Prob. 72PCh. 17.7 - Prob. 73PCh. 17.7 - Prob. 74PCh. 17.7 - Prob. 75PCh. 17.7 - Prob. 76PCh. 17.7 - Prob. 77PCh. 17.7 - Prob. 78PCh. 17.7 - Prob. 79PCh. 17.7 - Air flowing steadily in a nozzle experiences a...Ch. 17.7 - Air enters a convergingdiverging nozzle of a...Ch. 17.7 - Prob. 84PCh. 17.7 - Prob. 85PCh. 17.7 - Consider the supersonic flow of air at upstream...Ch. 17.7 - Prob. 87PCh. 17.7 - Prob. 88PCh. 17.7 - Air flowing at 40 kPa, 210 K, and a Mach number of...Ch. 17.7 - Prob. 90PCh. 17.7 - Prob. 91PCh. 17.7 - Prob. 92PCh. 17.7 - What is the characteristic aspect of Rayleigh...Ch. 17.7 - Prob. 94PCh. 17.7 - Prob. 95PCh. 17.7 - What is the effect of heat gain and heat loss on...Ch. 17.7 - Consider subsonic Rayleigh flow of air with a Mach...Ch. 17.7 - Prob. 98PCh. 17.7 - Prob. 99PCh. 17.7 - Air is heated as it flows subsonically through a...Ch. 17.7 - Prob. 101PCh. 17.7 - Prob. 102PCh. 17.7 - Prob. 103PCh. 17.7 - Air enters a rectangular duct at T1 = 300 K, P1 =...Ch. 17.7 - Prob. 106PCh. 17.7 - Prob. 107PCh. 17.7 - Air is heated as it flows through a 6 in 6 in...Ch. 17.7 - What is supersaturation? Under what conditions...Ch. 17.7 - Steam enters a converging nozzle at 5.0 MPa and...Ch. 17.7 - Steam enters a convergingdiverging nozzle at 1 MPa...Ch. 17.7 - Prob. 112PCh. 17.7 - Prob. 113RPCh. 17.7 - Prob. 114RPCh. 17.7 - Prob. 115RPCh. 17.7 - Prob. 116RPCh. 17.7 - Prob. 118RPCh. 17.7 - Prob. 119RPCh. 17.7 - Using Eqs. 174, 1713, and 1714, verify that for...Ch. 17.7 - Prob. 121RPCh. 17.7 - Prob. 122RPCh. 17.7 - Prob. 123RPCh. 17.7 - Prob. 124RPCh. 17.7 - Prob. 125RPCh. 17.7 - Prob. 126RPCh. 17.7 - Nitrogen enters a convergingdiverging nozzle at...Ch. 17.7 - An aircraft flies with a Mach number Ma1 = 0.9 at...Ch. 17.7 - Prob. 129RPCh. 17.7 - Helium expands in a nozzle from 220 psia, 740 R,...Ch. 17.7 - Helium expands in a nozzle from 0.8 MPa, 500 K,...Ch. 17.7 - Air is heated as it flows subsonically through a...Ch. 17.7 - Air is heated as it flows subsonically through a...Ch. 17.7 - Prob. 134RPCh. 17.7 - Prob. 135RPCh. 17.7 - Air is cooled as it flows through a 30-cm-diameter...Ch. 17.7 - Saturated steam enters a convergingdiverging...Ch. 17.7 - Prob. 138RPCh. 17.7 - Prob. 145FEPCh. 17.7 - Prob. 146FEPCh. 17.7 - Prob. 147FEPCh. 17.7 - Prob. 148FEPCh. 17.7 - Prob. 149FEPCh. 17.7 - Prob. 150FEPCh. 17.7 - Prob. 151FEPCh. 17.7 - Prob. 152FEPCh. 17.7 - Consider gas flow through a convergingdiverging...Ch. 17.7 - Combustion gases with k = 1.33 enter a converging...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Intro to Compressible Flows — Lesson 1; Author: Ansys Learning;https://www.youtube.com/watch?v=OgR6j8TzA5Y;License: Standard Youtube License