Thermodynamics: An Engineering Approach
Thermodynamics: An Engineering Approach
9th Edition
ISBN: 9781259822674
Author: Yunus A. Cengel Dr., Michael A. Boles
Publisher: McGraw-Hill Education
bartleby

Videos

Question
Book Icon
Chapter 17.7, Problem 90P
To determine

The pressure, temperature, velocity, Mach number, and stagnation pressure downstream of the shock and Compare for helium undergoing a normal shock under the same conditions.

Expert Solution & Answer
Check Mark

Answer to Problem 90P

The Mach number value of air after the normal shock through the nozzle is 0.5039.

The actual temperature of air after the normal shock through the nozzle

is 604.34K.

The actual pressure of air after the normal shock through the nozzle is 447.76kPa.

The stagnation pressure of air after the normal shock though the nozzle

is 532.5kPa.

The velocity of air after the normal shock through the nozzle is 248.31m/s.

Thus, the Mach number of helium gas after the normal shock through the nozzle

 is 0.5455.

Thus, the actual temperature of helium after the normal shock through the nozzle is 799.362K.

Thus, the actual pressure of helium after the normal shock through the nozzle

 is 475.7kPa.

Thus, the stagnation pressure of helium after the normal shock though the nozzle

is 602.5kPa.

Thus, the velocity of helium after the normal shock through the nozzle is 907.5m/s.

Comparison between the obtained results of air and helium is shown in below Table:

Parameters/ ConditionsAirHelium
Mach number value0.50390.5455
Actual temperature of air604.34K799.362K
Actual pressure of air447.76kPa475.7kPa
Stagnation pressure532.5kPa602.5kPa
Velocity248.31m/s907.5m/s

Explanation of Solution

Write the expression for the velocity of sound after the normal shock.

c2=kRT2 (I)

Here, velocity of sound after the shock is c2, and gas constant of air is R.

Write the expression for the velocity of airafter the normal shock.

V2=Ma2c2 (II)

Write the expression for the Mach number for helium after the normal shock.

Ma2=(Ma12+2/(k1)2Ma12k/(k1)1)1/2 (III)

Here, Mach number of helium before the normal shock is Ma1, Mach number of helium

before the normal shock is Ma2, and ratio of specific heats for helium is k.

Write the expression for the actual pressure of helium gas after the normal shock.

P2P1=1+kMa121+kMa22 (IV)

Here, actual pressure of helium after the shock is P2, and actual pressure of helium before the shock is P1.

Write the expression for the actual temperature of helium gas after the normal shock.

T2T1=1+Ma12(k1)/21+Ma22(k1)/2 (V)

Here, actual temperature of helium after the shock is T2, and actual temperature of helium before the shock is T1.

Write the expression for the actual pressure of helium gas after the normal shock.

P02P01=1+kMa121+kMa22(1+(k1)Ma222)k/(k1) (VI)

Here, stagnation pressure of helium after the shock is P02, and stagnation pressure of helium before the shock is P01.

Write the expression for the velocity of sound after the normal shock.

c2=kRT2 (VII)

Here, velocity of sound after the shock is c2, and gas constant of helium is R.

Write the expression for the velocity of helium after the normal shock.

V2=Ma2c2 (VIII)

Conclusion:

Refer to Table A-33, “One-dimensional normal-shock functions for an ideal gas with k 5 1.4”, obtain the expressions of temperature ratio, pressure ratio, stagnation pressure ratio, and Mach number after the shock for a Mach number of 2.6 before the shock.

Ma2=0.5039

Thus, the Mach number value of air after the normal shock through the nozzle is 0.5039.

T2T1=2.2383 (IX)

P2P1=7.7200 (X)

P02P01=9.1813 (XI)

Here, actual pressure after the shock is P2, actual pressure before the shock is P1, stagnation pressure after the shock is P02, stagnation pressure before the shock is P01, and Mach number after the shock is Ma2, actual temperature after the shock is T2 and actual temperature before the shock is T1.

Substitute 270K for T1 in Equation (IX).

T2270K=2.2383T2=270K×2.2383T2=604.34K

Thus, the actual temperature of air after the normal shock through the nozzle

is 604.34K.

Substitute 58kPa for P1 in Equation (X).

P258kPa=7.7200P2=58kPa×7.7200P2=44.76kPa

Thus, the actual pressure of air after the normal shock through the nozzle is 447.76kPa.

The actual pressure before the normal shock is the same as the stagnation pressure before the normal shock (P1=P01) , as the flow through the nozzle is isentropic.

Substitute 58kPa for P01 in Equation (XI).

P0258kPa=9.1813P2=58kPa×9.1813P2=532.5kPa

Thus, the stagnation pressure of air after the normal shock though the nozzle

is 532.5kPa.

Refer to thermodynamics properties table and interpret the value of k, and R for a temperature of 270K, and a pressure of 58kPa for air as 1.4, and 0.287kJ/kgK.

Substitute 1.4 for k, 0.287kJ/kgK for R, and 604.34K for T2 Equation (I).

c2=1.4×0.287kJ/kgK×604.34K=492.27m/s

Substitute 0.5039for Ma2, and 492.27m/s for c2 in Equation (II).

V2=0.5039×492.27m/s=248.31m/s

Thus, the velocity of air after the normal shock through the nozzle is 248.31m/s.

Substitute 2.6for Ma1, and 1.667 for k in Equation (III).

Ma2=(2.62+2/(1.6671)2×2.62×1.667/(1.6671)1)1/2=0.5455

Thus, the Mach number of helium gas after the normal shock through the nozzle

 is 0.5455.

Substitute 1.667 for k, 2.6for Ma1, and 0.5455 for Ma2. in Equation (IV).

P2P1=1+1.667×(2.6)21+1.667×(0.5455)2

P2P1=8.2009 (XII)

Substitute 1.667 for k, 2.6for Ma1, and 0.5455 for Ma2. in Equation (V).

T2T1=1+2.62(1.6671)/21+0.54552(1.6671)/2

T2T1=2.9606 (XIII)

Substitute 1.667 for k, 2.6for Ma1, and 0.5455 for Ma2. in Equation (VI).

P02P01=1+1.667×2.621+1.667×0.54552(1+(1.6671)0.545522)1.667/(1.6671)

P02P01=10.389 (XIV)

Substitute 270K for T1 in Equation (XIII).

T2270K=2.9606T2=270K×2.9606T2=799.362K

Thus, the actual temperature of helium after the normal shock through the nozzle is 799.362K.

Substitute 58kPa for P1 in Equation (XII).

P258kPa=8.2009P2=58kPa×8.2009P2=475.7kPa

Thus, the actual pressure of helium after the normal shock through the nozzle

 is 475.7kPa.

Since, (P1=P01)

Substitute 58kPa for P01 in Equation (XIV).

P0258kPa=10.389P2=58kPa×10.389P2=602.5kPa

Thus, the stagnation pressure of air after the normal shock though the nozzle

is 602.5kPa.

Refer Table A–1, “Molar mass, gas constant, and critical2point properties”, obtain

the value of k, and R for a temperature of 270K, and a pressure of 58kPa for helium as 1.667, and 2.0769kJ/kgK respectively.

Substitute 1.667 for k, 2.0769kJ/kgK for R, and 799.362K for T2 Equation (VII).

c2=1.667×2.0769kJ/kgK×799.362K=1663.59m/s

Substitute 0.5455 for Ma2, and 1663.59m/s for c2 in Equation (VIII).

V2=0.5455×1663.59m/s=907.5m/s

Thus, the velocity of air after the normal shock through the nozzle is 907.5m/s.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
Air flowing steadily in a nozzle experiences a normal shock at a Mach number of Ma = 2.6. If the pressure and temperature of air are 58 kPa and 270 K, respectively, upstream of the shock, calculate the pressure, temperature velocity, Mach number, and stagnation pressure downstream of the shock. Calculate the entropy changes of air and helium across the normal shock wave
Air flowing steadily in a nozzle experiences a normal shock at a Mach number of Ma = 2.5. If the pressure and temperature of air are 10.0 psia and 440.5 R, respectively, upstream of the shock, calculate the pressure, temperature, velocity, Mach number, and stagnation pressure downstream of the shock. Compare these results to those for helium undergoing a normal shock under the same conditions.
An ideal gas flows through a passage that first converges and then diverges during an adiabatic, reversible, steady-flow process. For supersonic flow at the inlet, sketch the variation of pressure, velocity, and Mach number along the length of the nozzle when the Mach number at the minimum flow area is equal to unity.

Chapter 17 Solutions

Thermodynamics: An Engineering Approach

Ch. 17.7 - Prob. 11PCh. 17.7 - Prob. 12PCh. 17.7 - Prob. 13PCh. 17.7 - Prob. 14PCh. 17.7 - Prob. 15PCh. 17.7 - Prob. 16PCh. 17.7 - Prob. 17PCh. 17.7 - Prob. 18PCh. 17.7 - Prob. 19PCh. 17.7 - Prob. 20PCh. 17.7 - Prob. 21PCh. 17.7 - Prob. 22PCh. 17.7 - Prob. 23PCh. 17.7 - Prob. 24PCh. 17.7 - Prob. 25PCh. 17.7 - Prob. 26PCh. 17.7 - The isentropic process for an ideal gas is...Ch. 17.7 - Is it possible to accelerate a gas to a supersonic...Ch. 17.7 - Prob. 29PCh. 17.7 - Prob. 30PCh. 17.7 - A gas initially at a supersonic velocity enters an...Ch. 17.7 - Prob. 32PCh. 17.7 - Prob. 33PCh. 17.7 - Prob. 34PCh. 17.7 - Prob. 35PCh. 17.7 - Prob. 36PCh. 17.7 - Prob. 37PCh. 17.7 - Air at 25 psia, 320F, and Mach number Ma = 0.7...Ch. 17.7 - Prob. 39PCh. 17.7 - Prob. 40PCh. 17.7 - Prob. 41PCh. 17.7 - Prob. 42PCh. 17.7 - Prob. 43PCh. 17.7 - Is it possible to accelerate a fluid to supersonic...Ch. 17.7 - Prob. 45PCh. 17.7 - Prob. 46PCh. 17.7 - Prob. 47PCh. 17.7 - Consider subsonic flow in a converging nozzle with...Ch. 17.7 - Consider a converging nozzle and a...Ch. 17.7 - Prob. 50PCh. 17.7 - Prob. 51PCh. 17.7 - Prob. 52PCh. 17.7 - Prob. 53PCh. 17.7 - Prob. 54PCh. 17.7 - Prob. 57PCh. 17.7 - Prob. 58PCh. 17.7 - Prob. 59PCh. 17.7 - Prob. 60PCh. 17.7 - Prob. 61PCh. 17.7 - Air enters a nozzle at 0.5 MPa, 420 K, and a...Ch. 17.7 - Prob. 63PCh. 17.7 - Are the isentropic relations of ideal gases...Ch. 17.7 - What do the states on the Fanno line and the...Ch. 17.7 - It is claimed that an oblique shock can be...Ch. 17.7 - Prob. 69PCh. 17.7 - Prob. 70PCh. 17.7 - For an oblique shock to occur, does the upstream...Ch. 17.7 - Prob. 72PCh. 17.7 - Prob. 73PCh. 17.7 - Prob. 74PCh. 17.7 - Prob. 75PCh. 17.7 - Prob. 76PCh. 17.7 - Prob. 77PCh. 17.7 - Prob. 78PCh. 17.7 - Prob. 79PCh. 17.7 - Air flowing steadily in a nozzle experiences a...Ch. 17.7 - Air enters a convergingdiverging nozzle of a...Ch. 17.7 - Prob. 84PCh. 17.7 - Prob. 85PCh. 17.7 - Consider the supersonic flow of air at upstream...Ch. 17.7 - Prob. 87PCh. 17.7 - Prob. 88PCh. 17.7 - Air flowing at 40 kPa, 210 K, and a Mach number of...Ch. 17.7 - Prob. 90PCh. 17.7 - Prob. 91PCh. 17.7 - Prob. 92PCh. 17.7 - What is the characteristic aspect of Rayleigh...Ch. 17.7 - Prob. 94PCh. 17.7 - Prob. 95PCh. 17.7 - What is the effect of heat gain and heat loss on...Ch. 17.7 - Consider subsonic Rayleigh flow of air with a Mach...Ch. 17.7 - Prob. 98PCh. 17.7 - Prob. 99PCh. 17.7 - Air is heated as it flows subsonically through a...Ch. 17.7 - Prob. 101PCh. 17.7 - Prob. 102PCh. 17.7 - Prob. 103PCh. 17.7 - Air enters a rectangular duct at T1 = 300 K, P1 =...Ch. 17.7 - Prob. 106PCh. 17.7 - Prob. 107PCh. 17.7 - Air is heated as it flows through a 6 in 6 in...Ch. 17.7 - What is supersaturation? Under what conditions...Ch. 17.7 - Steam enters a converging nozzle at 5.0 MPa and...Ch. 17.7 - Steam enters a convergingdiverging nozzle at 1 MPa...Ch. 17.7 - Prob. 112PCh. 17.7 - Prob. 113RPCh. 17.7 - Prob. 114RPCh. 17.7 - Prob. 115RPCh. 17.7 - Prob. 116RPCh. 17.7 - Prob. 118RPCh. 17.7 - Prob. 119RPCh. 17.7 - Using Eqs. 174, 1713, and 1714, verify that for...Ch. 17.7 - Prob. 121RPCh. 17.7 - Prob. 122RPCh. 17.7 - Prob. 123RPCh. 17.7 - Prob. 124RPCh. 17.7 - Prob. 125RPCh. 17.7 - Prob. 126RPCh. 17.7 - Nitrogen enters a convergingdiverging nozzle at...Ch. 17.7 - An aircraft flies with a Mach number Ma1 = 0.9 at...Ch. 17.7 - Prob. 129RPCh. 17.7 - Helium expands in a nozzle from 220 psia, 740 R,...Ch. 17.7 - Helium expands in a nozzle from 0.8 MPa, 500 K,...Ch. 17.7 - Air is heated as it flows subsonically through a...Ch. 17.7 - Air is heated as it flows subsonically through a...Ch. 17.7 - Prob. 134RPCh. 17.7 - Prob. 135RPCh. 17.7 - Air is cooled as it flows through a 30-cm-diameter...Ch. 17.7 - Saturated steam enters a convergingdiverging...Ch. 17.7 - Prob. 138RPCh. 17.7 - Prob. 145FEPCh. 17.7 - Prob. 146FEPCh. 17.7 - Prob. 147FEPCh. 17.7 - Prob. 148FEPCh. 17.7 - Prob. 149FEPCh. 17.7 - Prob. 150FEPCh. 17.7 - Prob. 151FEPCh. 17.7 - Prob. 152FEPCh. 17.7 - Consider gas flow through a convergingdiverging...Ch. 17.7 - Combustion gases with k = 1.33 enter a converging...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Intro to Compressible Flows — Lesson 1; Author: Ansys Learning;https://www.youtube.com/watch?v=OgR6j8TzA5Y;License: Standard Youtube License