Fundamentals of Heat and Mass Transfer
7th Edition
ISBN: 9780470501979
Author: Frank P. Incropera, David P. DeWitt, Theodore L. Bergman, Adrienne S. Lavine
Publisher: Wiley, John & Sons, Incorporated
expand_more
expand_more
format_list_bulleted
Textbook Question
Chapter 4, Problem 4S.1P
A long furnace. constructed from refractory brick with a thermal conductivity of
Expert Solution & Answer
Want to see the full answer?
Check out a sample textbook solutionStudents have asked these similar questions
Calculate the quantity of heat conducted per minute through a duralumin circular disc 119mm diameter and 22.65mm thick when the temperature drop across the thickness of the plate is 9.3°F take the coefficient of thermal conductivity of duralumin as 150 W/m-K.
Answer: 22.833 kJ/min
The cylindrical pipe with a thread diameter of 0.070 m and an internal diameter of 0.050 m is insulated both internally and externally. Calculate the heat loss per unit length of the pipe (1 m) when the inner surface temperature of the pipe is kept at 50 °C and the outer surface temperature at 20 °C (Average thermal conductivity constant = Km= 0.172 J/cm.s.K).
A 15 mm diameter cylindrical nuclear fuel rod is housed in a hollow ceramic cylinder concentric to the rod with an inner diameter of 35 mm and an outer diameter of 110 mm. This creates an air gap between the fuel rod and the hollow ceramic cylinder with a convective heat transfer coefficient of 10 W/m²·K. The hollow ceramic cylinder has a thermal conductivity of 0.07 W/m·K and its outer surface maintains a constant temperature of 30 °C. If the fuel rod generates heat at a rate of 1 MW/m³. Solving, the temperature at the surface of the fuel rod is 1026°C.
I need the solution with fundamental concepts (Textically with definitions) of how the heat flow behaves in the system. NOT THE MATHEMATICAL RESOLUTION. I already know how to solve it.
Chapter 4 Solutions
Fundamentals of Heat and Mass Transfer
Ch. 4 - In the method of separation of variables (Section...Ch. 4 - A two-dimensional rectangular plate is subjected...Ch. 4 - Consider the two-dimensional rectangular plate of...Ch. 4 - A two-dimensional rectangular plate is subjected...Ch. 4 - A two-dimensional rectangular plate is subjected...Ch. 4 - Using the thermal resistance relations developed...Ch. 4 - Free convection heat transfer is sometimes...Ch. 4 - Consider Problem 4.5 for the case where the plate...Ch. 4 - Prob. 4.9PCh. 4 - Based on the dimensionless conduction heat rates...
Ch. 4 - Determine the heat transfer rate between two...Ch. 4 - A two-dimensional object is subjected to...Ch. 4 - An electrical heater 100 mm long and 5 mm in...Ch. 4 - Two parallel pipelines spaced 0.5 m apart are...Ch. 4 - A small water droplet of diameter D=100m and...Ch. 4 - A tube of diameter 50 mm having a surface...Ch. 4 - Pressurized steam at 450K flows through a long,...Ch. 4 - The temperature distribution in laser-irradiated...Ch. 4 - Hot water at 85°C flows through a thin-walled...Ch. 4 - A furnace of cubical shape, with external...Ch. 4 - Laser beams are used to thermally process...Ch. 4 - A double-glazed window consists of two sheets of...Ch. 4 - A pipeline, used for the transport of crude oil,...Ch. 4 - A long power transmission cable is buried at a...Ch. 4 - A small device is used to measure the surface...Ch. 4 - A cubical glass melting furnace has exterior...Ch. 4 - An aluminum heat sink (k=240W/mK), used to cool an...Ch. 4 - Hot water is transported from a cogeneration power...Ch. 4 - A long constantan wire of 1-mm diameter is butt...Ch. 4 - A hole of diameter D=0.25m is drilled through the...Ch. 4 - In Chapter 3 we that, whenever fins are attached...Ch. 4 - An igloo is built in the shape of a hemisphere,...Ch. 4 - Prob. 4.34PCh. 4 - An electronic device, in the form of a disk 20 mm...Ch. 4 - The elemental unit of an air heater consists of a...Ch. 4 - Prob. 4.37PCh. 4 - Prob. 4.38PCh. 4 - Prob. 4.39PCh. 4 - Prob. 4.40PCh. 4 - One of the strengths of numerical methods is their...Ch. 4 - Determine expressionsfor...Ch. 4 - Consider heat transfer in a one-dimensional...Ch. 4 - In a two-dimensional cylindrical configuration,...Ch. 4 - Upper and lower surfaces of a bus bar are...Ch. 4 - Derive the nodal finite-difference equations for...Ch. 4 - Consider the nodal point 0 located on the boundary...Ch. 4 - Prob. 4.48PCh. 4 - Prob. 4.49PCh. 4 - Consider the network for a two-dimensional system...Ch. 4 - An ancient myth describes how a wooden ship was...Ch. 4 - Consider the square channel shown in the sketch...Ch. 4 - A long conducting rod of rectangular cross section...Ch. 4 - A flue passing hot exhaust gases has a square...Ch. 4 - Steady-state temperatures (K) at three nodal...Ch. 4 - Functionally graded materials are intentionally...Ch. 4 - Steady-state temperatures at selected nodal points...Ch. 4 - Consider an aluminum heat sink (k=240W/mK), such...Ch. 4 - Conduction within relatively complex geometries...Ch. 4 - Prob. 4.60PCh. 4 - The steady-state temperatures (°C) associated with...Ch. 4 - A steady-state, finite-difference analysis has...Ch. 4 - Prob. 4.63PCh. 4 - Prob. 4.64PCh. 4 - Consider a two-dimensional. straight triangular...Ch. 4 - A common arrangement for heating a large surface...Ch. 4 - A long, solid cylinder of diameter D=25mm is...Ch. 4 - Consider Problem 4.69. An engineer desires to...Ch. 4 - Prob. 4.71PCh. 4 - Prob. 4.72PCh. 4 - Prob. 4.73PCh. 4 - Refer to the two-dimensional rectangular plate of...Ch. 4 - The shape factor for conduction through the edge...Ch. 4 - Prob. 4.77PCh. 4 - A simplified representation for cooling in very...Ch. 4 - Prob. 4.84PCh. 4 - A long trapezoidal bar is subjected to uniform...Ch. 4 - Consider the system of Problem 4.54. The interior...Ch. 4 - A long furnace. constructed from refractory brick...Ch. 4 - A hot pipe is embedded eccentrically as shown in a...Ch. 4 - A hot liquid flows along a V-groove in a solid...Ch. 4 - Prob. 4S.5PCh. 4 - Hollow prismatic bars fabricated from plain carbon...
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.Similar questions
- 1.1 On a cold winter day, the outer surface of a 0.2-m-thick concrete wall of a warehouse is exposed to temperature of –5°C, while the inner surface is kept at 20°C. The thermal conductivity of the concrete is 1.2 W/m K. Determine the heat loss through the wall, which is 10-m long and 3-m high. Problem 1.1arrow_forwardDetermine the rate of heat transfer per meter length to a light oil flowing through a 2.5-cm-ID, 60-cm-long copper tube at a velocity of 0.03 m/s. The oil enters the tube at 16C, and the tube is heated by steam condensing on its outer surface at atmospheric pressure with a heat transfer coefficient of 11.3 kW/m K. The properties of the oil at various temperatures are listed in the following table: Temperature, T(C) 15 30 40 65 100 (kg/m3) 912 912 896 880 864 c(kJ/kgK) 1.80 1.84 1.925 2.0 2.135 k(W/mK) 0.133 0.133 0.131 0.129 0.128 (kg/ms) 0.089 0.0414 0.023 0.00786 0.0033 Pr 1204 573 338 122 55arrow_forwardA 15 mm diameter cylindrical nuclear fuel rod is housed in a hollow ceramic cylinder concentric to the rod with an inner diameter of 35 mm and an outer diameter of 110 mm. This creates an air gap between the fuel rod and the hollow ceramic cylinder with a convective heat transfer coefficient of 10 W/m²·K. The hollow ceramic cylinder has a thermal conductivity of 0.07 W/m·K and its outer surface maintains a constant temperature of 30 °C. If the fuel rod generates heat at a rate of 1 MW/m³. Solving, the temperature at the surface of the fuel rod is 1026°C. Explain how the heat flow behaves in the system, using the fundamental concepts.arrow_forward
- A 15 mm diameter cylindrical nuclear fuel rod is housed in a hollow ceramic cylinder concentric to the rod with an inner diameter of 35 mm and an outer diameter of 110 mm. This creates an air gap between the fuel rod and the hollow ceramic cylinder with a convective heat transfer coefficient of 10 W/m²·K. The hollow ceramic cylinder has a thermal conductivity of 0.07 W/m·K and its outer surface maintains a constant temperature of 30 °C. If the fuel rod generates heat at a rate of 1 MW/m³. Solving, the temperature at the surface of the fuel rod is 1026°C. Give the solution from fundamental concepts of how the heat flow behaves in the system.arrow_forwardA 15 mm diameter cylindrical nuclear fuel rod is housed in a hollow ceramic cylinder concentric to the rod with an inner diameter of 35 mm and an outer diameter of 110 mm. This creates an air gap between the fuel rod and the hollow ceramic cylinder with a convective heat transfer coefficient of 10 W/m²·K. The hollow ceramic cylinder has a thermal conductivity of 0.07 W/m·K and its outer surface maintains a constant temperature of 30 °C. If the fuel rod generates heat at a rate of 1 MW/m³. Determine the temperature at the surface of the fuel rod. Note: Give the solution from fundamental concepts of how the heat flow behaves in the systemarrow_forwardA horizontal pipe having a surface temperature of 67 °C and diameter of 25 cm is buried at a depth of 1.2 m in the earth at a location where k = 1.8 W/m-°C. The earth surface temperature is 15 °C. Calculate the shape factor if the pipe length is 10 m.arrow_forward
- A 50-meter-long cast iron pipe with a 10-centimeter outside diameter goes through a 288 K temperature open environment. The temperature of the pipe's outer surface is 423 K, and the combined heat transfer coefficient on the pipe's outside surface is 25 W/m2 K. Considering and stating the necessary assumptions determine, (5 marks) (a) The rate of heat loss from the pipe (b) The energy lost per year if the cost of the fuel is 0.52 $/therm ( 1 therm = 105,500 kJ) c) The thickness of the insulation if 98% of the energy loss is planned to be saved. Consider the conduction coefficient of the insulation is 0.035 W/mK.arrow_forwardConsider a closed cylindrical reactor vessel of diameter D= 1 ft, and length L= 1.5 ft. The surface temperature of the vessel, T1, and the surrounding temperature, T2, are 390 deg. F and 50 deg. F, respectively. The convective heat transfer coefficient, h, between the vessel wall and surrounding fluid is 4.0 Btu/h . ft . ⁰F. Calculate the thermal resistance in ⁰F .h/Btu.arrow_forwardOn a multi-layered square wall, the thermal resistance of the first layer is 0.005 ° C / W, the resistance of the second layer is 0.3 ° C / W, and the third layer is 0.1 ° C / W. The overall temperature gradient in the wall is multilayered from one side. to the other side is 50 ° C. a. Determine the heat flux through the walls. = Answer watts / m2. b. If the thermal resistance of the second layer is changed to 0.1 ° C / W, what is the effect in% on heat flux, assuming the temperature gradient remains the same? = AnswerAnswer %.arrow_forward
- On a multi-layered rectangular wall, the thermal resistance of the first layer is 0.005 ° C / W, the resistance of the second layer is 0.2 ° C / W, and the third layer is 0.1 ° C / W.The overall temperature gradient in the wall is multilayered from one side. to the other side is 50 ° C. a. Determine the heat flux through the walls. = Answer watts / m2. b. If the thermal resistance of the second layer is changed to 0.3 ° C / W, what is the effect in% on heat flux, assuming the temperature gradient remains the same? = AnswerAnswer %.arrow_forwardA 50-meter-long cast iron pipe with a 10-centimeter outside diameter goes through a 288 K temperature open environment. The temperature of the pipe's outer surface is 423 K, and the combined heat transfer coefficient on the pipe's outside surface is 25 W/m2 K. Considering and stating the necessary assumptions determine,(a) The rate of heat loss from the pipe (b) The energy lost per year if the cost of the fuel is 0.52 $/therm ( 1 therm = 105,500 kJ) c) The thickness of the insulation if 98% of the energy loss is planned to be saved. Consider the conduction coefficient of the insulation is 0.035 W/mK.arrow_forwardIn a multilayered rectangular wall, the thermal resistance of the first layer is 0.005 °C/W, the resistance of the second layer is 0.2° C/W, and for the third layer it is 0.1 ° C/W. The overall temperature gradient in the multilayered wall from one side to another is 70° C. a. Determine the heat flux through the wall. b. If the thermal resistance of the second layer is doubled to 0.4° C/W, what will be its influence in % on the heat flux, assuming the temperature gradient remains the same?arrow_forward
arrow_back_ios
SEE MORE QUESTIONS
arrow_forward_ios
Recommended textbooks for you
- Principles of Heat Transfer (Activate Learning wi...Mechanical EngineeringISBN:9781305387102Author:Kreith, Frank; Manglik, Raj M.Publisher:Cengage Learning
Principles of Heat Transfer (Activate Learning wi...
Mechanical Engineering
ISBN:9781305387102
Author:Kreith, Frank; Manglik, Raj M.
Publisher:Cengage Learning
Heat Transfer – Conduction, Convection and Radiation; Author: NG Science;https://www.youtube.com/watch?v=Me60Ti0E_rY;License: Standard youtube license