A Bottle roll test was conducted on 2 kg of a soil sample at 50% solids. 50 g of the tailings was digested with aqua-regia and topped to 10 ml. The data obtained after AAS is presented in Table 1. Find the head grade and percent recovery for each period and plot a suitable graph. Are there preg-robbers in the sample? Time, h Gold in solution, mg/l 1.75 4 1.52 8. 3.10 16 4.52 24 4.35 www.knust.edu.gh Activate Tailings 0.92 etti 26
Q: Which sentence is false about gravimetric analysis? a. It is used for inorganic b. It is used to…
A: The statement which is false about gravimetric analysis is, Relative precision 3% to 4%
Q: Put the steps in order to make 100 mL of 2.00×10-4M from 2.00×10-2 M solution of NaSCN. You have…
A: In order to prepare a 100 mL of 2.00×10-4 M, the given solution, 2.00 ×10-2 M is diluted. First the…
Q: already took
A: Dear student this question is related to Mathematical errors in chemistry.
Q: A variation of the indicator-dilution method (see preceding problem) is used to measure total blood…
A: The relationship which relates the calibration curve of absorbance (A) and tracer concentration (C)…
Q: 2. Several standards were chromatographed, 0.5 1.0 2.0 Conc (ug/ml) Peak area 5.0 10.1 17.2 and the…
A: The graph is to be plot by taking concentration(μg/mL) in X-axis and peak area in Y-axis.
Q: what is the biggest buret size that'll deliver 4.8mL with a relative error less than or equal to…
A: Answer - According to the question - Given - volume need to be delivered is 4.8 mL with an accuracy…
Q: In the vapor deposition method, solids are usually converted into solutions using their solvents. *…
A: A question based on general chemistry that is to be accomplished.
Q: 100 ml boiled cooled and filtered water sample takes 9.6 ml of M/50 EDTA in titration. The…
A: The hardness degree can be calculated in term of CaCO3 equivalent asDegree of Hardness=Wt. of…
Q: The concentration of chloride in seawater can be determined by a flow injection analysis. The…
A: To find concentration of Cl- in the sample at an absorbance of 0.443.
Q: The labware we used in Quant Lab is divided into “qualitative” or “quantitative” analytical purpose.…
A: We use many important lab apparatus while working in the lab. The instruments/apparatus used for…
Q: An instrumental method was validated by running an analysis on a standard solution with a known…
A: Accuracy: It is generally expressed by the percentage of error. Relative accuracy is the difference…
Q: 0.2 to 1.0 mg/ml: For each concentration, a volume of 1.0 mL should be prepared. How will you…
A: The volume of the solution that can be measured with 5-10 microliter pipette and 2-20 microliter…
Q: 1) determine the glassware that can be used to deliver 4.5mL with an absolute error: a) ≤ 0.15 mL…
A: Answer - Absolute error - The absolute value of the difference between an observed value of a…
Q: Classify whether the following is an Instrumental error, Method error, Personal error, Indeterminate…
A: Explanation of terms involved Instrumental error occurs when the calibration of an instrument is…
Q: The labware we used in Quant Lab is divided into “qualitative” or “quantitative” analytical purpose.…
A: “Since you have posted a question with multiple sub-parts, we will solve first Five subparts for…
Q: What is the summation of the deviation? If the best measured value is 5.25cm + 0.075cm. Complete the…
A:
Q: The melting point of various ratios of mixtures of urea and acetaminophen) were determined and the…
A: We will plot concentration (%) on y axis and melting point on x axis. Moreover, the melting point…
Q: Calculate the average and standard deviations for each solution (and solvent).
A:
Q: You are trying to determine the caffeine content of brand X coffee using HPLC-UV/VIS analysis. You…
A: Mean is the average of the numbers, i.e., add up all the numbers, then divide by how manynumbers…
Q: Felodipine calcium channel blocker standard (0.251mg/ml) and felodipine sample (0.245mg/ml)…
A: Given that: concentration of felodipine standard = 0.251mg/ml concentration of felodipine sample =…
Q: liquid
A: ✓Eluent is the portion of the mobile phase, which carries the sample components with it. In liquid…
Q: In a gravimetric chloride analysis, it was found that 0.82g AgCl and 0.80g AgCl was obtained from an…
A: Moles = mass / molecular mass molecular mass of AgCl = 108 + 35.5 = 143.5 => moles of AgCl in…
Q: 2. Boil I L of distilled water for 5 min to expel CO2. Pour the water into a polyethylene bottle,…
A:
Q: Classification Soft Moderately Hard Hard Very Hard mg/L or ppm 0-60 61-120 121-180 > 180 PROCEDURE:…
A:
Q: From a 10-mL sample, a 1-mL aliquot was taken and diluted to 100mL. From this, a 5-mL aliquot was…
A: The diluted conc. of any solution can be calculated by using the dilution formula:…
Q: A sample of drinking water was tested for Pb+ and was found to have a Pb²* concentration of 17.46…
A: Given the concentration of the unspiked sample, Cunspiked = 17.46 ppb Now 1.00 mL of 2.29 ppb Pb2+…
Q: 1) Suppose you use your calibrated 25-mL pipet twice to deliver “50 mL" liquid, what is the actual…
A: Since you have asked multiple questions, we will solve the first question for you. If you want any…
Q: Chemistry Yes or No: Topic - HPLC 1.We need the void time so that we have a measure of the retention…
A: Concepts of HPLC.
Q: The concentration of chloride in seawater can be determined by a flow injection analysis. The…
A: We are given Cl- concentration and absorbance data for calibration standards. We have to find Cl-…
Q: When answering this problem, report the answer with the appropriate number of significant figures.…
A: Given : Calibration curve equation : y = 21655 x + 0.0318 where y = Absorbance x = molar…
Q: tudent needs 25.0 mL of 9.60x10 e No. 6 stock solution to work with, how much of the 2.00 mM…
A: Formula used M1V1 = M2V2 where M= Molarity and V= volume
Q: The labware we used in Quant Lab is divided into “qualitative” or “quantitative” analytical purpose.…
A: The glassware used in the lab are divided into 2 types that is qualitative and quantitative. As it…
Q: 1. Standardization of Sodium Hydroxide Primary Standard used: Formula Mass of Primary Standard: %…
A: In the given question we have to do the standardization of NaOH and to calculate the required NaOH…
Q: The volume of the solution that can be measured with 5-10 microliter pipette and 2-20 microliter…
A: Volume of solution that is measured using a 20-200 microliter pipette is 0.02 mL to 0.2 mL. Hence,…
Q: Standardization of Sodium Thiosulfate Solution Primary Standard used: Potassium Dichromate…
A: The formula of potassium dichromate is K2Cr2O7
Q: A 5.12-g pesticide sample was decomposed and then dilute to 200-mL to determine its Cu2* contents.…
A: Absorbance: It is a measure of the quantity of light that is absorbed by the sample. It is also…
Q: During the course of an analysis for a solid sample, a loss of 0.40 mg occurs. Calculate the…
A: Relative error is defined as the ratio of absolute error to the true value. Here, Absolute error =…
Q: Caffeine eine benze, and aspartame content of mountain dew soda was determined using reverse phase…
A: Given: Concentration of standard Caffeine used = 0.70 mg/mL Concentration of standard Benzoate used…
Q: In a chromatography experiment, a solution containing 0.083 7 M X and 0.066 6 M S gave peak areas of…
A: The equation to calculate the concentration of unknown using internal standard from a chromatogram…
Q: Caffeine, benzoate, and aspartame content of mountain dew soda was determined using reverse phase…
A: Given: Concentration of standard Caffeine used = 0.70 mg/mL Concentration of standard Benzoate used…
Q: The concentration of caffeine in an energy soft drink was determined by standard addition using…
A: Given, mass of caffeine = 0.09850 g area of water =25.0 cm3
Q: Table 2. Data on Sample Analysis Volume of water sample (mL) : 10.00mL Trial Volume of EDTA (mL) ppm…
A:
Q: 2. A water sample from a local cave system was tested for total water hardness. An EDTA titer was…
A: The question is based on the concept of complexometric titrations. We have to calculate hardness of…
Q: You are provided with a stock standard with a concentration of 100 mg/L, and a solution of unknown…
A: A question based on absorption that is to be accomplished.
Q: Retention time is the time taken for the mobile phase to reach the detector. True False
A: Answer - The above statement is false Explanation - Retention time - Retention time is the sum of…
Q: Categorize each as a determinate or an indeterminate error and further classify determinate errors…
A: A question based on tools in analytical chemistry that is to be accomplished.
Q: Caffeine, benzoate, and aspartame content of mountain dew soda was determined using reverse phase…
A: The concentration of aspartame is 5.0 mg/mL.
Q: ASSAY Calibration solutions Calibration solutions of naproxen in the range 5 – 25 μg/mL were…
A: Solution- Data given- 12.3819 g were crushed to a fine powder, acetic acid (0.05 M)
Q: You have a stock solution certified by a manufacturer to contain 220.0 + 0.4 ug So /ml. You would…
A: Method A: Dilution of 10.00 mL (transfer pipet) 215.0 g/mL stock solution to 100 mL (vloumetric…
Q: Trial final burette reading (mL) initial burette reading (mL) volume of NaOH(aq) added (mL) colour…
A:
Trending now
This is a popular solution!
Step by step
Solved in 2 steps with 2 images
- I got a task in analytical chemistry to calibrate, standardize, verify and validate an analytical balancesThe concentration of purified OXA-M290 is tested with a BCA assay. Serial dilutions of a bovine serum albumin (BSA) stock solution are prepared, then pipetted into a 96-well plate; each dilution of the BSA standard is tested in triplicate. Then, bicinchoninic acid and Cu2+ ions are added to all of the wells of the plate. After incubating the plate for 1 hour, a microplate reader is used to measure the absorbance of all of the wells in the plate at 560 nm. This generates the following data: BSA conc. (μg/mL), Replicate 1 Absorbance, Replicate 2 Absorbance, Replicate 3 Absorbance 40, 1.360, 1.403, 1.481 20, 0.750, 0.745, 0.810 10, 0.380, 0.344, 0.398 5, 0.198, 0.160, 0.183 2.5, 0.090, 0.100, 0.085 1.25, 0.038, 0.043, 0.051 0.625, 0.024, 0.028, 0.019 Prepare a calibration curve using these data. You can use Excel, R, SPSS or an equivalent graphing software. In this graph, plot absorbance (y-axis) against the concentration of the protein standard (x-axis). Calculate and plot…Which sentence is false about gravimetric analysis? a. It is used for inorganic b. It is used to assay barium c. It is used to assay of d. Relative precision 3% to 4%
- A new method is proposed to simultaneously detectand separatefour foodadditives by reversed-phase liquid chromatography. The data were obtained using theliquid chromatographic column with a flow rate of 0.5 mL per min and with the followingparameters: Pore size 100 A Particle Size 3.5 Internal diameter 4.6 mm Length 150 mm The food additives found in the sample resulted in the following data: ( see image for table) a.Calculate the number of plates from each peak. b.Calculate the plate height for the column. c.Retention factor for each peak.A fly ash aerosol of monodisperse particles with a density of 2.0 g/mL and particle diameter of 10.0 mm has a concentration of 1000.0 mg/m3. Calculate the settling velocity in cm/s and the settling rate in g/m2-s. Please answer very soon will give rating surelyASSAY Calibration solutions Calibration solutions of naproxen in the range 5 – 25 μg/mL were prepared. Sample preparation 20 tablets weighing 12.3819 g were crushed to a fine powder. A portion of the powder (145.4 mg) was shaken with approximately 150 mL of acetic acid (0.05 M) for 5 min and then made up to volume in a 250 mL volumetric flask (stock solution). Approximately 50 mL of the stock solution was filtered and a 25 mL aliquot was diluted to 100 mL in a volumetric flask. 10 mL of the resulting solution was further diluted to 100 mL with acetic acid (0.05 M). Analysis The standards and sample solutions were analyzed by HPLC under the following conditions: Column: octadecylsilyl (ODS), 4.6 mmx150 mm, mobile phase: acetonitrile : 0.05 M acetic acid (85:15), flow rate: 1 ml/min, UV detection at 243 nm. Results: A calibration curve of concentration versus peak area was constructed for the standard solutions and gave the straight-line equation: y = 3555.6x + 85, r = 0.9999 The area…
- An analyst determines the Cl^- content of rain water with ion chromatography. The data for the calibration line in the range 5 to 50 milli equivalents per liter (mEq/L) is shown in the table below. Additionally, a blank sample was analysed 5 times and the following results obtained: 1.1, 0.5, 0.1, 0.9 and 1.2 ppm Ct Calculate the detection limit (DL) for the method with a 98.3% confidence level. Use ALL data and show equationsCan you please fill the rest of tghe data based on the on inforamtion you have and answer Average percent by mass of acetic acid in vinegar sample (%) ________________ Standard deviation of percent by mass of acetic acid in vinegar sample (%)Blank determinations reveal errors due to interfering contaminants from the reaagents and vessels employed in the analysis.
- A 10-ml transfer pipet and a 200-ml volumetric flask (TC) are used to make 0.100 M and 0.0050 M solutions from a stock solution of 2.000(plus or minus) 0.005 M. Calculate the percent relative error for the three solutions if perfect technique is used. (See Garland Experiments in Physical Chemistry, 10th ed. p. 639-642) Report the two new molarititesStandardization of Sodium Thiosulfate Solution Primary Standard used: Potassium Dichromate Formula mass of 1o standard: __________________ % Purity of 1o standard: 99.80% Trials 1 2 3 Weight of K2Cr2O7 (g)Weight of K2Cr2O7 (g) 0.0315 0.0331 0.0380 Final Volume Reading Na2S2O3 (ml) 27.50 27.50 34.90 Initial Volume Reading Na2S2O3 (ml) 1.10 0.00 1.00 Net Volume Na2S2O3 used (ml) Molarity of Na2S2O3You are provided with a stock standard with a concentration of 100 mg/L, and a solution of unknown concentration. Prepare calibration standards using a 10 mL volumetric flask and a 1 mL piston pipette, and measure on the UV/Vis spectrophotometer (400 nm). Determine the concentration of the unknown after a 1:40 dilution, and provide the concentration of the initial solution. i need to learn how to do the calculations and draw a calibration curve to find concentration of unknown sample after i find the absorbances.