15.5 mg of Anthracene was dissolved in 200 mL of cyclohexane to prepare the stock solution. 10 mL of the stock solution was transferred to a 1000 mL volumetric flask and made up to the mark with cyclohexane. The concentration of the diluted Anthracene solution was measured by Fluorescence spectroscopy and showed to be 740 ppb. Calculate the % error

15.5 mg of Anthracene was dissolved in 200 mL of cyclohexane to prepare the stock solution. 10 mL of the stock solution was transferred to a 1000 mL volumetric flask and made up to the mark with cyclohexane. The concentration of the diluted Anthracene solution was measured by Fluorescence spectroscopy and showed to be 740 ppb. Calculate the % error

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter28: Atomic Spectroscopy

Section: Chapter Questions

Problem 28.13QAP

See similar textbooks

Similar questions

Why is glass better than fused silica as a prism construction material for a monochromator to be used in the region of 400 to 80 nm?
A 0.0200 gram blood sample was decomposed by a microwave digestion technique followed by dilution to 100.0 mL in a volumetric flask. Aliquots of the sample solution were treated with a lead complexing reagent and water as follows: Solution 1: 10.0 ml blood sample + 20.0 mL complexing agent + 30.0 mL H20. Solution 2: 10.0 ml blood sample + 20.0 mL complexing agent + 26.0 mL H20 + 4.00 mL of 78 ppb Pb2+ standard. The resulting solutions were analyzed by UV/Vis at 375 nm. Absorbance for solution 1 = 0.155 and for solution 2 = 0.216. Calculate the concentration of lead (ppb) in the original sample.
A 5.00-mL sample of blood was treated with trichloroacetic acid to precipitate proteins. After centrifugation, the resulting solution was brought to pH 3 and extracted with two 5-mL portions of methyl isobutyl ketone containing the lead-complexing agent APCD. The extract was aspirated directly into an air/acetylene flame and yielded an absorbance of 0.527 at 283.3 nm. Five-milliliter aliquots of standard solutions containing 0.400 and 0.600 ppm of lead were treated in the same way and yielded absorbances of 0.396 and 0.599. Find the concentration of lead in the sample in ppm assuming that Beer’s law is followed.
A 5.00-mL sample of blood was treated with trichloroacetic acid to precipitate proteins. After centrifugation, the resulting solution was brought to pH 3 and extracted with two 5-mL portions of methyl isobutyl ketone containing the lead-complexing agent APCD. The extract was aspirated directly into an air/acetylene flame and yielded an absorbance of 0.569 at 283.3 nm. Five-milliliter aliquots of standard solutions containing 0.400 and 0.600 ppm of lead were treated in the same way and yielded absorbances of 0.396 and 0.599. Please calculate the concentration of lead in the sample in ppm.
A juice concentrate was colorimetrically assayed using Nelson’s test. One milliliter (1.00 mL) of the sample solution and various concentrations of the standard glucose solution were treated with freshly prepared Nelson’s reagent and arsenomolybdate reagent and then diluted to 10.0 mL separately in properly labeled test tubes. Absorbances at 480 nm for distilled water, glucose standard, and for the sample are 0.052, 1.702, and 0.926, respectively. What is the reducing sugar concentration (mg/mL) in the juice concentrate? The equation of the line was plotted to be: y = 1.6656x - 0.0885 0.578 mg/mL 577.9 mg/mL 57.7 mg/mL 5.78 mg/mL
1.17g of indole, 5mL DMF, 1.7g POCl3 are used in the experiment. Calculate the limiting reagent and the theoretical yield.
The detecton limits reported for Al with ICP-AES and GF-AAS are 2 ppb and 5 picograms, respectivly. If we assume that a 20 microliter sample volume is used for the GF-AAS determination, which method has the lower detection limit? (1 picogram = 10-12 gram.)
Nick and Kel reacted 2.80g of NiCl2 x 6H20 with 7.00 ml of 4.00 M C2H8N2. They recovered 2.40g of product, [Ni(C2H8N2)3] Cl2. At the end, the filtrate was a dark blue solution. The litmus test on the filtrate solution left the red litmus paper unchanged in color. - NiCl2 x 6H2O + 3C2H8N2 yields [Ni(C2H8N2)3] Cl2(s) + 6H20 - Molor mass of NiCl2 x 6H20 is 237.69 g/mol - Molarity of C2H8N2 is 4.00 M - Molor mass of product,[Ni(C2H8N2)3] Cl2(s) is 309.90 g/mol based on the experiment described, what are answers for the question below the actual or experimenting yield is ________ the theoretical yeild is _____
Nick and Kel reacted 2.80g of NiCl2 x 6H20 with 7.00 ml of 4.00 M C2H8N2. They recovered 2.40g of product, [Ni(C2H8N2)3] Cl2. At the end, the filtrate was a dark blue solution. The litmus test on the filtrate solution left the red litmus paper unchanged in color. - NiCl2 x 6H2O + 3C2H8N2 yields [Ni(C2H8N2)3] Cl2(s) + 6H20 - Molor mass of NiCl2 x 6H20 is 237.69 g/mol - Molarity of C2H8N2 is 4.00 M - Molor mass of product,[Ni(C2H8N2)3] Cl2(s) is 309.90 g/mol based on the experiment described, what are answers for the question below the actual or experimenting yield is __2.40g______ the theoretical yeild is __2.89g___ (can someone show me how to caluculate to get this answer?)
0.56 g 1,4‐dimethoxybenzene, 0.9 mL 2‐chloro‐2‐methylpropane, 5 mL nitrobenzene and 0.52 g graphite were combined, and the mixture was refluxed for 1.5 hours. It was then cooled to room temperature and filtered. The filtered graphite was washed with 15 mL hexane. The filtrate was distilled under vacuum to remove any remaining 1,4‐dimethoxybenzene, 2‐chloro‐2‐ methylpropane and nitrobenzene (6.3 g), yielding 0.44 g 1,4‐di‐tert‐butyl‐2,5‐dimethoxybenzene (43.4% yield). What is the Atom economy, E factor, and effective mass yield?
One common way to determine phosphorous in urine is to treat the sample after removing the protein with molybdenum (VI) and then reducing the resulting 12-molybdophosphate complex with ascorbic acid to give an intense blue-coloured species called molybdenum blue. The absorbance of molybdenum blue can be measured at 650 nm. A 24-hour urine sample was collected, and the patient produced 1122 mL in 24 hours. A 1.00 mL aliquot of the sample was treated with Mo (VI) and ascorbic acid and diluted to a volume of 50.00 mL A calibration curve was prepared by treating 1.00 mL aliquot of phosphate standard solution in the same manner as the urine sample. The absorbances of the standards and the urine sample were obtained at 650 nm and the following results were obtained. ppm, P aBSORBANCE (A) 1.003.00 0.230 2.00 0.436 3.00 0.638 4.00 0.848 Urine sample 0.518 ffind the slope and intercept, then graph it.
how much iron ore (that assays at 33.8% fe) must be used in an analytical procedure that is known to have a low bias of -0.15g if an overall relative error of 2.09 ppth in the iron content is desired