![Fundamentals Of Engineering Thermodynamics](https://www.bartleby.com/isbn_cover_images/9781119391388/9781119391388_largeCoverImage.jpg)
Fundamentals Of Engineering Thermodynamics
9th Edition
ISBN: 9781119391388
Author: MORAN, Michael J., SHAPIRO, Howard N., Boettner, Daisie D., Bailey, Margaret B.
Publisher: Wiley,
expand_more
expand_more
format_list_bulleted
Question
Chapter 4, Problem 4.19CU
To determine
The velocity of the air at the exit of the diffuser.
Expert Solution & Answer
![Check Mark](/static/check-mark.png)
Want to see the full answer?
Check out a sample textbook solution![Blurred answer](/static/blurred-answer.jpg)
Students have asked these similar questions
3. During a reversible process there are abstracted 320KJ/s of heat from 1.23kg/s of a certain
gas, with Cp=2.232 and Cv= 1.713 Kj/Kg-K, while the temp remains constant at 27 C. the initial
pressure is 600 Kpa. For steady flow system (AKE= 10kj/s) determine;
a. Initial and final volume flow
b. Change in internal energy and enthalpy
c. Change in entropy
d. Work.
An ideal gas at 15 lbf/in2, 77°F flows horizontally at 516 ft/s into an adiabatic diffuser. It exits at 28 ft/s. Assume the heat capacity of the gas is constant.a. Determine the change in specific enthalpy (in Btu/lbm) and the outlet temperature if the gas is He.b. Repeat for R-125.c. Repeat for ozone (O3), which has a Molecular Mass of 47.9982 and a Cv0 of 0.1538 Btu/(lbm∙°R).
1. A horizontal "hot air blower" consists of a fan, an electrical heating element and a nozzleThe power input to the fan is 50 J/s and the power input to the heating element is 1.44 kJ/s. The air enters the fan with negligible velocity at a pressure of 1 bar and a temperature of 20 C, the volumetric flow rate being 0.5 m3/min. After passing over the heating element, the air leaves the nozzle with a velocity of 25 m/s and a pressure of 1.1 bar. Treating the complete arrangement as a steady flow system and ignoring any heat loss from the system, determine: (a) The mass flow rate of air entering the fan in kg per second(b) The kinetic energy of the air leaving the nozzle per second(c) The change in enthalpy of the air occurring per second between entering the fan and leaving the nozzle(d) The temperature of the air as it leaves the nozzle.(e) The density of the air as it leaves the nozzle(f) The flow area at the nozzle exit.Take R = 0.287 kJ/kgK and cp = 1.005 kJ/kgK
Chapter 4 Solutions
Fundamentals Of Engineering Thermodynamics
Ch. 4 - Prob. 4.1ECh. 4 - Prob. 4.2ECh. 4 - Prob. 4.3ECh. 4 - Prob. 4.4ECh. 4 - Prob. 4.5ECh. 4 - Prob. 4.6ECh. 4 - Prob. 4.7ECh. 4 - Prob. 4.8ECh. 4 - Prob. 4.9ECh. 4 - Prob. 4.10E
Ch. 4 - Prob. 4.11ECh. 4 - Prob. 4.12ECh. 4 - Prob. 4.13ECh. 4 - Prob. 4.14ECh. 4 - Prob. 4.15ECh. 4 - Prob. 4.1CUCh. 4 - Prob. 4.2CUCh. 4 - Prob. 4.3CUCh. 4 - Prob. 4.4CUCh. 4 - Prob. 4.5CUCh. 4 - Prob. 4.6CUCh. 4 - Prob. 4.7CUCh. 4 - Prob. 4.8CUCh. 4 - Prob. 4.9CUCh. 4 - Prob. 4.10CUCh. 4 - Prob. 4.11CUCh. 4 - Prob. 4.12CUCh. 4 - Prob. 4.13CUCh. 4 - Prob. 4.14CUCh. 4 - Prob. 4.15CUCh. 4 - Prob. 4.16CUCh. 4 - Prob. 4.17CUCh. 4 - Prob. 4.18CUCh. 4 - Prob. 4.19CUCh. 4 - Prob. 4.20CUCh. 4 - Prob. 4.21CUCh. 4 - Prob. 4.22CUCh. 4 - Prob. 4.23CUCh. 4 - Prob. 4.24CUCh. 4 - Prob. 4.25CUCh. 4 - Prob. 4.26CUCh. 4 - Prob. 4.27CUCh. 4 - Prob. 4.28CUCh. 4 - Prob. 4.29CUCh. 4 - Prob. 4.30CUCh. 4 - Prob. 4.31CUCh. 4 - Prob. 4.32CUCh. 4 - Prob. 4.33CUCh. 4 - Prob. 4.34CUCh. 4 - Prob. 4.35CUCh. 4 - Prob. 4.36CUCh. 4 - Prob. 4.37CUCh. 4 - Prob. 4.38CUCh. 4 - Prob. 4.39CUCh. 4 - Prob. 4.40CUCh. 4 - Prob. 4.41CUCh. 4 - Prob. 4.42CUCh. 4 - Prob. 4.43CUCh. 4 - Prob. 4.44CUCh. 4 - Prob. 4.45CUCh. 4 - Prob. 4.46CUCh. 4 - Prob. 4.47CUCh. 4 - Prob. 4.48CUCh. 4 - Prob. 4.49CUCh. 4 - Prob. 4.50CUCh. 4 - Prob. 4.51CUCh. 4 - Prob. 4.1PCh. 4 - Prob. 4.2PCh. 4 - Prob. 4.3PCh. 4 - Prob. 4.4PCh. 4 - Prob. 4.5PCh. 4 - Prob. 4.6PCh. 4 - Prob. 4.7PCh. 4 - Prob. 4.8PCh. 4 - Prob. 4.9PCh. 4 - Prob. 4.10PCh. 4 - Prob. 4.11PCh. 4 - Prob. 4.12PCh. 4 - Prob. 4.13PCh. 4 - Prob. 4.14PCh. 4 - Prob. 4.15PCh. 4 - Prob. 4.16PCh. 4 - Prob. 4.17PCh. 4 - Prob. 4.18PCh. 4 - Prob. 4.19PCh. 4 - Prob. 4.20PCh. 4 - Prob. 4.21PCh. 4 - Prob. 4.22PCh. 4 - Prob. 4.23PCh. 4 - Prob. 4.24PCh. 4 - Prob. 4.25PCh. 4 - Prob. 4.26PCh. 4 - Prob. 4.27PCh. 4 - Prob. 4.28PCh. 4 - Prob. 4.29PCh. 4 - Prob. 4.30PCh. 4 - Prob. 4.31PCh. 4 - Prob. 4.32PCh. 4 - Prob. 4.33PCh. 4 - Prob. 4.34PCh. 4 - Prob. 4.35PCh. 4 - Prob. 4.36PCh. 4 - Prob. 4.37PCh. 4 - Prob. 4.38PCh. 4 - Prob. 4.39PCh. 4 - Prob. 4.40PCh. 4 - Prob. 4.41PCh. 4 - Prob. 4.42PCh. 4 - Prob. 4.43PCh. 4 - Prob. 4.44PCh. 4 - Prob. 4.45PCh. 4 - Prob. 4.46PCh. 4 - Prob. 4.47PCh. 4 - Prob. 4.48PCh. 4 - Prob. 4.49PCh. 4 - Prob. 4.50PCh. 4 - Prob. 4.51PCh. 4 - Prob. 4.52PCh. 4 - Prob. 4.53PCh. 4 - Prob. 4.54PCh. 4 - Prob. 4.55PCh. 4 - Prob. 4.56PCh. 4 - Prob. 4.57PCh. 4 - Prob. 4.58PCh. 4 - Prob. 4.59PCh. 4 - Prob. 4.60PCh. 4 - Prob. 4.61PCh. 4 - Prob. 4.62PCh. 4 - Prob. 4.63PCh. 4 - Prob. 4.64PCh. 4 - Prob. 4.65PCh. 4 - Prob. 4.66PCh. 4 - Prob. 4.67PCh. 4 - Prob. 4.68PCh. 4 - Prob. 4.69PCh. 4 - Prob. 4.70PCh. 4 - Prob. 4.71PCh. 4 - Prob. 4.72PCh. 4 - Prob. 4.73PCh. 4 - Prob. 4.74PCh. 4 - Prob. 4.75PCh. 4 - Prob. 4.76PCh. 4 - Prob. 4.77PCh. 4 - Prob. 4.78PCh. 4 - Prob. 4.79PCh. 4 - Prob. 4.80PCh. 4 - Prob. 4.81PCh. 4 - Prob. 4.82PCh. 4 - Prob. 4.83PCh. 4 - Prob. 4.84PCh. 4 - Prob. 4.85PCh. 4 - Prob. 4.86PCh. 4 - Prob. 4.87PCh. 4 - Prob. 4.88P
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.Similar questions
- a. Air at 8 bar 100°C flows in a duct of 15 cm diameter at rate of 150 kg/min. It is throttled by upto 4 bar pressure. Determine the velocity of air after throttling and also show that enthalpy constant before and after throttling. b, Ans. 37.8 m/s 1. Determine the power required by a compressor designed to compress atmospheric through inlet area of 90 cm? with velocity of 50 m/s and leaves with velocity of 120 m/s from exit area of 5 cm?. Consider heat losses to environment to be 10% of power input to compressor. Ans. 50.4 kw C' Determine the power available from a steam turbine with following details; Steam flow rate = 1 kg/s Velocity at inlet and exit = 100 m/s and 150 m/s Enthalpy at inlet and exit = 2900 kJ/kg, 1600 k]/kg Change in potential energy may be assumed negligible. Ans. 1293.75 kw d. Determine the heat transfer in emptying of a rigid tank of 1 m² volume containing air at 3 bar and 27°C initially. Air is allowed to escape slowly by opening a valve until the pressure in…arrow_forwardSteam @ 500 C and 3500 kPa enters a nozzle at a velocity of 30 m/s and leaves as saturated vapor at 100 kPa, steam experiences a heat loss of 128 kg/ş to the surroundings which are at 25 C. What is the amount of entropy generation (kJ/kg.K)? Select one: A. 0.6291 B. 0.5473 C. 0.2299 D. 0.7424 E. 0.1996arrow_forwardbläi 10 Air flows at a rate of 0.4 kg/s through an air compressor entering at 6 m/s, 1 bar and 0.85 m^3/kg and leaving at 4.5 m/s, 6.9 bar and 0.16 m^3/kg. the internal energy of the air leaving is greater than that of entering air by 88 kJ/kg, cooling water in the jacket surrounding the cylinder absorbs heat from the air at the rate of 59 kJ/s. find the power required to drive the * .compressor -204.35 kw O - 104.35 kw - 101.35 kw O 105.35 kw Oarrow_forward
- Turbines, compressors, boilers, condensers, and heat exchangers operate for long periods of time under the same conditions, and they are classified as __________ flow devices.arrow_forwardA turbine, operating under steady-flow conditions, receives X1 kg of steam per hour (For X1 refer Table. 1). The steam enters the turbine at a velocity of 3000 m/min, an elevation of 5 m and a specific enthalpy of 2787 kJ/kg. It leaves the turbine at a velocity of 6000 m/min, an elevation of 1 m and a specific enthalpy of 2259 kJ/kg. Heat losses from the turbine to the surroundings amount to 16736 kJ/h. Determine the power output of the turbine.arrow_forwardHot combustion gases, modeled as air behaving as an ideal gas, enter a turbine at 145 Ibf/in.?, 2700°R with a mass flow rate of 0.82 lb/s and exit at 29 Ibf/in.? and 1620°R. If heat transfer from the turbine to its surroundings occurs at a rate of 52.18 Btu/s, determine the power output of the turbine, in hp. Wev = hparrow_forward
- An AC with a heat transfer rate of 55000 BTU/HR from air @14.7 psia and 95 degrees F, with rate of 1500 ft3/min. Refrigerant 134a is used and evaporates at a constant pressure of 50 psia from compressed liquid conditions, 30F, to exit temperature of 50 F. For air, Cp=0.24 Btu/lbm-R and Rair=53.3 ft-lbf/lbm-R; Determine the mass-flow-rate of liquid refrigerant required and the exit temperature of the air. Sorry for the missing infoarrow_forwardA power plant operates in an idealized Rankine cycle, using water as the working fluid (Figure 3). The steam at the exit of the boiler has a pressure of 6 MPa and temperature of 600 °C (point 1). The water at the exit of the condenser has a pressure of 15 kPa (point 3). The condenser employs a nearby river as the cooling source, which can be regarded to have a constant temperature of 25 °C. The mass flow rate of the steam is 80 kg/s. The hot reservoir has a temperature of 1400 K. Regard water as an incompressible liquid. During pumping, the density of water remains unchanged as Point 3 in Figure 3. Qin Boiler i wwwwww Pump Turbine Wp 3 Figure 3 W₁ Cooling water Condenserarrow_forwardIt generates power in a process consisting of air compressor-heat exchanger and turbine units. Air is considered the ideal gas. The compressor and turbine are adiabatic and the kinetic and potential energy changes in the units are negligible. The specific heat of the air is 1,005 kJ / kgK, k = 1,4. Accordingly, how many kW is the compressor power?, ps: ısı ejanşörü = heat exchanger kompresör= compressor türbin = turbinearrow_forward
- Determine the mass flow rate of a steam turbine if the inlet conditions are as follow T = 400 C and P = 3000 %3D %3D kPa. The fluid leaves the turbine at 70 kPa and 160 C. The output power of turbine is equal to 1200000 W. O a. 2.8 kg/s O b. 9.32 kg/h O. 12.74 kg/s O d. 10.9 kg/harrow_forwardSeparate streams of air and water flow through the compressor and heat exchanger arrangement shown in the figure below, where m˙1= 0.6 kg/s and T6= 50°C. Steady-state operating data are provided on the figure. Heat transfer with the surroundings can be neglected, as can all kinetic and potential energy effects. The air is modeled as an ideal gas. Determine:(a) the total power for both compressors, in kW.(b) the mass flow rate of the water, in kg/s.arrow_forward2. Air as ideal gas enters a compressor at inlet pressure 96 kPa, T₁ = 27C and volumetric flow rate is 26.91 m³/min and exits at 230 kPa and 127C. It is then cooled to 77C in heat exchanger which uses water with an inlet temperature at 25C and outlet temperature 40C. Determine (a) the compresor, in kW, and the mass flow rate of the cooling water, in kg/s (b) the rates of entropy production, each in kW/K, for the compressor and the heat exchanger.arrow_forward
arrow_back_ios
SEE MORE QUESTIONS
arrow_forward_ios
Recommended textbooks for you
- Elements Of ElectromagneticsMechanical EngineeringISBN:9780190698614Author:Sadiku, Matthew N. O.Publisher:Oxford University PressMechanics of Materials (10th Edition)Mechanical EngineeringISBN:9780134319650Author:Russell C. HibbelerPublisher:PEARSONThermodynamics: An Engineering ApproachMechanical EngineeringISBN:9781259822674Author:Yunus A. Cengel Dr., Michael A. BolesPublisher:McGraw-Hill Education
- Control Systems EngineeringMechanical EngineeringISBN:9781118170519Author:Norman S. NisePublisher:WILEYMechanics of Materials (MindTap Course List)Mechanical EngineeringISBN:9781337093347Author:Barry J. Goodno, James M. GerePublisher:Cengage LearningEngineering Mechanics: StaticsMechanical EngineeringISBN:9781118807330Author:James L. Meriam, L. G. Kraige, J. N. BoltonPublisher:WILEY
![Text book image](https://www.bartleby.com/isbn_cover_images/9780190698614/9780190698614_smallCoverImage.gif)
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
![Text book image](https://www.bartleby.com/isbn_cover_images/9780134319650/9780134319650_smallCoverImage.gif)
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
![Text book image](https://www.bartleby.com/isbn_cover_images/9781259822674/9781259822674_smallCoverImage.gif)
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
![Text book image](https://www.bartleby.com/isbn_cover_images/9781118170519/9781118170519_smallCoverImage.gif)
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
![Text book image](https://www.bartleby.com/isbn_cover_images/9781337093347/9781337093347_smallCoverImage.gif)
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
![Text book image](https://www.bartleby.com/isbn_cover_images/9781118807330/9781118807330_smallCoverImage.gif)
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Thermodynamic Availability, What is?; Author: MechanicaLEi;https://www.youtube.com/watch?v=-04oxjgS99w;License: Standard Youtube License