EBK ELEMENTARY PRINCIPLES OF CHEMICAL P
4th Edition
ISBN: 9781119192107
Author: BULLARD
Publisher: JOHN WILEY+SONS,INC.-CONSIGNMENT
expand_more
expand_more
format_list_bulleted
Videos
Textbook Question
Chapter 9, Problem 9.18P
Carbon monoxide at 25°C and steam at 150°C are fed to a continuous water-gas shift reactor. The product gas, which contains 40.0 mole% H2, 40.0% CO2, and the balance H2O(v), emerges at 500°C at a rate of 3.50 SCMH (standard cubic meters per hour) and goes to a condenser. The gas and liquid streams leaving the condenser are in equilibrium at 15°C and 1 atm. The liquid may be taken to be pure water (no dissolved gases).
- Calculate the percent excess steam fed to the reactor and the rate of condensation of the water (kg/h).
Expert Solution & Answer
Learn your wayIncludes step-by-step video
schedule05:03
Students have asked these similar questions
The synthesis of methanol from carbon monoxide and hydrogen is carried out in a continuous vapor-phase reactor at 5.00 atm
absolute.
The feed contains cO and H2 in stoichiometric proportion and enters the reactor at 25.0°C and 5.00 atm at a rate of 31.1 m³/h.
The product stream emerges from the reactor at 157°C.
The rate of heat transfer from the reactor is 21.0 kW.
Calculate the fractional conversion (0 to 1) of carbon monoxide achieved and the volumetric flow rate (m3/h) of the product stream.
f =
Vout
! m3/h
The n-butane is converted into isobutane in an isomerization reactor, which operates isothermally at 149°C. Suppose that the reactor is fed with a mixture containing 93% mole of n-butane, 5% isobutane and 2% HCl at 149°C and that a 40% conversion of n-butane is achieved. How much heat in KJ/m3 (STP) of the feed, should be supplied or extracted from the reactor?
The boiler in an apartment building uses propane (C3H8) to heat
water that circulates throughout the building as steam. 1.00
m'/s of propane gas at 25°C and 1 atm is combusted with 10%
excess air at 25°C and 1 atm. After all of the propane is
combusted, the product gas contains a 10.0:1 molar ratio of
CO2 to CO and leaves the boiler at 25°C. Heat from the boiler
is transferred to a pure water stream at 50°C and 1.0 bar, which
is converted into saturated steam at 20 bar, with no heat lost to
the surroundings in the process. What mass of water is heated
in this process?
Molecule
(Formula)
(kJ/mol)
-393.5 (g)
Carbon
dioxide
(CO2)
Carbon
-110.52 (g)
monoxide
(CO)
Hydrogen
(H2)
Nitrogen
(N2)
Охуgen
(O2)
Propane
(C;Hs)
Hot Water (out).
Flue
Gas Shutoff Valve -
Cold Water (in)
-119.8(1)
-103.8(g)
-285.84(1)
Gas Supply Line-
Cold Water
Shutoff Valve
Water
(H20)
-241.83(g)
Temperature /
Pressure Relief
Valve
Water Line
Overflow Pipe.
Tank Insulation
- Dip Tube
Drain Valve
Gas Burner Control-…
Chapter 9 Solutions
EBK ELEMENTARY PRINCIPLES OF CHEMICAL P
Ch. 9 - The standard heat of the reaction...Ch. 9 - Prob. 9.2PCh. 9 - Prob. 9.3PCh. 9 - The standard heat of the reaction...Ch. 9 - Prob. 9.5PCh. 9 - Prob. 9.6PCh. 9 - Prob. 9.7PCh. 9 - Prob. 9.8PCh. 9 - The standard heat of combustion of gaseous ethane...Ch. 9 - The standard heat of combustion (AH°) of liquid...
Ch. 9 - Prob. 9.11PCh. 9 - Prob. 9.12PCh. 9 - In the production of many microelectronic devices,...Ch. 9 - Prob. 9.14PCh. 9 - Prob. 9.15PCh. 9 - Prob. 9.16PCh. 9 - Prob. 9.17PCh. 9 - Carbon monoxide at 25°C and steam at 150°C are fed...Ch. 9 - Prob. 9.19PCh. 9 - Prob. 9.20PCh. 9 - Ethyl alcohol (ethanol) can be produced by the...Ch. 9 - Prob. 9.22PCh. 9 - Prob. 9.23PCh. 9 - Prob. 9.24PCh. 9 - Formaldehyde is produced commercially by the...Ch. 9 - Prob. 9.26PCh. 9 - Prob. 9.27PCh. 9 - Prob. 9.28PCh. 9 - Prob. 9.29PCh. 9 - A gas mixture containing 85 mole% methane and the...Ch. 9 - Ethylene oxide is produced by the catalytic...Ch. 9 - Cumene (C6H5C3H7) is produced by reacting benzene...Ch. 9 - Ethylbenzene is converted to styrene in the...Ch. 9 - Prob. 9.34PCh. 9 - Prob. 9.35PCh. 9 - Prob. 9.36PCh. 9 - Prob. 9.37PCh. 9 - Coke can be converted into CO—a fuel gas—in the...Ch. 9 - Prob. 9.39PCh. 9 - Prob. 9.40PCh. 9 - Prob. 9.41PCh. 9 - The equilibrium constant for the ethane...Ch. 9 - You are checking the performance of a reactor in...Ch. 9 - Hydrogen is produced in the steam reforming of...Ch. 9 - Prob. 9.45PCh. 9 - Five cubic meters of a 1.00-molar aqueous sulfuric...Ch. 9 - Prob. 9.47PCh. 9 - Prob. 9.48PCh. 9 - Prob. 9.49PCh. 9 - Calcium chloride is a salt used in a number of...Ch. 9 - A dilute aqueous solution of sulfuric acid at 25°C...Ch. 9 - A 2.00 mole% sulfuric acid solution is neutralized...Ch. 9 - A 12.0-molar solution of sodium hydroxide (SG =...Ch. 9 - Citric acid (C6H8O7) is used in the preparation of...Ch. 9 - Ammonia scrubbing is one of many processes for...Ch. 9 - Various uses for nitric acid are given in Problem...Ch. 9 - A natural gas is analyzed and found to consist of...Ch. 9 - Prob. 9.58PCh. 9 - A fuel gas is known to contain methane, ethane,...Ch. 9 - A fuel gas containing 85.0 mole% methane and the...Ch. 9 - A mixture of air and a fine spray of gasoline at...Ch. 9 - The heating value of a fuel oil is to be measured...Ch. 9 - Methanol vapor is burned with excess air in a...Ch. 9 - Methane at 25°C is burned in a boiler furnace with...Ch. 9 - Methane is burned completely with 40% excess air....Ch. 9 - A gaseous fuel containing methane and ethane is...Ch. 9 - A coal contains 73.0 wt% C, 4.7% H (not including...Ch. 9 - A mixture of methane, ethane, and argon at 25°C is...Ch. 9 - Prob. 9.69PCh. 9 - Prob. 9.70PCh. 9 - Prob. 9.71PCh. 9 - A bituminous coal is burned with air in a boiler...Ch. 9 - Prob. 9.73PCh. 9 - A natural gas containing 82.0 mole% CH4and the...Ch. 9 - Prob. 9.75PCh. 9 - Liquid n-pentane at 25°C is burned with 30% excess...Ch. 9 - Methane is burned with 25% excess air in a...Ch. 9 - Methane and 30% excess air are to be fed to a...Ch. 9 - Prob. 9.79PCh. 9 - In Problem 9.79, the synthesis of methanol from...Ch. 9 - Natural gas that contains methane, ethane, and...Ch. 9 - Prob. 9.82PCh. 9 - The wastewater treatment plant at the Ossabaw...
Additional Science Textbook Solutions
Find more solutions based on key concepts
List the important concepts that you learned from this chapter. Make a list of concepts that you are not clear ...
Elements of Chemical Reaction Engineering (5th Edition) (Prentice Hall International Series in the Physical and Chemical Engineering Sciences)
Find the complete time-domain solutions for the following differential equations using Laplace transforms: a. d...
Process Dynamics and Control, 4e
Write a version of the inner product procedure described in Problem 5.13 that uses 6 1 loop unrolling. For x86...
Computer Systems: A Programmer's Perspective (3rd Edition)
Porter’s competitive forces model: The model is used to provide a general view about the firms, the competitors...
Management Information Systems: Managing The Digital Firm (16th Edition)
The following program segment converts an angle in degrees to radians. const double PI= 3.14159; double degrees...
Starting Out with C++: Early Objects
File Letter Counter Write a program that asks the user to enter the name of a file, and then asks the user to e...
Starting Out with Java: From Control Structures through Data Structures (4th Edition) (What's New in Computer Science)
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, chemistry and related others by exploring similar questions and additional content below.Similar questions
- Feed gas containing of 78.5mol % H₂, 21% of N₂ & 0.5% of Ar is mixed with recycle gas and enters a reactor where 15% N₂ is converted to NH3 as per the reaction. Ammonia from the exit of the reactor is completely separated from unconverted gases. To avoid the buildup of inerts, a small fraction (5%) of the unreacted gases purged and the balance recycled. USING ASPEN/HYSYS Draw the process flow sheet Product rate and Purge rate Basis:100mol/hrarrow_forwardButane (C4H10)(C4H10) and dry air are fed to a combustion reactor at a steady rate of 45.9 mol/s45.9 mol/s butane and 2500.0 mol/s2500.0 mol/s dry air. Assume the butane reacts completely to produce CO2CO2 and H2O.H2O. The reactants enter the reactor at 25 ∘C25 ∘C and the products leave the reactor at 1110.4 ∘C.1110.4 ∘C. Calculate the percent excess air. Using the information below, find the heat interaction. Species ΔHf at 298 K(kJ/mol) CP (kJ/kmol·K) O2 0 3.5R N2 0 3.5R C4H10 -125.5 12R CO2 -393.5 3.5R H2O -241.8 3.5Rarrow_forwardA gaseous fuel containing methane and ethane is burned with excess air. The fuel enters the furnace at 25°C and 1 atm, and the air enters at 200°C and 1 atm. The stack gas leaves the furnace at 800°C and 1 atm and contains 5.32 mole% CO2, 1.60% CO, 7.32% O₂, 12.24% H₂O, and the balance ₂. 1. Calculate the molar percentages of methane and ethane in the fuel gas and the percentage excess air fed to the reactor. 2. Calculate the heat (kJ) transferred from the reactor per cubic meter of fuel gas fed. 3. A proposal has been made to lower the feed rate of air to the furnace. State advantages and a drawback of doing so.arrow_forward
- 1. Fresh air containing 4.00 mole % water vapor is to be cooled and dehumidified to a water content of 1.70 mole% H20. A stream of fresh air is combined with a recycle stream of previously dehumidified air and passed through the cooler. The blended stream entering the unit contains 2.30 mole% H2O. In the air conditioner, some of the water in the feed stream is condensed and removed as liquid. A fraction of the humidified air delivered to the cooler is recycled and the remainder is delivered to a room. Taking 100 mole of dehumidified air delivered to the room as a basis of calculation; calculate the moles of fresh feed, moles of water condensed, and moles of dehumidified air recycled. Recycle stream (R) Fresh air (F) Dehumidifier → 100 moles Water removed (Y)arrow_forwardA steady-state process to recover crystalline potassium chromate (K,CrOz) from an aqueous solution of this salt is required. Four thousand kilograms per hour of a solution that is one-third K,CrO, by mass is joined by a recycle stream containing 36.4% K2CrO7, and the combined stream is fed into an evaporator. The concentrated stream leaving the evaporator contains 49.4% K,CrO; this stream is fed into a crystallizer in which it is cooled (causing crystals of K,CrO, to come out of solution) and then filtered. The filter cake consists of K,CrO, crystals and a solution that contains 36.4% K,CrO, by mass; the crystals account for 95% of the total mass of the filter cake. The solution that passes through the filter, also 36.4% K,CrO,, is the recycle stream. 1- Draw the flowchart of the system and put all known information. 2- Calculate the rate of evaporation, the rate of production of crystalline K,CrO7, the feed rates that the evaporator and the crystallizer must be designed to handle, and…arrow_forwardA mixture containing 42 wt% benzene (B) and 58 wt% toluene (T) is fed to a distillation column at a flow rate of 100 kg per minute. The product steam leaving the top of the column (the overhead product) contains 90 wt% benzene and 85 wt% of the total benzene fed to the column exits in this overhead product stream. Calculate the mass flow rate and mass composition of the product stream leaving the bottom of the column. Calculate the volumetric flow rate of the overhead product, assuming that it exits the distillation column as a vapour stream at 82C and 1 atm (abs). Physical Property Data (S.G.= specific gravity) from table B-1: Benzene S.G. = 0.879 MW = 78.11 g/mol Toluene S.G. = 0.866 MW = 92.13 g/mol Water Density = 1.00 kg/L MW = 18.02 g/mol R = 0.08206 L atm/mol Karrow_forward
- (5) The emissions from a manufacturing process contain gaseous pollutant that cause odors and fumes. The company plans to incinerate the 5,000 acfm exhaust stream. Estimate the volumetric (standard) flowrate of natural gas fuel required to increase the waste gas stream temperature from the initial 80°F to the required temperature of 2500°F. Energy (enthalpy) is transferred from the fuel to the gas. Neglect any possible heat losses in this process. The average net heating value of natural gas is 850 - 1050 Btu/std-ft. Include a diagram of the scenario.arrow_forward4.64. The gas-phase reaction between methanol and acetic acid to form methyl acetate and water CH;OH + CH3COOH = CH3COOCH3 + H2O (A) (В) (C) (D) takes place in a batch reactor. When the reaction mixture comes to equilibrium, the mole fractions of the four reactive species are related by the reaction eqilibrium constant Ky : = 4.87 YAYB (a) Suppose the feed to the reactor consists of n40,NB0, NCo, NDO, and no gram-moles of A, B, C, D, and an inert gas, I, respectively. Let į be the extent of reaction. Write expressions for the gram-moles of each reactive species in the final product, nA(2), nB(3), nc(E), and np(3). Then use these expressions and the given equilibrium constant to derive an equation for , the equilibrium extent of reaction, in terms of n20,.., N1o. (see Example 4.6-2.) (b) If the feed to the reactor contains equimolar quantities of methanol and acetic acid and no other species, calculate the equilibrium fractional conversion. (c) It is desired to produce 70 mol of methyl…arrow_forwardSolid calcium (CaF2) reacts with sulfuric acid to form solid calcium sulfate and gaseous hydrogen fluoride. The HF is then dissolved in water to form hydrofluoric acid. A source of calcium fluoride is fluorite ore containing 96 wt% CaF2 and 4% SiO2. In a typical hydrofluoric acid manufacturing process, fluorite ore is reacted with 93 wt% aqueous sulfuric acid, supplied 15% in excess of the stoichiometric amount. Ninety-five percent of the ore dissolves in the acid. Some of the HF formed reacts with the dissolved silica in the reaction 6 HF + SIO2 (aq) – H2SİF6 (9) + 2 H2O (1) The hydrogen fluoride exiting from the reactor is subsequently dissolved in enough water to produce 60 wt% hydrofluoric acid. Calculate the quantity of fluorite ore needed to produce a metric ton of acid. Express your answer into three significant figures.arrow_forward
- ethylene oxide is prepared by oxidation of ethylene. 100Kmol of ethylene and 100Kmol of O2 are charged to a reactor.The percent conversion of ethylene is 85 and percent yield of C2H4O is 94.12. Calculate the composition of product steam leaving the reactor .The reactions taking place are: C2H4+0.5O2=C2H4O C2H4+3O2= 2CO2+2H2Oarrow_forwardAn ether solution of cyclohexane-1,2-dicarboxylic acid (CDA), a compound with two carboxyl (COOH) groups, was extracted with a 10.0% NAHCO3(aq) solution. Assume that reaction between cyclohexane- 1,2-dicarboxylic acid (CDA) and NaHCO:(aq) goes to completion:i.e., the limiting reagent (CDA) is used up and both carboxyl groups of the acid react. HO HO cyclohexane-1,2-dicarboxylic acid In the space below, provide the balanced chemical equation for the complete deprotonation of cyclohexane-1,2-dicarboxylic acid (CDA) by sodium bicarbonate, in which both carboxyl groups react. Provide chemical structures ( not molecular formulae) of all reactants/reagents & products:arrow_forwardThe production of cement results in significant GHG emissions. The emissions are caused by the decomposition of calcium carbonate (limestone) to calcium oxide (lime) and carbon dioxide. This process known as calcination, is carried out in kilns. Therefore, additional GHGs are emitted as a result of heating the kilns. A large cement manufacturer uses a mix of coal, natural gas, and biomass in its boiler. This mix produces the following amounts of GHGs per Million BTUs of energy: • 250 lbs CO2/MMBtu • 5 lbs CH4/MMBtu • 0.36 lbs N2O/MMBtu Process carbon emissions from the calcination process produce 925 lbs of carbon dioxide per metric ton of cement. In addition, the plant uses 1.7 Million BTUs of energy per metric ton of cement. If the plant produces 180,000 metric tons of cement annually, how many metric tons of CO2e does it emit?arrow_forward
arrow_back_ios
SEE MORE QUESTIONS
arrow_forward_ios
Recommended textbooks for you
ChemistryChemistryISBN:9781305957404Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCostePublisher:Cengage Learning
ChemistryChemistryISBN:9781259911156Author:Raymond Chang Dr., Jason Overby ProfessorPublisher:McGraw-Hill Education
Principles of Instrumental AnalysisChemistryISBN:9781305577213Author:Douglas A. Skoog, F. James Holler, Stanley R. CrouchPublisher:Cengage Learning
Organic ChemistryChemistryISBN:9780078021558Author:Janice Gorzynski Smith Dr.Publisher:McGraw-Hill Education
Chemistry: Principles and ReactionsChemistryISBN:9781305079373Author:William L. Masterton, Cecile N. HurleyPublisher:Cengage Learning
Elementary Principles of Chemical Processes, Bind...ChemistryISBN:9781118431221Author:Richard M. Felder, Ronald W. Rousseau, Lisa G. BullardPublisher:WILEY
Chemistry
Chemistry
ISBN:9781305957404
Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste
Publisher:Cengage Learning
Chemistry
Chemistry
ISBN:9781259911156
Author:Raymond Chang Dr., Jason Overby Professor
Publisher:McGraw-Hill Education
Principles of Instrumental Analysis
Chemistry
ISBN:9781305577213
Author:Douglas A. Skoog, F. James Holler, Stanley R. Crouch
Publisher:Cengage Learning
Organic Chemistry
Chemistry
ISBN:9780078021558
Author:Janice Gorzynski Smith Dr.
Publisher:McGraw-Hill Education
Chemistry: Principles and Reactions
Chemistry
ISBN:9781305079373
Author:William L. Masterton, Cecile N. Hurley
Publisher:Cengage Learning
Elementary Principles of Chemical Processes, Bind...
Chemistry
ISBN:9781118431221
Author:Richard M. Felder, Ronald W. Rousseau, Lisa G. Bullard
Publisher:WILEY
Mod-01 Lec-23 Degrees of freedom analysis; Author: nptelhrd;https://www.youtube.com/watch?v=c4h85JjrkzQ;License: Standard YouTube License, CC-BY
Introduction to Degrees of Freedom; Author: LearnChemE;https://www.youtube.com/watch?v=tW1ft4y5fQY;License: Standard Youtube License