Concept explainers
(a)
Interpretation:
Draw and label of the given stream of batch process with the expression for molar and mass flow rates for benzene in terms of the total molar flow rate of the stream.
Concept introduction:
Molar flow rate is explained as the number of moles that passes through an area in per unit time.
Similarly, mass flow rate is that particular mass of any content which passes through an area in per unit time.
(b)
Interpretation:
Draw and label of the given stream with the expression for the mass of nitrogen(kg) in terms of total moles(n mol) of this mixture.
Concept introduction:
Mass flow rate is that particular mass of any content which passes through an area in per unit time.
(c)
Interpretation:
Draw and label of the given stream with the expression for the molar flow rate of ethane (
Concept introduction:
Mass flow rate is that particular mass of any content which passes through an area in per unit time.
(d)
Interpretation:
Draw and label of the given stream with the expression for the molar flow rate of O2 and for the mole fractions of H2 O and O2 in the gas in terms of
Concept introduction:
Molar flow rate is explained as the number of moles that passes through an area in per unit time.
Mole fraction is the fraction of a particular content present in total mixture mole.
(e)
Interpretation:
Draw and label of the given stream with the expression for the gram-moles of N2 O4 in terms of n (mol mixture) and
Concept introduction:
Molar flow rate is explained as the number of moles that passes through an area in per unit time.
Want to see the full answer?
Check out a sample textbook solutionChapter 4 Solutions
EBK ELEMENTARY PRINCIPLES OF CHEMICAL P
- Calculate the values for log Kow and the saturated aqueous solubility (Cw$sat) for bisphenol A. The value for log Kow is 3.62 ; enter your answer as X.XX The value for Cwsat is ; report your answer in units of moles/liter and enter it as X.XX×10(-X). Bisphenol A is closest to "phthalates" H3C CH3 HO HO,arrow_forward-3 . The densities of pure water and ethanol are 997 and 789 kg · m respectively. The partial molar volumes of water and ethanol are 17.8 × 10-³ and 55.2 × 10-³ L.mol-¹, respectively. Part A Calculate the change in volume relative to the pure components when 3.25 L of a solution with Tethanol = 0.524 is prepared. Express your answer to two significant figures and include the appropriate units. AV = 3.24 μà L ?arrow_forwarda tank contains 100 gal of brine made by dissolving 80 lb salt in water. Pure water runs into the tank at the rate 4 gal/min and the mixture,kept uniform by stirring, runs out at the same rate. The outflow runs into a second tank which contains 100 gal of pure water initially and the mixture, kept uniform by stirring, runs out at the same rate. Find the amount of salt in the second tank after 1 hourarrow_forward
- A STOCK SOLUTION containing 0.1581 g/L K2CrO4 was prepared.In order to make the CALIBRATION STANDARD, 5 ml of the STOCK was transferredinto a 50ml volumetric flask and then diluted with an appropriate solvent.Calculate:(a) The ppm of K2CrO4 in the CALIBRATION STANDARD.(b) The molarity of K2CrO4 in the CALIBRATION STANDARD. (c) Calculate the molar absorptivity of K2CrO4 (at 371.0 nm). Assume that Beer's Law isobeyed over this concentration range.At 371.0 nm, this CALIBRATION STANDARD in a cell of path length 1.00 cm gave a %T of 59.752.arrow_forwardA standard solution is prepared by diluting the stock solution and used in chemical analysis for preparing the standard curve. Larutan piawai disediakan dengan melakukan pencairan larutan stok dan digunakan dalam analisis kimia untuk penyediaan lengkuk piawai. A) Illustrate how do you prepare a stock solution of 0.01 g of NaNO2 in one liter of distilled water in laboratory.arrow_forwardExpress concentration of 1.55 mol% caffeine (CSH10N4O2) in wt solute/ 100 wt solvent. Solvent is hexane (C&H4).arrow_forward
- You have a solution that contains 4.0g of oxalic acid dissolved in 100ml of water. this solution is placed in a separatory funnel, and then 100ml of diethyl ether is added to the separatory funnel and an extraction is performed. (Diethyl ether and water are immiscible solvents.) Use the following constant to calculate how much oxalic acid is in each solvent after extraction. Solubility of Oxalic acid in water=9.5g/100ml Solubility of Oxalic acid in ether=16.9g/100mlarrow_forwardIn the laboratory, a student was tasked to prepare a stock solution of HCl for titration. The available analytical grade HCl solution in the stock room was labelled 35% w/v HCl. The student proceeded to prepare the stock solution by mixing 10mL of the HCl solution with 490mL of analytical grade water. Then, the solution was further diluted by adding 5mL, since the total volume of the solution did not reach the 500mL etched mark on the volumetric flask. To prepare the titrant, the student mixed 10mL of the stock solution, then added 40mL of analytical grade water. The titrant was subsequently used to determine the concentration of two titrand. *Use the table as a reference 1. What is the normality of the available HCl reagent in the stock room?* 5.08 N 10.15 N 20.3 N 11.0 N None of the choices 2. What is the normality of the stock solution of HCl?* 0.09N 0.10N 0.11N 0.12N None of the choices 3. What is the normality of the titrant?*…arrow_forwardSO4 -two content in 7689mL of a water sample was precipitated as Na2SO4. The precipitated was filtered, washed and calcined in an empty crucible with a mass of 27.0234g. The mass of the crucible plus Na2SO4 (142g/mol) was 27.7708g. Calculate the %m/v of Na (23g/mol) and the concentration of Na in the sample in ppm.arrow_forward
- A polymer of large molar mass is dissolved in the organic solvent tetrahydrofuran (C4H8O) at 25 °C, and the resulting solution rises to a final height of 12.7 cm above the level of the pure solvent, as solvent molecules pass through a semipermeable membrane into the solution. If the solution contains 3.61 g polymer per liter, calculate the molar mass of the polymer. Take the density of the solution to be 0.886 g cm³³. g mol-1 Molar mass polymer =arrow_forwardA 25.00mL wastewater sample was analyzed for its Mg2+ content using a standard gravimetric method. the sample was diluted to 3.00L and an 11.00mL aliquot was treated to precipitate magnesium as MgNH4PO4.6H2O using (NH4)2HPO4 as the precipitating agent. the precipitate was then filtered, washed, dried, and ignited resulting in a 0.1325mg Mg2P2O7 residue. How much Mg (in ppm) is present in the original samplearrow_forwardIf a student combines specific amount CaCl2. 9H2O and Na2CO3 and obtained a solid precipitate. The student dissolve 1.37 gram of CaCl2. 9H2O in 25.0 mL of water and 0.984 g of Na2CO3 in 25.0 mL of water. The student is then combining the two solutions and observed the formation of a solid precipitate. The student filter the solution and recovered the precipitate. The following data were obtained for the experiment. Initial Mass of CaCl2. 9H2O 1.37 g Initial Mass of Na2CO3 0.984 g % yield of this experiment 87.4% 1. What is the balanced equation for this experiment?arrow_forward
- Chemistry & Chemical ReactivityChemistryISBN:9781337399074Author:John C. Kotz, Paul M. Treichel, John Townsend, David TreichelPublisher:Cengage LearningEBK A SMALL SCALE APPROACH TO ORGANIC LChemistryISBN:9781305446021Author:LampmanPublisher:CENGAGE LEARNING - CONSIGNMENT